AISI 1055 round bar

AISI 1055 Round Bar

AISI 1055 steel bar suppliers in UAE

What is AISI 1055 round bar?

Shafts, springs, heavy machinery parts, and agricultural machinery are all recommended to be made out of the high-carbon, oil- or water-hardening tool and machinery steel 1055. Information is available from several sources regarding composition, physical characteristics, hardness, elasticity, and tensile properties.

Or, the AISI 1055 Round Bar is medium carbon steel with good machinability and weldability. Depending on the situation, hot forging or normalizing can be used to produce materials with high strength and impact resistance. Swords and knives, among other things, are made from 1055 Steel Round Bars. They are frequently inexpensive and easy to sharpen as a result. The German Institute for Standardization developed the DIN1.0535 Round Bar specifications.

Verified Supplier

Verified manufacturers and stockists

1055 steel round bar specification, chemical composition and mechanical properties

AISI 1055 round bar specification

AISI 1055 round bar properties

Discover knowledgeable SAE 1055 flat bar manufacturers and suppliers in the Middle East

What is tolerance of carbon steel 1055 round bar?

You should learn more about this material and how it compares to other types of carbon steel. With an average carbon content of 0.5-0.6%, the same is an alloy of the 10xx steel series. Good toughness and machinability are attributes of the Carbon Steel 1055 Round Bar.

The level of tolerance is specific. The size can change. The measurement system is plus and minus, and positive and negative variants are allowed according to the specified size. The tolerance in this situation is said to be approximately ±1%. C55 Carbon Steel Round Bar knives are generally inexpensive and easy to sharpen.

In Dubai, 1055 steel round bar and SAE1055 bright bar is available for a discounted rate per kg

What is 1055 steel round bar hardness?

1055 Steel Bar is a high carbon cold rolled steel containing approximately 0.50% carbon which can be hardened by heat treatment to a maximum hardness of approximately Rockwell C 58. A high Rockwell C rating means the steel tested is high tensile. Anything in the mid-50s and above on the Rockwell C scale is challenging.

1055 Hot Rolled Bar is a medium carbon structural mild steel containing 0.52% to 0.6% carbon. This makes it the most versatile among other alloy groups and is mainly used. Experts have gained immense confidence in it due to its stated principles.

Standard AISI 1055 carbon steel hex bar is delivered in a wide range of sizes and are offered in diameters ranging from 14 mm to 160 mm

Difference between 1055 hot rolled bar hardening and tempering conditions?

The hardening and tempering of the AISI 1055 Carbon Steel Round Bar are performed to give the components mechanical properties. The steels are heated to the correct hardening temperature (generally between 800-900°C) and kept at this temperature. Then it is quickly cooled, often in oil or water.

This steel is austenitized at 1475-1550ºF (800-845ºC), followed by quenching in water or oil, depending on the size and complexity of the section. SAE 1055 Carbon Steel Bar produces high surface hardness and good toughness when heat treated. Annealing is done as soon as possible when the temperature has dropped to room temperature.

Finding suppliers for DIN 1.0535 square bar in the Middle East countries? obtain the most recent carbon steel 1055 rounds factory prices and request quotes in Dubai

What is 1055 flat bar used for?

Flats are extruded bar products with a wide variety of uses. Flat bars are frequently used in fabrication projects where corrosion resistance and lightweight are priorities. Axles, bolts, forged connecting rods, crankshafts, torsion bars, light gears, guide rods, and other components are frequently made of 1055 Flat Bar.

One of the precipitation-hardening grades is most frequently used in the industry. It is capable of high performance even though it is soft and ductile when the solution is annealed.