303 Stainless Steel Sheet

303 stainless steel sheet

What is 303 stainless steel sheet ?

The SS 303 stainless steel sheet is an austenitic grade of steel. A 303 Stainless Steel Sheet is designed with a chemical composition of chromium, nickel, and other constituting alloys. These sheets have enhanced resistance to corrosive affluents and oxidative reducers. The 303 stainless sheet is employed to work in applications to save weight and add an aesthetical outlook to the application. The thickness of sheets is greater than 0.5mm, but less than 6mm, similar to a 303 ss plate.

The stainless 303 grade has excellent physical and mechanical properties. A stainless steel 303 Sheet has a minimum tensile strength of 500mpa with minimum proof stress of 190mpa. These sheets can be easily elongated by 35% in the system. The ASTM A240 UNS S30300 Strips have a density of 8.03 g/cm3 and a melting point of 1455 degrees C. The strips can be easily welded using standard procedures. The SS 303 Coil are rolled sheets that are wound after the initial processing. These coils can be later cut in different dimensions. The 303 stainless steel sheet price varies based on its thickness and chemical requirements.

Verified Supplier

available 9 cars

303 stainless steel sheet thickness, equivalent, sizes, spec sheet, composition and mechanical properties | Call now for estimated price in Dubai

303 Stainless Steel Sheet Specification

303 Stainless Steel Sheet Properties

Are you looking for 303 ss plate suppliers in UAE And Middle East countries who offer a range of forms and sizes from approved mills, see 304 stainless steel vs 303

304 stainless steel vs 303

The 304 and 303 stainless steel belong to the austenitic grade of the 300 series. The SS 303 Hot rolled Plate, and the SS 304 have the same chemical content. However, the SS 303 grade has a higher sulfur content. This allows the UNS S30300 Cold rolled Plate to be easily machined. The SS 304 grade has slightly higher corrosion resistance properties than the SS 303 grade.

The SS 304 is highly weldable and has good machinability. A 303 stainless Rolling Plate is not really weldable; however, they have outstanding machinability. Depending on the type of application, both grades can be used accordingly. The 303 stainless steel Clad Plate costs slightly higher than the SS 304 grade.

 

Buy ss 303 coil and strips from an independent stockist and importer in Dubai, available in different sizes from 0.10 to 3.90 mm in thickness and 20 to 650 mm in width, see application

 

What is 303 stainless steel used for?

The SS 303 stainless steel is used in applications that require them to be heavily machined. The 303 SS Rolling Sheets are a common feature in gears, shafts, switchgear components, and aircraft fittings. Steel is also seen in screws, nuts, bolts, bushings, and so on.

 

Get cut to size ASTM a240 UNS s30300 perforated sheet of popular brands such as Jindal, Posco, Aperam, Outokumpu, ThyssenKrupp and many more at the lowest cost, see the hardness

 

How hard is 303 stainless steel sheet ?

The stainless steel 303 Sheet is designed with a hardness of 262 HB max.

 

Meet the most fast-growing distributors and traders of Werkstoff nr. 1.4305 checker, hot rolled and cold rolled plate to meet customer needs, check the condition

 

What is 303 stainless steel condition a ?

The condition a specification of the SS 3003 steel is a high corrosion resistance grade. The ASME SA240 grade 303 checker plate is annealed as it goes through the heat treatment method making it more ductile. This gives the Werkstoff Nr. 1.4305 Perforated Sheet extra anticorrosive edge. These properties make it a good choice in harsh conditions.

 

Reach out to the no1 303 stainless steel clad plate, rolling, and flat sheet manufacturer and exporter in India and Asia with 2b, mirror, polished finish, see the testing method

 

How to test 303 stainless steel sheet ?

The most common test in employed for the Stainless steel 303 sheet is the magnet test. Here you can take a magnet and attach it to test your steel. If it sticks, it is not an austenitic grade; however, if the magnet doesn’t stick, it is the SS 303 grade.