37 degree flare fittings

37 degree flare fittings

A tube fitting that exhibits stronger characteristics is 37 degree flare fittings. This is because they are cold formed and they are much stronger when comparing machined parts.

Also, stainless steel 37 degree flare fittings are mainly used for flow control scenarios and fluid power applications. Adding to this, if you see bad flares, pipe burns due to flare size being wrong, it may leak.

Verified Supplier

available 10 cars

JIC 37 degree hydraulic fittings suppliers in UAE

Quality assured and cost effective JIC 37 degree hydraulic fittings can be obtained at pipingmaterial.ae platform where:

  • Customers can approach suppliers to get reasonable quoting of pricing. Since customers are charges expensive, they can help you provide reasonable pricing only for what needs and standards you aspire for.
  • These suppliers are 100% genuine and verified. So don’t worry for any scam or faulty services from them.
  • They are also experienced to guide you with the best suggestions that can help you meet your standards, and due to this, they are one of the prominent and leading 37degree flare fittings suppliers in UAE.
  • For getting specific size product, highly recommended for customers that they must contact the listed suppliers.

Specification of 37 degree flare fittings

Thread size Outer dimension Equivalent to
  • 1/8” to 1”
  • 6mm to 25mm Tube OD
  • VOSS
  • HY-LOK
  • DK-LOK

Above equivalent brands available with the listed 37 degree flare fittings suppliers & manufacturer in Dubai at pipingmaterial.ae

37 degree flared fittings stock Pressure Rating of 37° Flare Fittings Thread
  • JIC 37 degree Flare Hose Fittings
  • Metric Flare Fittings
  • SAE 37 degree Inverted Flare Fittings
  • Flared Tubing Fittings
  • 37° Double Flare Fittings
  • 37 degree flare hose fittings
  • Up to 5000 PSIG (344 BAR) at CWP
  • BSP
  • NPT
  • BSPT
  • SAE
Temperature Ranges Grades 37 deg flare fittings finishes
  •  Up to 426° C
  • 37 degree flared fitting for Carbon Steel Tubing
  • Stainless steel 37 degree flare fittings
  • Zinc Plated 37 degree flare fittings
  • Brass metric 37 degree flare fittings
  • SS 316 37 degree flare hydraulic fittings
  • MS (Military Standard)
  • Copper 37 degree flared fitting
  • Carbon Steel
  • Electroplated
  • Trivalent Zinc Plated
  • Yellow Platting
  • Black Phosphated
  • Short Blasted
  • Stainless Steel
  • Export Bright
Media Standard Applications of sae 37 degree fittings
  • Gas
  • Fluids
  • Petroleum
  • Fuels
  • Pneumatic
  • Water
  • MIL-F-18866 and SAE J514
  • Hydraulic
  • Gas & Fluid Handling
Equivalent Minimum Quantity Manufacturing process
  • UNS K30504
  • UNS S30400
  • UNS S31600
  • 10 Pcs or contact below listed stainless steel 37 degree flare fittings manufacturers for special request
  • Cutting, deburring & cleaning
  • Flaring
  • Flare inspection
  • Installation
Marking on JIC 37 degree flare fittings Advantages Free Sample
  • Size
  • Material
  • Manufacturers/ suppliers name & logo
  • Usable with Fractional Tubes
  • Vibration Resistance
  • Usable Hose Connection
  • Yes, you can directly contact to below listed verified 37 degree flare fittings suppliers in UAE for a quick quote
37 degree flare fittings types 37° Flare Fittings for Tube,
Tubing Outside Diameter (OD)
Connection Type
  • Adapter
  • Diagnostic
  • Compression / Flareless
  • Flange
  • Face Seal
  • Orifice
  • Flare
  • > 0 to 1/4 inch
  • > 1 to 1-1/4 inch
  • > 1-1/2 to 1-3/4 inch
  • > 1-1/4 to 1-1/2 inch
  • > 1-3/4 to 2 inch
  • > 1/2 to 3/4 inch
  • > 1/4 to 1/2 inch
  • > 2 inch
  • > 3/4 to 1 inch
  • SAE Straight Thread

Online marketplaces of carbon steel 37 degree flare fittings manufacturers & suppliers in Middle East countries

In an 37 deg AN, class 3A/3B UNJ/UNJF radius root threads covers for the manufacturing of male and female fittings. Adding to this, the tensile stress areas of fasteners also improves because the J screw threads inherits a root radius. This reduces stress in thread, and this is one of the reasons why it is used in aerospace and defence applications.

On the other hand, JIC 37 degree fittings are manufactured as per class 2A/2B UN/UNF thread series. Adding to this, balanced performance of the fastener, the manufacturing and convenience is covered by class 2A and 2B.

Buy directly from JIC 37 degree fittings manufacturers and save 5%-20% in Dubai

When one purchases a sae 37 degree flare, it is seen that the design mechanism is very efficient. It is also seen that these fittings embrace all other fitting types, comprising the smallest areas.

Adding to this, the fluid flow area is smaller than the seal area, resulting into a design that is efficient and provides high-pressure tolerance.

Brass 37 degree flare fittings and female JIC 37 degree in inch and metric sizes

Because of their unique design, wide range of industries demand for carbon steel 37 degree flare fittings. Other than this, below are some other benefits of its ideal use case:

Comprises a seat design as per SAE J514/IS0 8434-2.

They show excellent resistance to vibration, and deliver non-degraded performance.

Another benefit is that it comprises a host connection, which is widely usable.

Can also be used with fractional or tubes which are metric.

Stainless steel 37 degree flare fittings and JIC 37° female swivel available in different configurations and threads

There are many industries that widely use brass 37 degree flare fittings, and below comprises some of them:

  • For dealing with high pressure, recommended for use in fluid power.
  • They are also used to deliver fluids too.
  • Aeronautics and defence applications also demand for this flare because of its dimensional design.