Adjustable constant temperature type steam trap

Adjustable constant temperature type steam trap

What is the working principle of a steam trap?

Are you are looking for a steam trap that helps you to control the temperature of the condensate? Adjustable constant temperature type steam trap is just the answer you were looking for. temperature sensing is done by a Bimetal element that helps the user to adjust the temperature of the condensate. So does this exactly happen

A water seal is formed inside the body of the steam trap when the condensate enters it. The condensate flows out of the valves through the bottom of the bucket. The valve is maintained in the open position by the weight of the bucket. If the conditions include superheat or a low load the bucket may need to be primed before the system starts.

Verified Supplier

Verified stockists and wholesalers

Adjustable Constant Temperature Type Steam Trap Specification

Adjustable Constant Temperature Type Steam Trap Material

Bimetal type temperature control steam traps suppliers in UAE

Does a bimetal type temperature control steam trap reduce pressure?

These types of steam traps offer a wide range of pressure which in turn helps in controlling the temperature of the discharged condensate. The pressure to be used is determined by the temperature that has been set for the condensate. Bimetal type temperature control steam traps often use steam tracing to protect the systems and meters from freezing. This also helps in heating the liquids with high viscosity and ensures that it flows smoothly through the pipe.

Find multiple verified suppliers in middle east countries and buy A351 cf8 temperature control trap at factory price

What happens if you undersize an adjustable constant temp steam trap?

If the steam trap is undersized it will not be able to remove the condensate thus reducing the effectiveness over a period of time. It may also cause water hammer to occur. A351 cf8 temperature control traps are said to be water hammer resistant however if they are undersized this statement may not be true. One of the main disadvantages of these traps is that it has poor air venting capability and might leads to an intermittent discharge of condensate.

Request pricing directly from a351 cf8 temperature control traps manufacturers for the lowest price and ensured high quality of adjustable constant temp steam trap in GCC countries

What is the lifespan of a steam trap?

The lifespan depends upon the quality of the material used to make it. An average-quality steam trap may prove useful for 3-4 years. Whereas a superior quality steam trap like the ones produced by us is expected to last for 7-8 years. Adjustable constant temp steam traps are used fully in energy conservation. This is achieved as it discharges the condensate at a temperature below the saturation point of steam. This helps in using the heat from the steam as well making it energy efficient.

Buy adjusting type bimetal steam traps from KNPC approved suppliers at the best price, check temperature control traps sizes

How often do adjusting type bimetal steam traps fail?

It is expected that these steam traps have a longer service life. The bimetal element is protected from excessive forces by the over-expansion mechanism. Yet the failure rate is expected to be at 15 %-20% per year. Adjusting type bimetal steam trap need not be disconnected from the pipe to adjust the temperature of the condensate. While it is installed in the pipe it can still be reassembled.

Select the most reliable bimetal type temperature control steam traps suppliers in Bahrain, check ASTM a351 cf8 temperature control traps price in Dubai

Do you need a check valve after a temperature control trap?

The answer is YES! There is a risk of condensate reverse flow especially when several condensates are discharged in a common line. To avoid this it is important to use a check valve

One more feature of these Temperature control traps is that the clogs in the seat can be removed while it is attached to the valve. They are useful in steam tracing lines or storage tanks.