ASTM a178 boiler tube

ASTM A178 Boiler Tube

What is astm a178 boiler tube?

ERW tubes with a minimal wall width are covered by ASTM A178 standard. Boiler tubing, boiler ventilation systems, superheater vents, and safety terminals all employ ASTM A178 Boiler Tube, which is made of carbon steel & carbon-manganese alloy steel. Heat treatment & welding upon cooling are required steps in the production process.
The ASME SA178 Tubing sizes and wall thicknesses supplied following this specification range from 0.035 to 0.320 inches (0.9 to 9.1 millimeters), inclusive, in minimal wall width. Other-sized pipes are acceptable as long as they meet all other specifications of this specification. ASME SA178 Carbon Steel Tubes with an internal diameter and thickness of less than 1/8 inches [3.2 mm] or 0.015 inches. [0.4 mm] is example from the specifications for mechanical characteristics.

Verified Supplier

Verified Stockists (Contact directly for instant quote)

ASTM A178 equivalent, chemical composition, grade and specification

ASTM A178 Boiler Tube Specification

ASTM A178 Boiler Tube Properties

Find affordable suppliers of ASME sa178 erw steel tubing in UAE with excellent quality. Check a178 tubing various grades

What are grades of ASME sa178 tubing

ASTM A178 carbon steel tubing is offered in three grades: SA 178 Gr A Boiler Tube, SA 178 Gr C Boiler Tube, & SA 178 Grade D Boiler Tube. Low-carbon steel alloy is used to produce the SA 178 Gr A tubes. Despite being flexible, this SA178a Pipe Material with low carbon content is machinable, weldable, and noted for its exceptional ductility and hardness capabilities.
Regarding mechanical qualities, both grade D boiler pipes & SA178 gr C boiler tubes of SA178D boiler tubing must meet the specifications. mechanical properties including such tensile properties, yield strength, and extension properties are what these characteristics are.

Are you looking for stockists and importers who provide cut-to-size sa178 carbon steel tubes in the Middle East in accordance with global standards? and see the physical properties

What are the physical properties of ASME SA178 carbon steel tubes?

The physical characteristics of these tubes are well recognized. Tensile strength for SA 178 carbon manganese ERW tubing ranges from 47 ksi (325 MPa) to 70 ksi (485 MPa). The yield strength of ASME SA178 Welded Steel Boiler Tube is between 26 ksi (180 MPa) and 40 ksi (275 MPa).
These pipes have elongation percentages between 30 and 35%. These characteristics vary for various SA 178 tube grades. The main features that have elevated it to the top spot in the industry are superior electric resistance and strong corrosion protection. These pipes range from 77 to 79 HRB in hardness.

Chat with numerous trustworthy stocking distributors who maintain stock of Jindal, Tenaris made ASTM a178 welded steel boiler tubes and look at ASTM a178 tubing welding capability

Does have astm a178 tubing welding capability?

The good weldability of ASTM A178 Steam Boiler Pipes results from the alloy’s low amount of carbon.
Excellent weldability can be found in ASTM A178 Boiler Pipes (Low-carbon alloy), which contain 0.15 to 0.3% C and up to 0.9% Mn. The best ones have less than 0.2 percent carbon. These alloys usually cause issues while welding if the contaminants are kept to a minimum. In some situations, steels having a carbon content of over 0.25% are vulnerable to cracking.
Typically, such pipes are constructed using electric resistance welding. The most critical technical purposes and specific uses in the heating equipment use boiler pipes that are welded following ASTM A178.

Get here the top 10 traders of ASTM a178 steam boiler pipes on Schedule 40, 80, etc. You’ve come to the correct place; and look over how you enhance the properties

How do you enhance the properties of astm a178 carbon steel tubing

After production, ASTM A178 ERW Boiler Tubes go through several stages. To improve their qualities, these procedures go through surface finishing and heating. Their ability to survive hostile environments and prevent corrosion is increased by surface treatments.
ASTM A178 ERW Steel Tube is given a heat treatment to increase its flexibility, hardness, endurance, toughness, and strength properties and to relieve any internal pressure built up in the metal. Whether in static motion or turbulent flow, the rate of corrosion grew with increasing surface irregularities. Cleansing & surface stimulation are frequently required for metal surface treatment.

Obtain suppliers of ASME sa178 erw boiler tubes in all standard and unusual diameters, and see how to determine whether your manufacturer or supplier is real.

How to determine whether your manufacturer or supplier is real?

On the company’s website, search for certain items that might reveal whether it is a real business.

  • Look for a phone number & company address.
    Every webpage should feature a telephone and a business location so visitors can reach the company.
  • Look for a user agreement
    On the website, users should also search for a user agreement and company profile. These documents may contain information about the company’s history, ethics, vision, and mission.
  • Look for a business number.
    This might be stated in the terms & conditions or privacy policy of a business.