3 way diverting valve suppliers in UAE
Why do we use 3 way mixing control valve?
They are used to mix 2 different fluids into one section. Or to divert the flow of fluid from one part to 2 different parts. 3 way diverting control valve is usually used to divert the fluid from a common section to 2 different sections. Whereas, 3 way mixing control valve mixes the fluid arriving from different sections.
Talk to multiple trusted 3 way diverting ball valve suppliers and buy 3 way mixing & diverting valves at the factory price
How does 3 way diverting valve work?
These valves are available in either a T shape or an L shape. The flow pattern of these valves is determined by the structure of the valve. 3 way stainless steel diverting ball valve available in a T shape is designed to divert the fluid coming from 1 section into 2 directions. Whereas, 3 way mixing diverting control valve that is designed in an L shape is used to merge the fluid coming from 2 directions into one single direction. These fluids can be the same or different depending upon the application that it is being used. 3 way mixing & diverting valves is said to be the most cost effective way to divert or mix. It is said to be ideal for cooling or heating different media such as oil, gas, water, or chemicals.
Neumatic 3 way mixing diverting globe control valve and 3 way stainless steel diverting ball valve are available in many end connections such as buttweld or socket weld, flanged or threaded
What happens when 3 way diverting ball valve fails?
In case the valve fails there are chances that the liquid will leak and spill all over the system. thus, leading to a complete halt in the production process until it is fixed. Most 3 way diverting ball valve failures are due to the buildup of dirt or deposition of sediments. This makes it difficult for the valve to open or close. One other reason for 3 way pneumatic mixing & diverting control valve failure is that the elastic used to seal the valve gets worn out over a period of time.
3 way mixing diverting control valve and 3 way diverting control valve for high-temperature applications in the middle east
When should a 3 way mixing & diverting valves be replaced?
When you notice that the elastic is worn out due to the liquid or gas being pushed out constantly it is time to replace it. One can also avoid such ware and tear and frequent replacement requirement by turning down the intensity of liquid flowing through it. The pneumatic 3 way mixing diverting globe control valve needs replacement in case the inner packing of the valve is also damaged due to the wearing out of elastic.
Contact 3 way pneumatic mixing & diverting control valve suppliers in the middle east and Africa as per ASTM a351, a494 & a182 American specifications
How do you fix a clogged 3 way diverting control valve?
The use of cement glue that is solvent can also cause these valves to clog. That in turn causes it to stick inside the valve and prevent it from turning. 3 way mixing diverting globe control valve then needs to be removed and cleaned. A leak can also happen in case there is damage to the O’Ring at the nuts. 3 way temperature control mixing valves are mostly used in hydronic cooling and heating system. They provide the desired temperature fluid. This happens by mixing fluid from a higher temperature with fluid returning from the heating source that might be at a lower temperature.
