SAE 1095 spring steel round bar suppliers in UAE
What is AISI 1095 steel round bar?
It is a type of Carbon steel that has high amounts of carbon. The other elements present in the alloy AISI 1095 steel round bar are- 0.4% Silicon and 1.2% Manganese. The trace elements in 1095 alloy are Aluminium, Molybdenum, Nickel, and Copper. The 1095 steel has high strength and exceptional hardness, yet it is very brittle. The alloy has a wide range of applications in cutting tools and springs. As cutting tools require sharp cutting edges, these are one of the best materials, especially for grass or grain-cutting instruments.
Verified manufacturers and stockists
1095 spring steel round bar specification, chemical composition and mechanical properties
If you are looking forward to not only the highest quality steel but also a cheap price of AISI1095 square bar stock suppliers in the middle east
How hard is 1095 round stock?
The 1095 steel is known for being very hard. The alloy is hardened using heat treatment and cold working. The following are the harness values of the 1095 Steel Round Bar:
- The Brinell Hardness value is 197.
- The Knoop Hardness value is 219.
- The Rockwell B Hardness value is 92.
- The Rockwell C Hardness value is 13.
- The Vickers Hardness value is 207.
The 1095 Spring Steel Hex Bar’s above hardness values complement the imperial values. Hence, 1095 steel is one of the most rigid materials.
Obtain a wide supply of AISI 1095 carbon steel rod and SAE 1095 steel bars with quick shipping & affordable prices.
Fabrication and Heat Treatment of 1095 round bar
The machinability of 1095 carbon steel is 45. The conventional forming techniques are helpful for AISI 1095 Carbon Steel Bar. However, the force required is much lower than other low-carbon steels. It can be welded using all welding techniques at pre-heated temperatures of 500 to 600 degrees Fahrenheit and post-heated temperatures of 1200 to 1450 degrees Fahrenheit.
The Heat treatment of 1095 Carbon Steel Bar is as follows,
- Hardening is possible at 1650 degrees Fahrenheit, followed by oil quenching and tempering.
- Forging of the alloy is possible at 1750 to 2150 degrees Fahrenheit.
- Annealing can be possible at 1650 degrees Fahrenheit.
- The hot working temperature of the alloy is between 200 and 900 degrees Fahrenheit.
Get 19-32 mm (0.75-1.25 in) of AISI 1095 spring steel bright bar cold drawn, spheroidized, annealed, and at any conditions in Dubai
How to identify 1095 steel rod?
The AISI/SAE numbering system is an excellent tool for identifying steel grades. The system has a 4-digit number for classification. The first two numbers indicate the type of steel and the concentration of the elements in the alloy. The last two numbers indicate the concentration of carbon in the SAE AISI 1095 Steel Rod.
The other methods of identification include various tests, like
- Spark Test.
- X-Ray Diffraction.
- Optical Emission Spectrometry.
- Modern Metal Testing Methods.
- X-Ray Fluorescence.
- Laser Induced Breakdown Spectrometer (LIBS)
Discover important information about SAE 1095 round bar and 1095 steel bars stock with a length of 1-12m/ customized in Dubai
What is 1095 hot-Rolled steel bar used for?
The 1095 steel bar has a wide range of applications. They are widely applicable for use in parts that are prone to wear resistance and flat springs that have high stress, like Harrow’s teeth, plow beams, etc. The 1095 Hot-Rolled Steel Bar’s high machinability and extreme hardness make its use versatile. It is especially of use in grass and grain cutting tools and springs.
