15-5 PH round bar

15-5 PH Round Bar

UNS S15500 hex bar and 15-5 PH stainless steel bar suppliers in UAE

What is 15-5 PH round bar?

15-5 is a type of older 17-4 stainless steel. It was made of chromium, nickel, and copper. 17-4 and 15-5 PH Round Bar have a lot of strength. They have moderate corrosion resistance. The 15-5 PH SS Bar maintains high strength at approximately 600 degrees F. It is used for aircraft components. A 15-5 PH Bar is martensitic precipitation hardening stainless steel. It has 15 % chromium and 5 % nickel (approximately). The strength of a 15-5 PH Rounds can be further increased by a single heat treatment one at a low treatment.

Verified Supplier

available 6 cars

15-5ph round bar equivalent, chemical composition and properties | Find the right suppliers and ask for latest price

15-5ph round bar specification

15-5ph round bar properties

Tired with over thousands listed companies? A free B2B platform where only 10 specialized and verified suppliers can be found for 1.4545 stainless steel bar in the Middle East

What is the hardness of 15-5 PH stainless steel bar?

The H90 condition of a 15-5 PH Stainless Steel Bar has a tensile straight of 190,000 psi. Its hardness Rockwell is C40. The H1025 condition has a tensile straight of 155,000 psi. Its hardness Rockwell is C35. The H1075 condition has a tensile straight of 145,000 psi. Its hardness Rockwell is C32. The H1150 condition has a tensile straight of 135,000 psi. Its hardness Rockwell is C28. A 15 5 PH Round Bar is used in applications requiring better corrosion resistance and transverse properties when compared to other similar grades.

AMS5659 key h1025 flat bar and 1.4545 steel rod with MSDS/ MTC reports

What is 1.4545 steel rod used for?

A 1.4545 steel is used for aerospace and chemical industries. Besides these, there are many other uses for a 1.4545 Steel Rod. It is used for food processing, paper, and general metalworking industries. It is also used for aircraft components and fasteners. DIN 1.4545 Square Bars are the steels that have chromium and steel. It provides the best combination of properties of martensitic and austenitic grades. Since they have a large amount of chromium, they are highly resistant to corrosion. The finished products made using this have advanced mechanical properties.

AMS 5659 steel bar and DIN 1.4545 square bars stock available in solenoid quality

What is stainless steel 15 5 PH bar heat treatment?

The heat treatment of 15-5 is- H900, H925, H1025, H1075, H1100, H1150, Double H1150, and H1150M (Modified.) the heat treatment of a 1.4545 Stainless Steel Bar is A+ or annealed. It is done in full, soft, or spheroid form. It is also N+ (normalized), NT+ (Normalized and tempered), QT+ (quenched and tempered), AT+ ( annealed), and P+(precipitation hardened). A Stainless Steel 15 5 PH Bar can be heat treated at low temperatures for a short time. It is done to minimize scaling and distortion. It is removed when it is precipitation hardened at a low temperature.

Choose from a variety of sizes and lengths of UNS S15500 hex bars and 15 5 PH round bar

Application of AMS 5659 steel bar

An AMS steel bar is used in many places and industries. An AMS 5659 Steel Bar is used in aerospace structural components, valves, gears, and shafts. It is also used in oil and gas components and nuclear reactor components. An AMS5659 H1025 Flat Bar has exceptional strength of precipitation hardening. A UNS S15500 Hex Bars are used in hollow shafts and nuclear reactor components. It is also used in marine gas turbine compressor sections and aircraft components. It is used for various purposes. It also finds usage in engine pacers and gears.