Find suppliers of ss 17 4ph plate in UAE and discover more about the 17-4ph stainless steel vs 304
Without wasting any time click on pipingmaterial.ae to check out best and credible 17-4ph stainless steel sheet manufacturers in UAE.
It is one of the most trusted B2B platform for piping material only providing you with 100% verified and genuine limited manufacturers and suppliers who are offering you high quality products along with their contact details so that you can easily communicate with them and get all your doubts cleared.
17-4 ph stainless steel plate specification | Contact verified suppliers for affordable prices in UAE
|0.032″ to 0.1425″
|0.1875″ to 2.500″
|0.032″ to 0.1.425″
|Cold-rolled, hot-rolled, heat treated, annealed
|Wooden Pallet, Brown Paper
|2D, 2B, No. 3, No.4, No.8, BA
- Jindal Stainless
- Nippon Metal
- Arcelor Mittal
- ASTM A 693
- AMS 5604
- ASME SA 693
- Edge preparation
- Sawing and shearing
- Mechanical processing
- Oxy-propane Flame
|At pipingmaterial.ae all 17-4ph stainless steel sheet supplier offer
|Sheet vs Plate vs Foil
- Mill Test Certificate
- Free sample
- Free quote
- NABL Approved Lab Reports
- EN 10204 3.1
- Testing report
- ss 17 4ph foil thickness :> 0.15mm
- 17-4 ph stainless steel plate thickness: < 6.35 mm
- UNS s17400 sheet thickness: < 0.15mm and > 6.35mm
- Surgical instrumentation
- Chemical processing equipment
- Base plates
- Oil and petroleum refining equipment
|Method of machining
- Planning and Shaping
- Tapping and Threading
- Sawing and Cutting Off
- Rolling plate/ sheet
- Clad Plate
- Plain sheet
- Flat shim/ sheet
- Half Hard
- Quarter Hard
- Spring Hard
- Flattening Test
- Flaring Test
- Hardness Test
- Mechanical Testing
- Chemical Analysis
- Intergranular Corrosion Test
- UNS S17400
- Full round
- Slit edge
Are you expecting several Middle East importers and stockists to offer ASTM a240 UNS s17400 strips and coil at reasonable prices? Get the most recent pricing list and learn about magnetic properties
Werkstoff nr. 1.4542 checker plate Are widely used in the aerospace, oil and gas industries due to their high ductility and toughness.
It has strong weldability and fabricability properties.
UNS S17400 Cold rolled Plate possesses high tensile strength, durability and strong mechanical properties.
Find traders of ASME sa 240 Werkstoff nr. 1.4542 checker plate and perforated sheet with custom thickness available in Dubai at competitive prices. Also, see the forging temperature
There are 5 important methods involved in the fabrication of the 17-4ph SS rolling sheets which includes:
Heat treatment- the sheets are processed through solution-annealed condition.
Hot forming- in this process uniform heating of the full solution anneal present with the material up to temperature range of 950-12000C is required followed by cooling lower than 250C is recommended.
Cold forming- this process is used to enhance the resistance towards tress corrosion. This method is only applicable to plates.
Cutting- mechanical cutting which includes abrasive waterjet, bandsaw, shearing and machining is preferred.
Welding- the sheet can easily be welded by industrial standard methods which include GTAW, PAW, SMAW and GMAW.
Check the largest stocking distributor of ss 17-4ph hot and cold rolled plates with polished and mirror finish in accordance with the standards here, check the temperature range
Yes, 17-4 stainless steel rolling plate has good corrosion resistant properties against general environmental corrosions.
The sheets are sensitive to chloride stress corrosion cracking and lead to formation of brittle fractures.
If the danger of chloride stress corrosion cracking persists then higher temperature up to range more than 5500C is recommended and against hydrogen sulfide solutions a temperature range of 5900C is recommended for SS 17-4ph Hot rolled Plate.
You’re not required to pay for trash! Many suppliers of 17-4ph stainless steel clad plates and rolling sheets offer cut-to-length services. Check 17-4 stainless steel vs 17-4 ph
There are two widely used inspection testing which are used for 17-4 stainless steel sheet to ensure the quality standards of the material and make sure that the material is adhering to industrial standard.
Visual and dimensional inspection testing both are used to detect visible flaws or damages present in the material.
ss 17 4ph plate mechanical properties, composition and equivalent