330 stainless steel round bar

330 Stainless Steel Round Bar

330 stainless steel rod and SS 330 round bar suppliers in UAE

What is 330 stainless steel round bar?

330 Stainless Steel Round Bar is a corrosion-resistant and heat-resistant alloy that contains around 17–19% chromium, 19–22% nickel, 2% molybdenum, 1% manganese, and trace amounts of silicon, copper, and titanium. It offers excellent machinability and has high ductility when exposed to temperatures up to 1200°F (649°C). 330 Stainless Steel Round Bar is commonly used in aircraft exhaust systems and steam boiler tubes due to its oxidation resistance and high-temperature strength. This grade of stainless steel can be used in the manufacture of equipment for use in extreme temperatures, cryogenic tanks, petrochemical facilities, food processing equipment, and chemical process equipment.

Verified Supplier

available 4 cars

330 stainless steel round stock, lengths, sizes, specification, chemical composition and properties | Contact potential suppliers for ready stock

330 stainless steel round bar specification

330 stainless steel round bar properties

There is always room for better price, discover ethical suppliers of 330 stainless steel bar in the Middle East

What is AISI 330 SS bar used for?

A round bar made of 330 stainless steel is an example of an excellent heat- and corrosion-resistant form of stainless steel alloy known as a 330 stainless steel round bar. Because it possesses high mechanical qualities, it is an excellent choice for a wide variety of commercial and industrial applications. This grade of stainless steel can be used in the manufacturing of a variety of different types of equipment, including that which is used in environments with temperatures that are extremely low or extremely high, cryogenic tanks, petrochemical facilities, food processing equipment, and chemical process equipment.

Buy 330 stainless steel flat bar and SUS 330 square bar with Radiography and Eddy Current testing

What is 330 stainless steel flat bar tolerances?

330 Stainless Steel Flat Bar tolerances include thickness, width, straightness, camber, and out-of-square. The thickness of the flat bar may vary depending on the gauge and specification requirements. Typical flat bar thickness tolerances range from +0.004” to 0.014”. The width tolerance ranges from +0.125” to 0.000” depending on the size of the flat bar ordered. Straightness is typically measured as a maximum deviation in inches over a specified length (usually 10ft). For example, a 330 stainless steel flat bar with 1/8″ thickness and 4” width could have a maximum straightness tolerance of 0.062″. Out-of-square should not exceed 0.5 degrees per side for most applications.

ASTM A276 gr 330 hot rolled bar and SS 330 hex bar available in a broad stock range in Dubai

Is 330 stainless steel rod magnetic?

No, 330 stainless steel rods are not magnetic. It is an austenitic grade of stainless steel and is non-magnetic in its annealed condition. This alloy has good strength, corrosion resistance, and formability, but also offers high-temperature creep strength and oxidation resistance. Its regular properties include good weldability, excellent formability, superior toughness, and moderate thermal expansion coefficient. It has high corrosion resistance, strength, and good weldability due to its higher nickel content compared to other stainless steel alloys. It also has good weldability due to its higher nickel content compared to other stainless steel alloys.

DIN 1.4305 rectangular bar and stainless steel 330 hollow bars size range from 16mm to 125mm

Application of ASTM A276 type 330 rod

ASTM A276 Type 330 Rod is austenitic stainless steel that offers excellent resistance to corrosion and oxidation. This grade of rod is suitable for use in a wide range of applications, including food processing equipment, chemical processing plants, heat exchangers, and pharmaceutical manufacturing equipment. It is also used in marine and aerospace applications due to its strength and durability. In addition, this type of rod can be machined and welded for use in fabrication projects. In addition, it is an excellent electrical conductor with a low coefficient of thermal expansion which makes it suitable for use in heat exchangers and boilers.