Unlike carbon steel, most alloy steel grades have better mechanical properties. They have a higher content of different elements like boron, manganese, nickel, sulphur, chromium, vanadium etc in their alloy. One such grade is AISI 4130 Fittings. The material has superior mechanical properties in comparison to carbon steel alloys. Low in carbon, the chemical composition of this alloy includes chromium and molybdenum as strengthening agents.
Find reputable SAE 4130 elbow and UNS G41300 tee suppliers in UAE
4130 alloy steel buttweld fittings specification
| AISI 4130 alloy steel buttweld fittings sizes | 4130 alloy weldable fittings strength | AISI 4130 alloy steel butt welded joint life |
|---|---|---|
|
|
|
| AISI 4130 UNS G41300 welded fittings coating | ASTM A234 WP11 meaning | AISI 4130 UNS G41300 welded fittings thickness tolerance |
|
|
|
| Chromoly AISI 4130 seamless pipe fittings meet the requirements | 4130 low alloy steel butt welding fittings American standard | SAE 4130 BW fittings temperature |
|
|
|
| American standard & specification | AISI 4130 steel butt weld fittings manufacturing technique | Ends of AISI 4130 steel buttweld fittings |
Buy directly from AISI 4130 pipe fittings suppliers offer TPI & 3.1 MTC, they |
|
|
| Chromoly AISI 4130 seamless pipe fittings schedule chart | AISI 4130 alloy steel butt welded joint testing reqirements | 7 manufacturing forms of Chromoly AISI 4130 butt welded fittings |
|
Easily get a quote from above listed AISI 4130 pipe fittings suppliers in UAE, factory |
|
| 4130 low alloy steel butt welding fittings bend radius | AISI 4130 chromoly steel pipe bend angle | AISI 4130 alloy steel butt welded joint bending method |
|
|
|
| 4130 alloy weldable fittings testing & inspection | Chromoly AISI 4130 seamless pipe fittings DIN standards (Germany) | SAE 4130 BW fittings EN standards (Europe) |
|
|
|
| AISI 4130 UNS G41300 welded fittings JIS standard (Japan) |
GOST standard (Russia) | AISI 4130 alloy steel butt welded joint applicable fluids |
|
|
|
| 4130 low alloy steel butt welding fittings marking | 4130 AISI weldable pipe fittings packaging | |
|
|
Quickly get pricing from genuine manufacturers of DIN 1.7218 concentric/ eccentric reducer and 4130 alloy steel pipe bend in Dubai
AISI 4130 alloy steel pipe bend
| Types | 4130 AISI weldable pipe fittings dimensions & standard | |
|---|---|---|
|
|
|
4130 Alloy Steel 45 Deg Elbow
Sae 4130 90 Deg Elbow
UNS G41300 180 Deg Elbow
WNR 1.7218 Long Radius Elbow
SAE X4130 Short Radius Elbow
4130 Steel 1D Elbow
| Types of 4130 alloy buttweld elbow | AISI 4130 chromoly steel elbow angle direction & degrees |
|---|---|
|
Contact above verified AISI 4130 pipe fittings suppliers & stockists for tested |
DIN 1.7218 Split Tee
Aisi 4130 75k Straight Tee
Aisi Sae 4130 Barred Tee
Aisi 4130 60k Reducing Tee
Aisi 4130 Chromoly Equal Tee
4130 Low Alloy Steel Lateral Tee
- SAE 4130 alloy steel buttweld tee
- 4130 alloy reducing tee
- AISI 4130 chromoly saddle tee
- AISI 4130 alloy steel barred tee
- 4130 AISI lateral tee
- AISI 4130 UNS G41300 Y tee
- 4130 alloy straight tees
- DIN 25crmo4 equal tee
- SAE 4130 steel swept tee
- AISI 4130 UNS G41300 reducing outlet tees
AISI 4130 Alloy Steel Concentric Reducer
AISI 4130 Chromoly Eccentric Reducer
DIN 25crmo4 buttweld reducer are manufactured via seamless & welded method, following forms
are available in all standard sizes as per ASME B16.9
- AISI 4130 chromoly eccentric reducer
- 4130 alloy concentric reducer
4130 alloy steel stub end & cap
AISI 4130 Reducing Cross
SAE 4130 Stub End
4130 Weld End Cap
AISI 4130 Seamless Fittings
AISI 4130 Buttweld Fittings
UNS G41300 Fittings
AISI 4130 Elbow
AISI 4130 Alloy Steel Gas Pipe Fittings
4130 Pipe Fittings
SAE-AISI 4130 Pipe Bend
- AISI 4130 alloy steel short stub end
- 4130 alloy lap joint stub end
- DIN 25crmo4 butt welded hemi-head pipe cap
- AISI 4130 chromoly collar
- SAE 4130 steel long stub end
25crmo4 steel buttweld cross fittings
- AISI 4130 alloy steel unequal cross (reducing)
- 4130 alloy straight crosses
- AISI 4130 chromoly reducing outlet crosses
- SAE 4130 steel equal cross
SAE 4130 alloy steel swage nipple
- AISI 4130 alloy steel concentric swage nipple
- AISI 4130 chromoly eccentric swage nipple (reducing)
End types AISI 4130 60k Swaged nipple
- PBE – Plain Both Ends
- PSE – Plain small end
- PLE – Plain large end
- TBE – Treaded Both Ends
- TSE – Treaded small end
- TLE – Treaded large end
- BBE – Beveled Both Ends
- BSE – Beveled small end
- BLE – Beveled large end
Chromoly AISI 4130 stub end specification
| 4130 low alloy steel stub end standard | 4130 alloy stub end schedule | Type of AISI 4130 chromoly steel stub end | Installed with |
|---|---|---|---|
| MSS SP-43 |
|
Type B | Slip On flange |
| MSS SP-43 |
|
Type A | Lap Joint flange |
| ASME B16.9 |
|
butt weld | Lap Joint flange |
Chromoly AISI 4130 seamless pipe fittings equivalent standard
| STANDARD | AFNOR | EN | JIS | BS | GOST | UNS | WERKSTOFF NR. |
|---|---|---|---|---|---|---|---|
| AISI 4130 | – | 25CrMo4 | JIS G4105 | BS 970 | – | G41300 | 1.7218 |
4130 low alloy steel butt welding fittings chemical composition
| Grade | C | Mn | S | Fe | Mo | Ni | Si | P | Cr |
|---|---|---|---|---|---|---|---|---|---|
| AISI 4130 | 0.28-0.33 | 0.40-0.60 | 0.025 MAX | 97.3-98.22 | 0.15-0.25 | 0.50 max | 0.15-0.35 | 0.035 max | 0.80-1.10 |
AISI 4130 alloy steel butt welded joint mechanical properties
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
|---|---|---|---|---|
| 0.28 | 2580 | 460 MPa | 560 MPa | 20 % |
Check AISI 4130 fittings types, heat and corrosion resistance, procure SAE 4130 alloy steel stub end for a reasonable price in the Middle East countries
Altering the chemical composition of any alloy yields different levels of corrosion resistance. Considering the composition of 4130 pipe fittings includes strengthening agents, these fittings exhibit good strength even at higher temperatures. The tensile strength of these AISI 4130 Buttweld Fittings is good up to a temperature of 600°F. The addition of chromium and molybdenum in small quantities is why the material can function in the oil and natural gas industries.
Stocking distributor of chromoly aisi 4130 lr/ sr elbow, buy 4130 steel pipe cap with prompt delivery in the entire United Arab Emirates
Know the Delivery strength of your supplier first in the following middle east countries
Lebanon
Oman
United Arab Emirates
Palestine
Syria
Turkey
Egypt
Jordan
Kuwait
Israel
Yemen
Qatar
Iraq
Cyprus
Iraq
Bahrain
Refer to characteristics of 4130 pipe fittings, get 4130 alloy steel unequal cross/ pipe bend with radiography (rt) inspection & burst test report
By adding molybdenum and chromium to its chemical composition, the material exhibits good strength. Reasonable strength aside, UNS G41300 Fittings have good toughness, good fatigue strength, and decent resistance to atmospheric corrosion in moderately high-temperature environments.
The alloy steel is heated at a temperature of 1600°F. After heating these fittings, the alloy will undergo quenching in oil. Forging takes place between 1750°F to 2200°F. The AISI 4130 Elbow can be hot worked at a range of 1500°F to 2000°F. If the alloy is to be formed, it has to be in an annealed condition. The annealing temperature is 1550°F, with subsequent air cooling at 900°F. Tempering the AISI 4130 Seamless Fittings increases its strength. This process takes place between 750°F to 1050°F. It is possible to harden the material with the use of heat treatment.
Cost Of AISI 4130 Fittings
| Description | Per Unit In UAE (Dirham) | Per Unit In USD (Dollar) |
|---|---|---|
| 5 X 3 RED TEE 160 AISI 4130 | 482.58 | 131.36 |
| 3 x 6″ EQ.TEE 160 AISI 4130 | 334.98 | 91.20 |
| 3″ ELBOW 160 AISI 4130 | 175.98 | 47.91 |
| 3 X 2″ RED TEE XXS AISI 4130 | 175.98 | 47.91 |
| 3 Inch EQ.TEE XXS AISI 4130 | 175.98 | 10,829 |
| 3 Inch ELBOWS 90 DEG. LR SCH. XXS | 338.50 | 92.16 |
| 2″ Con Red. SCH. XXS, SMLS, ASME B16.9 | 293.36 | 79.87 |
| 3 X 6 Con Red. SCH 20, SMLS | 244.34 | 66.52 |
Features Of 4130 Pipe Fittings
Industries & Applications
Oil & Gas Industries
Sugar Industries
Food Processing
Gas Processing
Petrochemical
Dimensions Of AISI 4130 Elbow in MM
| Size In mm | A | B | C | Weight in pounds |
| 50.8 | 3.00 | 1.50 | 2.37 | 4.40925 |
| 76.2 | 4.50 | 2.30 | 3.50 | 11.0231 |
| 101.6 | 6.00 | 3.15 | 4.50 | 22.0462 |
| 127 | 7.50 | 4.06 | 5.56 | 39.6832 |
| 152.4 | 9.00 | 4.90 | 6.63 | 66.1387 |
| 139.7 | 7.50 | 3.00 | 5.50 | 48.5017 |
| 171.45 | 9.00 | 5.00 | 6.75 | 68.3433 |
Available grades are listed below
Table of Content