316 Stainless Steel Sheet

Negotiate a great deal from verified Astm A240 SS 316 Plate suppliers in United Arab Emirates

 

316 Stainless Steel Sheet

 

What is 316 Stainless Steel Sheet?

A stainless 316 steel sheet is a thin metal grade. The 316 stainless steel sheet is thicker than a foil but thinner than a plate. This is why the sheets are designed in thicknesses below 6mm but above 0.5mm. The SS 316 sheet is utilized in different structures where strength and tolerance are not the top requirements. The polished 316 stainless steel sheet is one of the many types of finishes that can be achieved from this grade. Brushed and mirror are the two other types of finishes. The 316 stainless steel sheet price starts at $2 to $3 for 1-2 mm sizes. As the size or thickness of the material increases, the price also increases.

Pipingmaterial.ae Team’s Verification Of SS 316 Sheet Supplier

Verification Of SS 316 Sheet Supplier

Verified Supplier

Verified Suppliers

available 6 cars

 

Must Know Below Facts

  • A annealed state of the sheet is frequently offered.
  • Sometimes gauge or inches are used in place of thickness.
  • Usually, thickness is expressed in millimetres, with the maximum thickness of a sheet being 6mm.
  • Standard pre-cut sheet sizes normally range from 4 feet (1.2 metres) to 6 feet (1.8 metres) broad and up to 10 feet (3 metres) long.

 

Stainless Steel Plate 316 Specification

Specification ASTM A240 / ASME SA240 Grade 316
Width 10mm to 2500mm
Thickness 0.1mm – 100 mm Thk
Available Sizes
  • Hot rolled: 3.0mm–10.0 mm
  • Cold rolled : 0.5mm-6.4 mm
Length 2.44m, 2m, 3m, or cut to size
Tolerances (thickness & width)
  • EN 10088 Stainless Steel 316 strips
  • EN 10151 ASTM A240 SS 316 Strips
  • EN 10258/ DIN 59381)
Finish of Surface satin, Cold rolled sheet (CR), BA NO (8), SATIN (Met with Plastic Coated), 2B, 1D, No.1 finish hot rolled, BA, 2D, No.4, 2B, 8K, mirror, brush, Hot rolled plate (HR), hairline etc.
Americam / European Standard
  • EN ISO 9445
  • ASTM A 959
  • ASTM A 480
  • ASME IID
  • EN 10051
  • EN ISO 18286
  • ISO 15510
  • EN 10088-1
Hardness types Half Hard, Soft, Spring Hard, Quarter Hard, Hard,

 

Price of SS 316 Sheet

Size 8 “x 8”, Grade 316 (Hot Rolled)
Thickness Price USD/Pcs
0.25 in US $87
0.375 in US $127
0.5 in US $147
0.625 in US $185
0.75 in US $222
1 in US $296

 

Which is More Expensive: 304 Or 316 Stainless Steel ?

The austenitic stainless steel grades 304 (1.4301) and 316(1.4401) are two of the most popular types. The alloys found in stainless steel’s composition have a significant impact on how much it costs. In general, 316 is a more expensive grade of metal because it has a minimum 2.0% molybdenum content, which makes it significantly more corrosion resistant than 304.

 

Various Types of ASTM A240 UNS S31600 Plate

SS 316 Sheet

SS 316 Sheet

Stainless Steel Plate 316

Stainless Steel Plate 316

Polished 316 Stainless Steel Sheet

Polished 316 Stainless Steel Sheet

UNS S31600 Clad Plate

UNS S31600 Clad Plate

Mirror Finish Stainless Steel 316 Plate

Mirror Finish Stainless Steel 316 Plate

Stainless Steel 316 Hot rolled Plate

Stainless Steel 316 Hot rolled Plate

Brushed Stainless Steel 316 Sheet

Brushed Stainless Steel 316 Sheet

SS 316 Flat Sheet =

SS 316 Flat Sheet

DIN 1.4401 Polished Plate

DIN 1.4401 Polished Plate

 

Buy cut to size ASME SA240 UNS S31600 Hot and Cold rolled Plate Stock in Middle East, Get All thickness and sizes

 

Is SS 316 Sheet more corrosion resistant?

A stainless 316 sheet is designed containing a supreme chemical composition of chromium, nickel, molybdenum, and other constituting alloys. This gives the 316 stainless sheet good corrosion resistance, allowing it to work in harsh environments. The austenitic grade has enhanced tolerance to pitting and crevice corrosion in chloride environments. The 316 stainless steel sheet thickness allows it to be easily welded, as it resists intergranular corrosion.

 

Sizes of DIN 1.4401 Sheet

Weight per
sheet (kg)
Size(mm) Weight
per sheet (kg)
Size (mm)
55.3 3000 x 1500 x 1.5 112.0 3000 x 1500 x 3.0
44.2 3000 x 1500 x 1.2 73.7 3000 x 1500 x 2.0
30.7 2500 x 1250 x 1.2 51.2 2500 x 1250 x 2.0
38.4 2500 x 1250 x 1.5 77.5 2500 x 1250 x 3.0

 

316 Stainless Steel Sheet Thickness

Thickness Available Sizes Thickness Surface Area per Unit weight Approx Weight per Sheet
inches mm kg/m² lbs/ft² kg lbs
0.015 36 x 96 0.381 3.07566 0.630 6.84936 15.12
0.015 36 x 120 0.381 3.07566 0.630 8.5617 18.90
0.0178 36 x 96 0.45212 3.690792 0.756 8.22195 18.15
0.0178 36 x 120 0.45212 3.690792 0.756 10.27404 22.68
0.0178 48 x 96 0.45212 3.690792 0.756 10.95807 24.19
0.0178 48 x 120 0.45212 3.690792 0.756 13.69872 30.24
0.0235 30 x 96 0.5969 4.921056 1.008 9.13248 20.16
0.0235 30 x 120 0.5969 4.921056 1.008 11.4156 25.20
0.0235 36 x 96 0.5969 4.921056 1.008 10.95807 24.19
0.0235 36 x 120 0.5969 4.921056 1.008 13.69872 30.24
0.0235 36 x 144 0.5969 4.921056 1.008 16.43937 36.29
0.0235 48 x 96 0.5969 4.921056 1.008 14.61378 32.26
0.0235 48 x 120 0.5969 4.921056 1.008 18.26496 40.32
0.0235 48 x 144 0.5969 4.921056 1.008 21.92067 48.39
0.0291 30 x 96 0.73914 6.15132 1.260 11.4156 25.20
0.0291 30 x 120 0.73914 6.15132 1.260 14.2695 31.50
0.0291 36 x 96 0.73914 6.15132 1.260 13.69872 30.24
0.0291 36 x 120 0.73914 6.15132 1.260 17.1234 37.80

 

Genuine trader of Werkstoff Nr. 1.4401 Rolling Sheet and Plate of Jindal, POSCO, Aperam, Outokumpu,Thyssenkrup and many more brand accordance with international standards

 

What can cause 316 stainless steel plate to rust?

Stainless steel 316 plate has a superior chemical composition giving them good resistance and tolerance. A 316 stainless plate is prone to rust or corrode over a period of time. Generally, these plates corrode if they go above temperatures of 600 degrees C or more. The stainless steel plate 316 can be reduced by chlorides when they are exposed to seawater or chloride rich environments. The 1.4401 plate requires constant cleaning to prevent them from corroding after repeated exposure.

cause 316 stainless steel plate to rust

 

Find here Genuine Supplier of below Brands

Find here Genuine Supplier of below Brands

 

Thickness Tolerance of 316 Stainless Sheet

Specified Thickness Stainless Steel Tolerance
0.025″ | 0.64 mm 24 Gauge ± 0.003″ | 0.08mm
0.109” | 2.78mm 12 Gauge ± 0.009″ | 0.23mm
0.120″ | 3.05 mm 11 Gauge ± 0.005″ | 0.13mm
0.063” | 1.59mm 16 Gauge ± 0.006″ | 0.15mm
0.078” | 1.98mm 14 Gauge ± 0.007″ | 0.18mm
0.038” | 0.95mm 20 Gauge ± 0.004″ | 0.10mm
0.050” | 1.27mm 18 Gauge ± 0.005″ | 0.13mm
0.031″ | 0.79 mm 22 Gauge ± 0.004″ | 0.10mm

 

Distributor of 316 Stainless Steel Clad Plate, buy high quality SS 316 Polished Plate in various finish and delivery condition

 

316 Sheet Metal Surface Finish

Ex-mill Cold Rolled Finishes Special Finishes Ex-mill Hot Rolled Finishes
2C 1J or 2J 1E
2Q 2W
2B 1G or 2G 1C
2E 1P or 2P 1U
2D 1K or 2K 1D
2R 1M or 2M
2H 2F
1S or 2S
2L

 

SS 316 Rolling Plate vs Flat Sheet

An SS 316 rolled plate is spirally rolled having thicknesses of above 6mm. A flat sheet is designed in thicknesses between 0.5mm to 6mm. The 316 steel plate has superior strength and provides support to different applications. Flat sheets are used to add a shiny, aesthetical appeal to structures. They are not preferred where tight tolerances are required as that in SS 316 plate.

 

HS Code of 316 Stainless Steel Sheet

HS Code Description
72199090 Size: 1200mm X 2400mm X 6mm SS 316 Plate
72199090 316 SS Sheet 5mm Thick
84799040 SS 316 Quality Fabrigated 14 Swg Thick Sheet
72199090 SS 316 2mm Thick Sheet
72199090 SS 316 Sheet

 

Purchase 20 Gauge 316 Stainless Steel Sheet for a reasonable price in Dubai, with top-notch customer service and prompt delivery in the entire UAE

 

SS 316 Flat Sheet Delivery Condition

SS 316 sheet are delivered in an annealed state

 

How to Buy the material at lowest price always?

A 20 gauge 316 stainless steel sheet material can always be availed at low prices by following these simple tricks. Purchase in bulk to get discounts and eliminate the risk of shortage. Find alternative grades that offer the same properties as the expensive grade. Check with different outlets to find the lowest Ss 316 sheet price suited for your requirements.

 

Brushed Stainless Steel 316 Sheet Weight Chart

Weight per
sheet (kg)
Size (mm) Weight per
sheet (kg)
Size (mm)
17.9 2500 x1250 x0.7 32.7 2000 x1000 x2.0
11.5 2000 x1000 x0.7 55.3 3000 x1500 x1.5
23.0 2500 x1250 x0.9 73.7 3000 x1500 x2.0
38.4 2500 x1250 x1.5 112.0 3000 x1500 x3.0
14.7 2000 x1000 x0.9 51.2 2500 x1250 x2.0
19.6 2000 x1000 x1.2 63.9 2500 x1250 x2.5
25.6 2500 x1250 x1.0 40.9 2000 x1000 x2.5
44.2 3000 x1500 x1.2 49.6 2000 x1000 x3.0
30.7 2500 x1250 x1.2 92.1 3000 x1500 x2.5
24.6 2000 x1000 x1.5 77.5 2500 x1250 x3.0

 

316 Stainless Steel Rolling Plate Chemical Composition

ASME SA 240 Mo Si C N P Mn S Cr Ni
SA 240 316 2.00 – 3.00 1.0 max 0.08 max 67.845 min 0.045 max 2 max 0.030 max 16.00 – 18.00 11.00 – 14.00

 

Mechanical Properties of Stainless Steel 316 Hot rolled Plate

ASTM A240 Density Psi / Mpa – Tensile Strength Melting Range Psi / Mpa – Yield Strength (0.2%Offset) % Elongation
ASTM A240 Gr 316 8.0 g/cm3 MPa – 515
Psi – 75000
1400 °C (2550 °F) MPa – 205
Psi – 30000
35 %

 

UNS S31600 Cold rolled Plate Equivalent

Grade Swedish
SS
Euronorm Old British UNS
No
Japanese
JIS
No Name BS En
316 2347 1.4401 X5CrNiMo17-12-2 316S31 58H, 58J S31600 SUS 316