
ASTM B211 5754 aluminium alloy rod suppliers in UAE
What is aluminium 5754 round bar?
Aluminium Alloy 5754 Round Bar is a high mechanical strength alloy with exceptional machining. Aluminum 5754 Round Bar is often termed as FMA or free machining alloy and is well utilized in industry. The excellent machining tools and their characteristics enable the production of this complex aluminium 5754 round bar.
Aluminium 5754 round bar chemical composition and mechanical properties



Are you not getting responses to orders with your current suppliers? Get prompt response here for your aluminium alloy 5754 hex bar enquiries in the Middle East
Difference between cold drawn, bright drawn, polished aluminium 5754 grade material
Bright-drawn steel is a black steel that undergoes more processing. The UNS A95754 Round Bar is processed further in cold reduction mills, where the material is cooled (at room temperature), followed by annealing and tempers rolling. This process will produce steel with closer dimensional tolerances and a varied range of surface finishes. The term bright drawn is mistakenly used on all products when the product name refers to rolling flat rolled sheet and coil products.
Check the Rockwell hardness test report and MTC before buying aluminium 5754 h111 square bar
5754 H32 aluminum bar tolerances
- The tolerances of the 5754 Aluminum alloy refer to the varied sizes of the alloy that the manufacturer can produce. The tolerance is higher for the Aluminium 5754 bars thickness profile, ranging from 0.5 to 6mm. For the width ranging from 1000 to 2000mm, the thickness tolerances range between 0.03 to 0.26 mm.
- For the width ranging from 300 to 1650 mm and the thickness of the alloy ranging between 0.2 to 6 mm, the width tolerance is between 0.4 to 5 mm.
- For the thickness of the alloy ranging between 0.2 to 6 mm and length ranging between 1000 to 3000 mm, the length tolerance is between 3 to 10 mm.
- The flatness tolerance for thickness ranges between 0.2 to 6 mm, and the total deviation on length, width, and partial deviation is between 0.4% and 0.5%.
- For the width between 300 to 2000 mm and lateral curvature between 1000 to 3500 mm, the lateral curvature tolerance is between 2mm to 5mm.
- The Squareness Tolerance ranges between 4 to 10 mm for the alloy lengths between 1000 to 5000 mm and width between 1000 to 2000 mm.
Refer aluminium alloy 5754 flat bar as per international standards and customer specifications
What is peeled and reeled UNS A95754 rounds?
The Peeled / Turned Round Bar is peeled or turned for center grinding, rolling, and burnishing purposes. The ASTM B211 Aluminium Alloy 5754 Bars are available in various sizes, shapes, lengths, and dimensions. They have accurate dimensions, a wide range of length tolerances, and improved resistance.
Din 3.3535 aluminium round rod available in a wide range of sizes and specifications.
What is the difference between Al 5754 rod hardening and tempering conditions?
The heat treatments like hardening and tempering of the alloy are usually done outside in “open” furnaces as the outside atmosphere has air or some combustion products. However, a protective environment can also be an excellent choice for heat treatments. It will be in a gaseous atmosphere, molten salt, or vacuum. The critical criteria of the alloy depend on the fact that the surface is free from scale and decarburization. ISO AlMg3 Aluminium 5754 Bars are required. It is known as neutral hardening or clean hardening. Hardening more significant components in lower-grade steels may be possible using non-standard treatments such as faster quench rates or lower-temperature tempers.