API 5L Pipe Bend

API 5L Pipe Bend

What is API 5L pipe bend?

API stands for the American Petroleum Institute. The institute produces several standards such as the 5L for petroleum transportation piping products such as the API 5L Pipe Bend. The material is high carbon steel and the toughness of the material is good for use outdoors. The Carbon Steel API 5L Seamless Bend can withstand scratch and surface wearing and tearing as it has high hardness and strength. The corrosion resistance of the API 5L U Bend is also high compared to ordinary piping materials. This allows the pipe ends of this grade to be used in highly corrosive materials such as petroleum products.

Verified Supplier

Verified manufacturers and stockists

Compare different verified API 5l carbon steel long radius bends suppliers in UAE

What is API 5L psl1 pipe long radius hot bend non-destructive test?

API 5L PSL1 Pipe Long Radius Hot Bend is made with a radius that is 2 times the outer diameter of the pipe. The bend has to undergo testing to determine if all characteristics are present. There are destructive methods that destroy the original piece os metal submitted to the test. The non-destructive testing method of the API 5L Short Radius Bend leaves the bend intact after testing. The hydrostatic test is an example where the pipe should not leak through the body or the seam of the weld.

Find complete information about API 5l psl1 90-degree hot bend non-destructive test, and bending formula of API 5l seamless bend, price per kg

Bending formula of high yield cs API 5L 90 degree bend

High Yield CS API 5L 90 Degree Bend is tested with a bending test. During the test, the weld should not open and no cracks shall occur as well. The bending formula produces the Bend Allowance BA for any given bend such as the API 5L PSL2 J Pipe Bend. The BA = angle × (π/180) × (radius + K-factor × thickness).

Are you looking for manufacturers of API 5l short radius bend in Dubai? You come to the right place, check API 5l mitered pipe bend length calculation & radius chart

How to calculate the length of the API 5L carbon steel welded bend?

API 5L Carbon Steel Welded Bend is made up of carbon steel and can perform well with good hardness, strength, and corrosion resistance. The length of the bend can be calculated through the bend allowance formula. The bend allowance The BA = angle × (π/180) × (radius + K-factor × thickness).

Find here the API 5l line return bends production process, get prime carbon steel API 5l piggable bends with custom thickness from genuine suppliers in the middle east

The production process of API 5l line return bends

API Spec 5L Mandrel Bends are made by sending the cut piece of the same pipe size through the dies. Mandrels are placed inside the pipe to make sure that the internal diameter is kept the same at all times of the forming operation. Smaller-sized bends can be formed under cold conditions whereas larger pipe sizes require hot forming.

There is also the stamping method, the ballooning deformation method, the forging method, and the roll forming applications.

See advantages and uses of API 5l u bend, stocking distributor of high-performance API 5l 45 deg bend as per needs of the client

Carbon steel API 5L piggable bends advantages and uses

Carbon Steel API 5L Piggable Bends are designed to allow the pig to pass through the bends of the pipeline without any trouble. Nowadays, pigs are more important in the industries like the food industry and pharmaceutical industries. Calibrated API 5L Tubing Bends with larger diameters and long welding ends are recommended to be used as piggable bends. These allow for smooth flow of the fluid and pig through the bends.