304 Stainless Steel Sheet

304 Stainless Steel Sheet

What are the different finishes available in 304 Stainless Steel Sheet? Is there any difference in cost?

  1. No. 1 Finish- this hot-rolled, annealed and pickled finish comes with a dull and rough surface. Approximate cost is AED 6-7 per square foot and approximate time: 2-3 hours.
  2. No. 2D Finish- this cold-rolled, annealed and pickled finish has a smoother and brighter surface than No. 1 Finish. Approximate cost: AED 7-8 per square foot and approximate time: 2-3 hours.
  3. No. 2B Finish- it is a smooth, bright, and reflective finish achieved by cold rolling the 304 stainless steel sheet followed by annealing and pickling it. Approximate cost: AED 8-9 per square foot. Approximate time: 3-4 hours.

These are approximate costs and times- it can vary with specific project and location- the same goes for 16 gauge ss 304 sheet. There may also be additional costs for labor, equipment, and other materials- consult with a professional for an accurate estimate.

SS 304 sheet suppliers verification by the team of pipingmaterial.ae

Verified SS 304 sheet suppliers

Verified Supplier

Verified stockists and suppliers

available 9 cars

Verified suppliers of ASTM A240 SS 304 Plate including Polished, Brush and Mirror Finish with sheet sizes of 48” x 120” in stock

ASTM Spec for SS 304 sheet

Stainless Steel 304 Sheet specification

 

Choose Eminent Stockist of high-quality 1/2/3 mm ASTM A240 UNS S30400 Clad Plate in Middle East, see SS 304 sheet price per kg in Dubai

 

Stainless Steel Sheet 304 Price List

Size1.25mtr * 5mtr Size1.25mtr * 6mtr Size1.5mtr x 5mtr Size1.5mtr x 6mtr
Thickness in MM USD/ Pcs USD/ Pcs USD/ Pcs USD/ Pcs
3 US $395.07 474.08 474.08 568.90
3.3 US $395.07 521.49 521.49 625.79
4 US $473.24 624.68 624.68 749.61
4.76 US $563.15 743.36 743.36 892.04
5 US $591.55 780.85 780.85 937.01
6 US $697.18 920.28 920.28 1104.34
6.35 US $737.85 973.96 973.96 1168.76
8 US $918.31 1212.17 1212.17 1454.60
9.5 US $1090.49 1439.45 1439.45 1727.34
10 US $1140.85 1505.92 1505.92 1807.10
12 US $1369.01 1807.10 1807.10 2168.52
12.7 US $1448.87 1912.51 1912.51 2295.02
Thickness in MM Size1.25mtr * 5mtr Size1.25mtr * 6mtr Size1.5mtr x 5mtr Size1.5mtr x 6mtr

 

ASME SA240 Werkstoff Nr. 1.4306 Rolling Sheets trader, largest stock ranges of Stainless Steel 304 Hot and Cold rolled Plate in UAE

 

304 stainless steel plate vs sheet

The terms sheets and plates are used interchangeably in many instances in the industry. However, a 304 stainless steel plate is different from a sheet based on a range of factors listed below.

The ss 304 plate is designed with a thickness between 6mm and can extend to 150mm or more as per different requirements. The 304 stainless plate is utilized in applications that require higher strength and performance that is not possible with sheet metal. The 1.4301 plate is seen in structural applications, machinery, bridges, reinforcing columns, and various construction equipment. The price of an 18 gauge 304 stainless steel plate starts at $2.8 based on its thickness.

304 stainless steel plate vs sheet

Most Common Types of 304 Stainless Steel Plate

304 Stainless Steel Sheet

304 Stainless Steel Sheet

ASTM A240 SS 304 plate

ASTM A240 SS 304 plate

304 Stainless Steel Sheet #4 Brushed Finish

304 Stainless Steel Sheet #4 Brushed Finish

UNS S30400 Cold rolled Plate

UNS S30400 Cold rolled Plate

SS 304 Hot rolled Plate

SS 304 Hot rolled Plate

Mirror Finish Stainless Steel 304 Plate

Mirror Finish Stainless Steel 304 Plate

Werkstoff Nr. 1.4306 Rolling Sheet

Werkstoff Nr. 1.4306 Rolling Sheet

304 Stainless Steel Flat Sheet Metal =

304 Stainless Steel Flat Sheet Metal

SS 304 Hot rolled Plate

SS 304 Hot rolled Plate

 

An unparalleled width and thickness of 304 Stainless Steel Flat Sheet Metal in UAE. Get a Quote. Download Spec Sheet

 

What are the standard thickness range and sizes? In what maximum size it is available with stockist and manufacturers?

1.4301 plate is available in various thicknesses and sizes- the standard thickness range between 0.018″- 0.187″ and sizes are 48″ x 96″, 48″ x 120″, 60″ x 120″, and 72″ x 120″.

The manufacturers and stockists may have different sizes available depending on their inventory and production capabilities- They can also produce custom sizes of 304 stainless steel plate as per client request. You can check with your suppliers to know about the sizes available with them.

 

304 Stainless Steel Sheet Thickness

Stainless Steel 304 Sheet Thickness

 

Importer of 18/14/16 gauge Stainless Steel 304 hairline finish Sheet Supplied nationwide in full range of standard and special sizes

 

finishes of 304 sheet metal

SS 304 Sheet Finishes

 

Sizes of 1.4301 plate

Sizes of 1.4301 plate

 

What the the maximum temperature that ss 304 sheet can withstand?

The stainless steel 304 sheet has good high temperature resistance- it can withstand temperatures up to about 800 degrees C without experiencing significant scaling or oxidation.

 

In which condition is stainless steel 304 sheet rust ?

It’s crucial to keep in mind that 304 stainless steel can corrode but won’t rust under typical atmospheric circumstances. Only harsher settings or circumstances where the steel’s composition contains impurities cause stainless steel to corrode.If exposed to seawater or other corrosive conditions repeatedly over time, stainless steel can in fact rust and corrode.

condition is stainless steel 304 sheet rust

SS 304 plate Gauge Chart

SS 304 plate Gauge Chart

 

What is 304 Stainless Steel Sheet Bend Radius ?

What is 304 Stainless Steel Sheet Bend Radius

 

Cutting of ASTM A240 Type 304 Sheet

Cutting of ASTM A240 Type 304 Sheet

304 polished stainless steel sheet flatness tolerance

304 polished stainless steel sheet flatness tolerance

 

Hardness of Brushed Stainless Steel 304 Sheet

Stainless Steel 304 Sheet Hardness

 

UNS S30400 Clad Plate Weight chart

UNS S30400 Plate Weight

What is the lead time for orders of AISI 304 stainless steel sheets to import in UAE?

The lead time for orders of AISI 304 stainless steel sheets to import in UAE depends on the supplier- the timeline can depend on whether you need a standard or shear cut to size order. To get the exact time frame contact the supplier directly- there you can inquire about their lead time for importing ASTM A240 type 304 material products to UAE.

Expert’s advise to reduce cost

  1. Buy in large quantities or bulk- this will help you to get a discount.
  2. Choose standard or shear cut to size orders instead of laser orders- this will help to reduce lead time and cost.
  3. Opt for the No.3 finish instead of the No.4 finish to save cost- even though it also depends on the size of the SUS 304 clad plate.
  4. See if the suppliers have any promotions and offers to get discounts or free shipping on stainless steel 304 hairline finish sheet.

Which welding and cutting technique are best for 304 stainless steel sheet and why?

The best welding technique for brushed 304 stainless steel sheet is TIG welding or Gas Tungsten Arc Welding- it offers high quality, versatility and longevity. It produces a clean and precise weld with minimal distortion- it can be used on thin sheets. TIG welding also allows for better control of the heat input- this is important for preventing warping and cracking. Plasma cutting is a common technique used for cutting ss sheets.

What are the yield strength, maximum allowable stress, hardness , and thermal expansion coefficient

  1. Yield strength of ss 304 mirror finish plate is 205 MPa.
  2. Maximum allowable stress is 140 MPa at room temperature- It keeps decreasing with increasing temperature
  3. Hardness is 88 HRB (Rockwell B hardness)
  4. Thermal expansion coefficient is 17.2 µm/m°C from 0-100°C.

Is it possible that ASTM A240 Type304 sheet be coated with other materials? If so, which methods are advised by the experts?

Yes, it is possible to coat UNS S30400 Cold rolled Plate with other materials- it helps to enhance its properties or add functionality to the surface. The type of coating and the method of application will depend on the intended use and property improvement of the material. Some common coating methods are electroplating, physical vapor deposition, chemical vapor deposition and powder coating.