ASTM A105 Flange

ASTM A105 Flange

Why ASTM A105 flange is a most popular grade among others?

  • ASTM A105 is a widely used material in various applications taking place in different pressure and temperature conditions.
  • A105 flange material is an affordable choice.
  • ASTM A105 flange is readily available in different sizes and types.
  • They also have excellent weldability.
  • The A105 flanges also possess good mechanical properties and hence they are suitable for different industrial applications.

Verified Supplier

Verified manufacturers and stockists

available 9 cars

A105 Blind Flange and SA 105 material suppliers in UAE

ASTM A105 forged steel flanges specification & standards as per ANSI/ASME B16.5, DIN, ISO, JIS etc

ASTM A105 flange specification


ASTM A105 Flange specification

Manufacturing pressure class Sizes A105 nace flange supporting material Certificate & required reports
  • Class 150
  • Class 300
  • Class 400
  • Class 600
  • Class 900
  • Class 1500
  • Class 2500
  • 1/2 to 48″
  • 98″
  • DN10 to DN5000
  • 15 NB to 1200NB
  • Send your specific drawing or sizes to ASTM A105 flange manufacturer and get the best price
You can also buy supporting material from listed A105n steel flanges suppliers in UAE

  • Gaskets (metal/ no metal)
  • Ring Joint
  • Nuts/ Bolts
  • MTC BS EN 10204 3.1
  • MTC BS EN 10204 3.2
  • NACE MR0175/ MR0103
  • Certificates of Raw Material
  • Third Party Inspection Reports
  • 100% Radiography Test Report
  • GS EP PVV 112/ PVV145 / PVV147
Manufacturing methods 9 types of A105 steel flanges installed in high temp CS ASTM A105 Flange connection types Manufacturing equipment & quality tests
  • ASME A105n Forged flanges (Threaded or Screwed)
  • CS ASTM A105 plate flanges (available in various thicknesses)
  • A105n steel casted flanges

Contact now to listed ASTM A105 flanges suppliers for large diameter or custom sizes

  • ASTM A105 blind flange
  • Carbon steel A105 slip on flange
  • ASTM A105 killed carbon steel weld neck flange
  • Killed carbon steel A105 socket weld flange
  • A105 steel lap joint flange
  • Carbon steel ASTM A105 threaded flange
  • A105 forged steel long weld neck flange
  • SA105 steel orifice flange
  • ASTM A105 steel reducing flange (Type 1, 2 & 3)
  • Flat Face (FF) – Most popular
  • Raised Face (RF) – Most popular
  • Small Tongue
  • Large Male-Female (LMF)
  • Tongue & Groove (T&G)
  • Ring Type Joint (RTJ)
  • Small Male-Female (SMF)
  • Groove
  • Lap-Joint Face (LJF)
  • Large Tongue & Groove
  • NDT
  • UI trasonic flaw detector
  • Hydro test
  • Magnetic particle detector
  • NDO
  • Direct-reading Spectrograph
  • Pushing Machine
  • X-ray detector
  • Hydrostatic testing machine
  • Sand-blasting machine
  • Bending machine
  • Electric bevelling machine
  • Press machine

 

Origin of ASTM A105 carbon steel flanges UAE shipping timeline Quick step to get best deal in UAE CS A105 steel flanges EN type
  • Indian
  • European
  • Korean
  • Japan
  • Others you can Inquire with above listed manufacturers
  • UAE suppliers can deliver in 1-3 Days
  • Import – 3-7 Days
  • For urgent requirement check ready stock with above A105 carbon steel flanges suppliers
At pipingmaterial.ae all manufacturers and suppliers are verified, so now you can contact all on a single platform and get the best price

  • Contact ASTM A105 flange manufacturer via email/ whatsapp/ call
  • Send your drawing and sizes
  • Get the quick quote from all top 10 suppliers

 

  • EN-TYPE 05 (UNS K03504 ASTM A105 blind)
  • EN-TYPE 11 (A105 weld neck)
  • EN-TYPE 02/04 (ASTM A105 lap joint)
  • EN-TYPE 01/12 (A105 steel slip on)
  • EN-TYPE 13 (CS A105 threaded)
  • EN-TYPE 14 (ASTM A105 Grade socket weld)
  • EN-TYPE 32/34 (A105n steel welding collars)
  • EN-TYPE 21 (ASTM A105 nace long weld neck)
American Standard of ASTM A105 CS flange Grade A105 forging DIN/ European standard ASME SA105 pipe flange JIS standard ASTM A105 flange equivalent standard
  • API 6A
  • ASME B16.5
  • MSS SP-44
  • ASME B16.47
  • ASME B16.48
  • ASME B16.36
  • DIN EN 1092-1
  • PN6
  • PN10
  • PN16
  • PN25
  • PN40
  • PN64
  • 5K
  • 10K
  • 16K
  • 20K
  • 30K
  • 40K
  • 63K
  • Equivalent Indian standard : IS 2062 grade B
  • Equivalent en standard: EN 1092-1
  • Equivalent din standard: DIN 17100
  • ASTM A105 casting equivalent : ASTM A216/ A352
DIN number of ASTM A105/ A105n flange material Other special design A105 carbon steel pipe flange Other CS A105 flange International Standard
  • DIN 2631/ 2633/ 2632 / 2635/ 2634 (ASME SA105 Welding Neck flange)
  • DIN 2527 (ASTM/ ASME A105n steel blind)
  • DIN 2566 (CS ASTM A105 threaded flange)
  • DIN 2641/ 2655/ 2642/ 2656 (CS ASTM A105 lap joint flange)
  • DIN 2573/ 2576 (A105 nace flat flange)
  • DIN 2673 (ASME SA105 Lap Joint Short Stub End)
  • ASME A105n orifice flange
  • SA105 steel swivel flange
  • Killed carbon steel ASTM A105 spades
  • ASTM A105 piping spacers or spacer ring
  • BS4504
  • BS 10
  • DIN
  • ANSI
  • GOST 12820
  • ISO 7005
  • UNI 2276
  • ASME
  • VSM
  • SABS 1123
  • JIS
  • EN
  • KS B1503
  • NFE 29203
  • GB
  • AWWA C207
  • PSI
  • AS2129

Check A105 steel flanges dimensions, equivalent and price per kg in Dubai

A105 flange price list

Type Price
Flange, SLIP-ON, 6 IN, CL150 RF, ASTM A105 AED 35.73
Flange, slip on flat face, forged carbon steel, ASTM A105, JIS STD 10K, SIZE: 26″ AED 1116.45
12 ” SORF Flange  ANSI Std , #900 LBS , ASTM A105 carbon steel AED 669.87
10″ Flange, SORF, CS, ASTM A105, ASME B16.5 CL150 AED 267.95
Blind flange 12″ 900LB RF RTJ CS ASTM A105/ A105N AED 982.48
Flange, Blind, Carbon Steel, ASTM A105, 12 Inch, Hot Dip Galvanized, 12″ AED 1027.13
2″ Blind flange , ANSI Std , #900 LBS ,Grade A105 AED 111.65
8″ Blind Flange RTJ, CLASS 2500#, ASTM A105, ASME B16.5 AED 401.92
WN Flange RTJ, CLASS 2500#, SCH xxs, ASTM A105, ASME B16.5, 8″ AED 803.62
Flange WN 150 SCH 20 RF CS A105 ANSI B16.47 SERIES A, 8″ AED 267.87
Flange WN 150 SCH 20 RF CS ASTM A105 steel, ANSI B16.5, 12″ AED 401.81
ASTM A105 14″x 9.53mm thick ANSI 300# WNRF Flanges (Sch std) AED 535.75
6″ Forged Steel Weldneck Flange SCH 160, ASTM A105 class 900 AED 491.10
1-1/8″ WN Flange RTJ, API 5000#, SCH XXS, ASTM A105, ASME B16.5 AED 35.72
6″ WN Flange RTJ, CLASS 2500#, SCH 160, ASTM A105, ASME B16.5 AED 669.68
 6″ WN Flange RTJ, CLASS 2500#, SCH XXS, ASTM A105, ASME B16.5 AED 669.68
 8″ WN Flange RTJ, CLASS 2500#, SCH XXS, ASTM A105, ASME B16.5 AED 803.62
Reducing Flange ASTM A105 GALV-CL 150, RF SMOOTH F SW ASME B16.5 4 X 3/4″ AED 156.26
Direct buy from leading A105 Flange manufacturers and save your cost of A105n Material and A105 Forging

Types of ASTM A105 steel flanges

Carbon steel ASTM A105 weld neck flange

Carbon steel ASTM A105 weld neck flange

A105 steel threaded flange

A105 steel threaded flange

CS ASTM A105 Blind Flange

CS ASTM A105 Blind Flange

Carbon steel ASTM A105 spectacle flange

Carbon steel ASTM A105 spectacle flange

ASTM A105 steel long weld neck flange

ASTM A105 steel long weld neck flange

ASTM A105N Normalized Flange

ASTM A105N Normalized Flange

ASTM A105 SORF Flange

ASTM A105 SORF Flange

ASTM A105 Slip On Flange

ASTM A105 Slip On Flange

Large diameter A105 carbon steel flanges

Large diameter A105 carbon steel flanges

Killed carbon steel A105 flange chemical composition

Element Composition, %
Manganese 0.60-1.05
Silicon 0.10-0.35
(Maximum)
Carbon 0.35
Nickel 0.40
Vanadium 0.08
Phosphorus 0.035
Sulfur 0.040
Copper 0.40
Molybdenum 0.12
Chromium 0.30

A105 steel flange mechanical properties

Tensile strength, min 70000 psi [485 MPa]
Yield strength,min 36000 psi [250 MPa]
Reduction of area, min, % 30
Elongation, min, % 30
Hardness, max 187 HB

Carbon steel ASTM A105 flange density kg/m3

  • 7800 – 8000 kg/m3
  • 0.285 lb/in3 or 7.9 g/cm3

A105 forged steel flange yield strength

  • 36 ksi (250 MPa) min

SA105 steel equivalent flange

  • ASME SA-181 (ASTM A181) Class 70

ASTM A105 steel flange tensile strength

  • 70 ksi (485 MPa) min
SA 105 Flange in smooth, mill or rolled, serrated, machined finish in various types including Blind, Slip on, Socket weld, threaded and forged

CS ASTM A105 flange supply condition

  • Annealed
  • Normalized
  • Quenched and Tempered
  • Normalized and Tempered

ASTM A105 killed carbon steel flange weight chart

Class 150
Nominal Pipe Size (NPS) CS ASTM A105 Slip On flange SA105 steel Blind flange CS A105 Weld Neck flange
½ 1 2 2
¾ 2 2 2
1 2 2 3
3 3 3
3 4 4
2 5 5 6
8 7 10
3 9 9 11.5
11 13 12
4 13 17 16.5
5 15 20 21
6 19 27 26
8 30 47 42
10 43 70 54
12 64 123 88
14 90 140 114
16 106 180 140
18 130 220 165
20 165 285 197
22 185 355 225
24 220 430 268
Class 300
Nominal Pipe Size (NPS) CS ASTM A105 Slip On flange SA105 steel Blind flange CS A105 Weld Neck flange
½ 2 2 2
¾ 3 3 3
1 3 4 4
4.5 6 5
6.5 7 7
2 7 8 9
10 12 12
3 13 16 18
17 21 20
4 23.5 28 26.5
5 29 37 36
6 39 50 45
8 58 81 69
10 81 124 100
12 115 185 142
14 165 250 206
16 210 315 250
18 253 414 320
20 315 515 400
22 370 640 465
24 490 800 580
Class 400
Nominal Pipe Size (NPS) CS ASTM A105 Slip On flange SA105 steel Blind flange CS A105 Weld Neck flange
½ 2 2 3
¾ 3 3 3.5
1 3.5 4 4
4.5 6 4.5
6.5 8 8
2 8 10 10
12 15 14
3 15 20 18
21 29 26
4 26 33 35
5 31 44 43
6 44 61 57
8 67 100 89
10 91 155 125
12 130 226 175
14 191 310 233
16 253 398 295
18 310 502 360
20 378 621 445
22 405 720 505
24 539 936 640
Class 600
Nominal Pipe Size (NPS) CS ASTM A105 Slip On flange SA105 steel Blind flange CS A105 Weld Neck flange
½ 2 3 3
¾ 3 4 4
1 4 4 4
5 6 6
7 8 8
2 9 10 12
13 15 18
3 16 20 23
21 29 26
4 37 41 42
5 63 68 68
6 80 86 81
8 115 140 120
10 177 231 190
12 215 295 226
14 259 378 347
16 366 527 481
18 476 665 555
20 612 855 690
22 590 1000 720
24 876 1250 977
Class 900
Nominal Pipe Size (NPS) CS ASTM A105 Slip On flange SA105 steel Blind flange CS A105 Weld Neck flange
½ 6 4 7
¾ 6 6 7
1 7.5 9 8.5
10 10 10
14 14 14
2 22 25 24
31 32 31
3 36 35 36
4 53 54 53
5 83 87 86
6 110 115 110
8 172 200 187
10 245 290 268
12 326 415 372
14 400 520 562
16 459 619 685
18 647 880 924
20 792 1107 1164
24 1480 2099 2107
Class 1500
Nominal Pipe Size (NPS) CS ASTM A105 Slip On flange SA105 steel Blind flange CS A105 Weld Neck flange
½ 6 4 7
¾ 6 6 7
1 8 9 9
10 10 10
14 14 14
2 25 25 25
36 35 36
3 48 48 48
4 73 73 73
5 132 140 132
6 165 160 165
8 260 302 275
10 436 510 455
12 667 775 690
14 940 975 940
16 1250 1300 1250
18 1625 1750 1625
20 2050 2225 2050
24 2825 3625 3325
Class 2500
Nominal Pipe Size (NPS) CS ASTM A105 Slip On flange SA105 steel Blind flange CS A105 Weld Neck flange
½ …. 7 8
¾ …. 10 9
1 …. 12 13
…. 18 20
…. 25 28
2 …. 39 42
…. 56 52
3 …. 86 94
4 …. 133 146
5 …. 223 244
6 …. 345 378
8 …. 533 576
10 …. 1025 1068
12 …. 1464 1608

Temperature limit for ASTM A105 carbon steel flange

A105/ A105N flange Temperature limit
Section I 1000°F
Section III, Classes 2 and 3 700°F
Section VIII Division 1 1000°F
Section XII 650°F

ASME B16.5 A105 flange temperature rating

Class 150# 300# 400# 600# 900# 1500# 2500#
TEST PRESSURE 425 1100 1450 2175 3250 5400 9000
-20 – 100F temperature 275 720 960 1440 2160 3600 6000
150F 255 710 945 1420 2130 3550 5915
200F 240 700 930 1400 2100 3500 5830
250F 225 690 920 1380 2070 3450 5750
300F 210 680 910 1365 2050 3415 5690
350F 195 675 900 1350 2025 3375 5625
400F 180 665 890 1330 2000 3330 5550
450F 165 650 870 1305 1955 3255 5430
500F 150 625 835 1250 1875 3125 5210
550F 140 590 790 1160 1775 2955 4925
600F 130 555 740 1110 1660 2770 4620
650F 120 515 690 1030 1550 2560 4300
700F 110 470 535 940 1410 2350 3920
750F 100 425 575 850 1275 2125 3550
800F 92 365 490 730 1100 1830 3050
850F 82 300 400 600 900 1500 2500
900F 70 225 295 445 670 1115 1855
950F 55 155 205 310 465 770 1285
1000F 40 85 115 170 255 430 715

A105 steel ASME B16.47 Class A flanges temperature rating

As per MSS SP-44 ANSI B16.47 CL A

Class 150# 300# 400# 600# 900# 1500#
TEST PRESSURE 425 1100 1450 2175 3250 5400
-20 – 100F 285 740 990 1480 2220
300F 275 715 955 1430 2145
350F 265 690 925 1380 2070
400F 255 665 890 1330 2000
450F 245 640 860 1285 1925

ASTM A105 ASME B16.47 Class B flanges temperature rating

As per API 605 ANSI B16.47 CL B

Class 75# 150# 300# 400# 600# 900# 1500#
TEST PRESSURE 425 1100 1450 2175 3250 5400
100F 140 285 740 990 1480 2220
200F 130 260 675 900 1350 2025
300F 115 230 665 875 1315 1970
400F 100 200 635 845 1270 1900
500F 85 170 600 800 1200 1795
600F 70 140 550 730 1095 1640
650F 60 125 535 715 1075 1610
700F 110 535 710 1065 1600
750F 95 505 670 1010 1510
800F 80 410 550 825 1235
850F 65 270 355 535 805
900F 50 170 230 345 515
950F 35 105 140 205 310
1000F 20 50 70 105 155

Marking examples of A105 carbon steel slip on flange & blind flange

  • ASTM A105 4 1/2” SO CLASS 150 RF manufacturer / supplier name & logo
  • ASTM A105 4 1/2” Blind CLASS 300 RF manufacturer / supplier name & logo

CS A105 flanges p number

  • P-number of 1 and Group number of 2
ASTM A105 Carbon Steel Pipe Flanges Application

Calculate A105 blind flange thickness for hydrostatic testing

  •  t = d *(CP/SE+1.9W hg/SE*d^3) ½

Where,

  • d= A105 flange diameter or short span
  • E= Joint efficiency
  • S= Maximum allowable stress value
  • W= Total bolt load
  • hg= Gasket moment arm
  • P = Design pressure
  • C = 0.3 From Fig UG-34(j)

So, here are few results using above formula

  • 32″ SA105 blind flange thickness: 42.48 mm
  • 36″ Killed carbon steel A105 forged flange thickness: 47.41 mm
  • 38″ Carbon steel A105 Blank Flange thickness: 50.31 mm
  • 44″ SA105n Blind Plate thickness: 54.19 mm
  • 46 A105 forged steel blind flange thickness: 57 mm
  • 48 CS ASTM A105 blind thickness: 59 mm

UNS K03504 ASTM A105 flange dimensions

ASTM A105 150 Flange Dimensions

ASTM A105 150 Flange Dimensions

Maximum size limit and weight of ASME A105n flanges

  • Maximum size: 98 inches or contact manufacturer
  • Maximum weight limit of A105 forged steel flange is 4540 Kg
  • For larger sizes choose ASTM A266 specification, you can contact listed A105 flange manufacturer for estimated delivery and flange A105n price

Raised face height of ASTM A105 weld neck flange

  • Up to class 400: standard height is 1/16″
  • Class 400 & above : height is 1/4″

Requirement of A105 nace flange testing

  • Tension tests
  • Hardness tests
  • Hydrostatic tests (as per S57 in A961/A961M)
  • Macroetch test
  • Magnetic particle examination
  • For surface – Liquid penetrant examination

A105n carbon steel flange heat treatment

  • It should be done between 137 to 187HB Hardenss

Carbon steel A105 flange pressure rating

ASME B16.34 (A105/ A105N) ANSI PRESSURE RATING CHART
Temperature ( C°) Class 150 Class 300 Class 400 Class 600 Class 900 Class 1500 Class 2500
-29 / 38 19.6 51.1 68.1 102.1 153.2 255.3 425.5
50 19.2 50.1 66.8 100.2 150.4 250.6 417.7
100 17.7 46.6 62.1 93.2 139.8 233 388.3
150 15.8 45.1 60.1 90.2 135.2 225.4 375.6
200 13.8 43.8 58.4 87.6 131.4 219 365
250 12.1 41.9 55.9 83.9 125.8 209.7 349.5
300 10.2 39.8 53.1 79.6 119.5 199.1 331.8
325 9.3 38.7 51.6 77.4 116.1 193.6 322.6
350 8.4 37.6 50.1 75.1 112.7 187.8 313
375 7.4 36.4 48.5 72.7 109.1 181.8 303.1
400 6.5 34.7 46.3 69.4 104.2 173.6 289.3
425 5.5 28.8 38.4 57.5 86.3 143.8 239.7
450 4.6 23 30.7 46 69 115 191.7
475 3.7 17.4 23.2 34.9 52.3 87.2 145.3
500 2.8 11.8 15.7 23.5 35.3 58.8 97.9

Supply locations in Middle East

Supply Graph Of ASTM A105 Flange In Middle East

Advantages of astm a105 galvanized flange. Under which condition engineers use it?

  • Galvanizing provides an additional layer of protection which enhances the corrosion resistance properties of the  A105 carbon steel flange.
  • The coating helps prolong the lifespan of the flange by preventing rust and deterioration.
  • ASTM A105N and A105 galvanized flange are a cost-effective solution for applications where corrosion resistance is essential.

Engineers use ASTM A105 forged steel flange in conditions where they will be exposed to moisture, chemicals or other corrosive elements. Thus, they are mostly found in outdoor environments, marine applications and industrial settings.

What is the maximum size and pressure class of the SA 105 flange? Up to what temperature it can sustain?

The maximum size and pressure class of CS ASTM A105 blrf flange depend on the standards & specifications used for their design and manufacturing. Generally, they are available in sizes ranging from 1/2 to 48″ or larger. The pressure class can vary from 150 to 2500 or even higher and it depends on the design requirements.

SA 105 flange is used in temperatures ranging from -29°C to 538°C. The exact temperature depends on the specific pressure class and material properties

What is heat treatment? Heat treatment advantages of ASTM A105 carbon steel flange

Heat treatment is a controlled process used to alter the physical and mechanical properties of the material. The process involves heating the material to a specific temperature, holding it at that temperature for a certain duration and then cooling it at a controlled rate.

The advantages of heat treatment for forged A105 lap joint flange are:

  • It can improve the ASTM A105 grade flange’s tensile strength and hardness.
  • Improve the toughness and impact resistance of ASTM A105N flange.
  • Enhance the wear resistance and lifespan of ASTM A105 steel flange along with reducing maintenance requirements.
  • Heat treatment can relieve internal stresses in carbon steel ASTM A105 pipe flange.
  • The process can improve the machinability.
  • It refines the grain structure of the material
  • It allows for precise control over the material properties.

What are ASTM A105N normalized flanges? In which conditions should you install them?

A105N normalized flange is A105 CS flange that have undergone the normalization heat treatment process. Herein, the flanges are heated to a specific temperature above their critical range and then air cooled to room temperature.

The normalized ASTM A105n carbon steel flange can be installed in the following conditions:

  • High pressure and temperature systems
  • Critical service applications
  • Structural components with enhanced mechanical properties
  • Petrochemical and refinery industries

Is there any cost and temperature rating difference between SA 105 flange and ASTM A105N flange?

A105N normalized flange may be slightly more expensive than standard flanges A105. The additional cost is due to the normalization heat treatment process, which enhances the mechanical properties.

A105N flange have a higher temperature rating than ASTM A105 forged steel flange

Experts advice to make Cost-effective ASTM A105 flange material

  • Buy ASTM A105 sorf flange materials in bulk to get volume discounts from suppliers.
  • Optimize the supply chain to reduce transportation and inventory costs.
  • Promote standardization of CS ASTM A105 rf blind flange sizes and specifications to simplify production.
  • Implement lean manufacturing principles to eliminate non value-added processes and increase productivity.
  • Invest in automation and modern technologies to enhance production efficiency and reduce labor costs.
  • Encourage a culture of continuous improvement to identify and implement cost-saving opportunities.

Which formula is best to calculate A105 flange weight chart?

The weight of ASTM A105 weld flange can be calculated by using the below formula:

Weight (W) = (OD – Thickness) x Thickness x 0.02466

Which origin is best to import A105 Flange in UAE?

The choice of the best origin to import flange wn A105 into the UAE depends on several factors. This will include quality, cost, lead time and supplier reliability. Some of the common origins to consider are:

  • Indian manufacturers are known for producing high quality carbon steel ASTM A105 flange at competitive prices.
  • China is a major exporter of SA105 steel flange and offers a vast selection of options at various price points.
  • South Korean manufacturers adhere to quality and have advanced manufacturing capabilities.
  • Some European countries produces premium quality ASTM A105 UNS K03504 flange, although they may be relatively more expensive.

Which quality testing and reports you should ask from your A105 flange manufacturer?

  • Dimensional Inspection to verify the flange dimensions is as per the specified tolerances.
  • Material testing certificates provide details about the chemical composition and mechanical properties.
  • Pressure testing verify the flange ability to withstand the specified pressure ratings without leakage or failure.
  • Non-destructive testing detects any surface or internal defects of ASTM A105 UNS K03504 forging.
  • Certification and compliance ensure that the CS ASTM A105 flange is certified to relevant international standards.
  • Request traceability information to identify the batch number of the A105 nace flange.