22D Pipe Bend

22D Pipe Bend

The pipe bends are used in industries like the automotive, kitchenware, furniture, structural, and construction industries. The 22D Pipe Bend means that it is a bend with a very large bending radius, that the radius is actually 22 times bigger than the outer diameter of the pipe. This kind of setup is used to change direction in different angles without excerpting much pressure on the bend walls so that the pressure drop is very less. The 22D Induction Bend is made up of any material but with induction heating. Larder radius bends are difficult to make manually because they have to maintain consistency throughout the bend.

Verified Supplier

Verified manufacturers and stockists

available 5 cars

Get connected with trusted and genuine carbon steel 22d bend suppliers in UAE

22D pipe bend specifications

Manufacturing Size Of ASME B16.9 22D Bend Forming Types Of Large Size 22D Pipe Bend Coatings
  • Buttweld : 1/2″ To 24″
  • Welded : 12″ to 80″
  • Seamless : ½” to 48″

Buy material only from reliable 22D pipe bend manufacturers & suppliers in UAE

  • Hot & Cold forming
  • Black coating
  • Epoxy coatings
  • 3PE coatings
  • FBE coatings
ASME Standards Of 22D Elbow Manufacturing Method Of 22D Bend Radius End
  • ASME B16.49 – Wrought steel butt welding
  • ASME B31.4 – Pipeline transportation for liquids
  • ASME B16.9 – Factory made wrought buttwelding
  • ASME B31.8 – Gas transmission piping systems
  • ASME B16.25 – Butt welding ends
  • ISO 15590-1
  • MSS SP-97
  • Bar
  • Plate & sheet
  • Fusion-welded pipe
  • Seamless pipe
  • Forgings
  • Bevel
  • Buttweld
  • Plain
Surface Finish Of 22D Large Diameter Pipe Bend 22D Bend Weight Calculation Documentation
  • Rust proof black oil
  • Hot galvanized
  • Transparent oil
  • θ = Angle
  • T = Wall Thickness
  • D = Diameter
  • L = Weight of double sides straight length
  • R = Radius
  • Heat treatment charts
  • MTC (Material test certificates)
  • Welding procedure specification
  • Raw material test reports
22D Large Size Pipe Bending Thickness Common Considerations For Buying 22R Bend Connection Way
  • SCH 10
  • SCH 20
  • SCH 40
  • SCH STD
  • SCH 60
  • SCH 80
  • SCH XS
  • SCH 160
  • SCH XXS
  • SCH 180
  • Size
  • Temperature ratings
  • Pattern taper
  • End connections
  • Materials
  • Dimensions
  • Design
  • Coatings
  • Marking
  • Tolerances
  • Threading
  • Welding
Angle Of 22R Elbow Application For 22.5d Degree Bend Pipe 22D Long Sweep Elbow Marking
  • 15 Degree
  • 20 Deg
  • 30 Degree
  • 45 Deg
  • 60 Degree
  • 90 Deg
  • 135 Degree
  • 180 Deg
  • Water Treatment
  • Gas fittings
  • Oil and Gas
  • Marine Applications
  • Power Generation
  • Chemical Processing
  • Hydraulic system
  • Handling the expansion
  • Air brake fittings

Oman, South Africa, Egypt, Middle east, USA & Saudi Arabia have been receiving 22D pipe bend from these suppliers for more than five years. There is physical proof of them

  • Sizes
  • Origin of country
  • Pressure class
  • Material & grade
  • Heat Number
  • Thickness- schedule
  • ASTM standard
  • Manufacturer name/ logo
Welding Technique Of 22D Long Radius Bend Testing Of 22D Seamless Bend Bending Method
  • TIG welding (Tungsten inert gas)
  • FCAW welding (Flux cored arc)
  • SMAW welding (Shielded metal arc)
  • GMAW welding (Gas metal arc)
  • Mechanical testing
  • Beveling machine
  • Hydrogen-induced cracking (HIC)
  • Universal testing machine
  • Thickness gauge
  • Hardness tester
  • Hydro testing
  • Magnetic particle examination
  • Charpy testing
  • Eddy current test
  • Corrosion testing
  • Liquid penetrant inspection
  • Ultrasonic Test
  • Tensile bending
  • Press bending
  • Heating bending
  • Compression bending
  • Roll bending
  • Mandrel bending
  • Liquid filling bending
Process Of 22D Pipeline Bends Heat Treatment Popular Types Of 22D Bends
  • Squeezing
  • Forging
  • Machining
  • Pressing
  • Bending
  • Normalizing
  • Normalizing and tempering
  • Quenching and tempering
  • Solution annealing
  • Buttweld 22D pipe bend
  • Seamless 22D pipe bend
  • 22D exhaust pipe bend
  • High pressure 22D bending
  • 22D 90 degree short radius bend
  • 22D 45 degree short radius bend
  • 22D LR bend
  • 22D SR bend
  • Welded 22D pipe bend
  • 22D 90 degree long radius bend
  • 22D 45 degree long radius bend

 

Buy 22d pipe seamless bend at affordable prices from genuine carbon steel 22d long sweep bend manufacturers in Dubai

22D large diameter pipe bend material

22D 45 deg bend

22D 45 deg bend

22D 90 degree bend

22D 90 degree bend

22D 180 degree pipe bend

22D 180 degree pipe bend

Long radius 22D bend

Long radius 22D bend

Short radius 22D bend

Short radius 22D bend

22D piggable bends

22D piggable bends

22D return bends

22D return bends

22D mandrel bends

22D mandrel bends

22D hot induction bend

22D hot induction bend

 

22D large diameter pipe bend material

Stainless Steel 22D Pipe Bend Carbon Steel 22D Pipe Bend Alloy Steel 22D Pipe Bend
  • ASTM A403 WP304 22D large diameter pipe bend
  • ASTM A403 WP304L
  • ASTM A403 WP316 22D large size pipe bending
  • ASTM A403 WP316L
  • ASTM A403 WP310
  • ASTM A403 WP321
  • ASTM A403 WP347 22D pipe bend
  • ASTM A403 WP904L
  • ASTM A234 WPB 22D bend pipe
  • ASTM A420 WPL6 22D elbow
  • LTCS 6R bend
  • ASTM A860 WPHY 52
  • ASTM A860 WPHY 60 22R bend
  • ASTM A860 WPHY 65
  • ASTM A234 Grade WP5
  • ASTM A234 Grade WP9 22R elbow
  • ASTM A234 Grade WP11 22.5D degree bend pipe
  • ASTM A234 Grade WP22
  • ASTM A234 Grade WP91
Nickel Alloy 22D Bend Copper Nickel 22D Bend Titanium 22D Bend
  • Inconel 600: ASTM B366 UNS N06600
  • Inconel 601 : ASTM B366 UNS N06601
  • Inconel 625 22D pipe bend : ASTM B366 UNS N06625
  • Incoloy 800 : ASTM B366 UNS N08800
  • Incoloy 825 22D pipe bend : ASTM B366 UNS N08825
  • Hastelloy C276 22D pipe bend : ASTM B366 UNS N10276
  • Hastelloy C22 : ASTM B366 UNS N06022
  • Monel 400 22D pipe bend : ASTM B366 UNS N04400
  • Monel K500: ASTM B366 UNS N05500
  • Alloy 20 : ASTM B366 UNS N08020
  • Copper nickel 90/10 : ASTM B466 UNS C70600
  • Copper nickel 70/30 : ASTM B466 UNS C71500
  • EEMUA 234 22D long sweep elbow
  • Titanium Grade 2 : ASTM B363 UNS R50400
  • Titanium Grade 5 : ASTM B363 UNS R56400
Duplex Steel 22R Bend Super Duplex 22R Bend API 22R Bend
  • ASTM A815 UNS S31803 22D short radius bend
  • ASTM A815 UNS S32205 large size 22D pipe bend
  • ASTM A815 UNS S32760 22D large diameter bend
  • ASTM A815 UNS S32750 22D large size elbow
  • API 5L 22D pipe bend
  • API 5L Grade A 22D long radius bend
  • API 5L Grade B 22D seamless bend
  • API 5L X42 22D pipeline bends
  • API 5L X52 22D induction bend
  • API 5L X60 90 degree 22D pipe bend
  • API 5L X65 45 deg 22D pipe bend
  • API 5L X70 22D welded bending
Aluminum 22D Pipe Bending Copper 22D Pipe Bending Mild Steel 22D Pipe Bending
  • Grade 6061 : ASTM B361 UNS A96061
  • Grade 5083 : ASTM B361 UNS A95083
  • ASTM B62 UNS C12200 22D piggable bend
  • BS EN 10241
  • BS 1740
  • BS 1387

 

22D pipe bending machine parameter chart

O.D. Range System Thrust Bending Radius Bending Angle M.F Power
(MM) (T) (KW)
60~219 64 20D O~180° 160~200

 

22D seamless bend price list

  • Type : 90 degree
  • Radius : Long
  • Diameter : 22D
  • Grade : ASTM A403 WP304
NPS Price in US Dollar Price in UAE Dirham Price in Saudi Riyal
8″ US $178.60 AED 655.92 SAR 669.97
10″ US $213 AED 782.26 SAR 799.02
16″ US $315 AED 1156.86 SAR 1181.64
24″ US $453 AED 1663.67 SAR 1699.31
30 US $646 AED 2372.48 SAR 2423.30

Get fastest quote via live chat, contact directly above listed manufacturers for custom fabrication.

Differences between 22D pipe bend vs 22D elbow

  • Bending radius
  • Manufacturing processes
  • Different cost
  • Application scope

 

Check 22d bend dimensions, difference, and radius calculation of hot induction 22d bend, purchasing long radius 22d piggable bends suppliers directly saves your cost and time

Although bends are made at different angles and radii, their main difference is the material make. The Stainless Steel 22D Pipe Bends are made up of stainless steel. The additional benefit of stainless steel over other standard materials is that it is of low cost. Stainless steel is in fact the most commonly used piping material. There are different grades of stainless steel that can withstand general corrosion and have good temperature and pressure resistance.

The terms are sometimes used interchangeably. Commonly, the elbow has a sudden turn and has to withstand much pressure due to the sudden directional change of the material flowing inside the pipe. The Buttweld 90 Degree 22D Pipe Bend has a bending radius that has a radius 22 times the outer diameter. But the large diameter elbow has a larger diameter. Depending on your need for piping, you will have to decide whether you need a bend or an elbow.

To measure the bend radius, the bend has to be stood against a wall. The center point of the bend along the center line is one point for measurement. The point where the floor meets the wall is the next point for measurement. The distance between these two points is the bending radius. The 45 Deg Short Radius 22D Bends and other angled bends have the same radius but differ in other aspects.

Don’t forget to check additional features and weight calculation of buttweld 90-degree 22d pipe bend, alloy steel 22d pipeline bends offers mtc and mill test certificate en 10204/3.1b

Carbon Steel 22D Long Sweep Bend is a special type of bend. There are piggable bend types that are used for the maintenance and cleaning of pipelines. The pig is a cleaning equipment that is sent through the 22D Welded Bending into the pipeline. If the bend has no added accessories or customized physical features attached, then the weight of the bend is calculated by the total volume of the material used in the bend multiplied by the density of the material used.

Importer of 45 deg short radius 22d bend in the middle east, view find complete information about the 22d welded bending manufacturing process

The larger bending radius requires longer pipes and hot-forming processes. The forming can take place inside a machine that involves rotary and mandrels. The pipe is placed inside the pressurizing arms and mandrels are placed inside the Alloy Steel 22D Pipeline Bends. The mandrels maintain the internal diameter when the pipe is bent. The other method is hot induction. The Hot Induction 22D Bend is made by heating up the pipe on an induction coil, bending it by hydraulic pressure and then cooling it in water or under cool air.