Alloy 20 flanges

Alloy 20 Flanges

What are the Alloy 20 Flanges?

Alloy 20 can be described as an austenitic stainless steel that has less than 50% iron in its chemical composition. The Alloy 20 Flanges are developed to be used in applications that takes place in the sulphuric acid environment. The ASTM B462 Uns N08020 Material also has nickel and chromium in its alloy, which adds to its corrosion resistance properties in a wide range of chemical environments and aggressive media. The alloy of ASTM B462 Flanges is stabilized with niobium so as to reduce intergranular corrosion. The ASTM B462 Alloy 20 Blind Flanges are cost-saving when compared to other flanges made with nickel alloy, and it outperforms different stainless steel grades. The SB 462 Material is fit to be used till a maximum temperature of 1000 degrees F, and it can be formed either by hot-working or cold-working using traditional methods. Due to these properties, the 20cb3 Alloy 20 Slip-on Flanges are widely used in industries like petrochemical, pharmaceutical, marine, chemical processing, and so on.

Verified Supplier

Verified manufacturers and stockists

Alloy 20 Flanges chemical composition and mechanical properties

Alloy 20 Flanges Specification

Alloy 20 Flanges Standard Specification

Alloy 20 Flanges Properties

ASTM B462 Uns N08020 slip on flange suppliers in UAE

What is the maximum pressure rating for Alloy 20 Pipe Flanges?

The maximum pressure rating for Alloy 20 Pipe Flanges is 2500.

SB 462 Uns N08020 reducing flange and carpenter 20 lap joint flange as per ASME B16.5, JIS, ISO 7005, EN 1092-1 etc

How to find out the right ASTM b462 uns n08020 slip on flange dimensions?

To find out the right ASTM B462 Uns N08020 Slip On Flange dimensions, the outer diameter of the pipe or flange where it is to be connected and the inner diameter of the given flange should be checked. They should match to fit perfectly.

View alloy 20 threaded flange and uns n08020 lapped joint flange price list, check SB 462 uns n08020 blind flanges pressure rating and specification

How to determine whether the Carpenter 20 Flange specification is accurate?

MCT test can be conducted on Carpenter 20 Flange. The test report should match the required specification.

Buy factory direct eliminating the costs of SB 462 uns n08020 slip on flange and alloy 20 WNRF flange, check ASTM B462 uns n08020 flanges price per kg in Dubai

How to connect Alloy 20 Forged Flanges to the pipe?

Depending on the type of the Alloy 20 Forged Flanges, they can either be screwed or welded to join with a pipe.

Get direct quotes from verified stockist of 2.4660 alloy 20 forged flanges in UAE, check alloy 20 lap joint flanges price per kg in Bahrain

How to check the test report of the titanium pipe flange?

The MTC and hydro test report of Alloy 2.4660 Flanges contain the following:

  • At the top, you will get information about the manufacturer who manufactured the material.
  • The heat number or lot number is specified in the test. All the material properties including chemical properties, mechanical properties, etc., are linked with the heat number. These properties are known as the technical delivery conditions.
  • The test report also contains the material specification and grade. While reading the reports, these should be matched with the minimum requirements given in material specification for technical and delivery conditions.
  • The MTC should also comply with the delivery conditions, like manufacturing process, type of flange, etc.
  • It also has a material dimension.
  • The mechanical properties will be present in the MTC for each heat number.