ASTM A182 F44 round bar

ASTM A182 F44 Round Bar

Stainless steel of grade 44 is covered by the forging material specification ASTM A182 F44 round bar, which is used to create bare forgings or forged and machined products for high-temperature service applications. In accordance with ASTM A182 grade F44 specification, these are available in forged flanges, fittings, valve bodies, fasteners, plates, bars, rings, and similar pressure components. For 44 stainless steel forgings and forged products, the ASTM A182 specification provides specifications for things like chemical composition, mechanical qualities, heat treatment, and other supplemental requirements.

Verified Supplier

ASTM A479 UNS S31254 cold drawn bar and A182 gr F44 hex bar suppliers in UAE

ASTM A182 F44 round bar specification


ASTM A182 f44 round bar specification

A182 F44 round bar diameter A182 f44 duplex hex bar size range ASTM A276 UNS S31254 flat bar size
  • 3mm – 800mm

Buy F44 duplex rod stock in Saudi Arabia, top 10 verified stockists and suppliers, get estimate now!

  • 2mm – 100mm A/F
  • Thickness: 2mm -100mm
  • Width: 10 to 500mm
UNS S31254 F44 square bar sizes A182 gr F44 cold drawn bar length ASTM A182 F44 6mo rounds surface finish
  • 4mm – 100mm
  • above 50 feet

Looking for cut to size A276 S31254 F44 bar material? Call directly to verified ASTM A182 F44 round bar suppliers in UAE

  • 6 RA
  • 32 RA
  • 63 RA
A182 F44 duplex annealed bar precision straightness UNS S31254 F44
bar stock uses & applications
Meet Standard
  • 0.0015 inch TIR/FT
  • 0.006 inch TIR/FT
  • Oil & Gas
  • Shipbuilding
  • Machined equipments
  • Construction
  • Desalination plants
  • Propeller shafts
  • Pump parts
  • Fasteners
  • Bearing
  • Marine
  • Piston rods
  • Rotational applications
  • ASTM A923 test
  • NACE MRO175
  • API
  • ASTM A182 UNS S31254
  • ISO 15156
  • ASTM A479
  • ASTM A276 S31254 Condition A
Temperature limit ASTM A182 F44 forged bar common forms F44 duplex steel polishes bar european standard
  • 1800 – 2100°F
  • F44 duplex steel hexagonal bar
  • A182 F44 rectangular bar
  • F44 duplex square bar
  • SA182 F44 flat bar
  • EN 10272
  • EN 10088-3
  • BS EN 10088-3
Types of ASTM A276 UNS S31254 bar stock Value added services A182 F44 duplex bright bar quality test & MTC
  • F44 duplex steel boat shaft
  • ASTM A182 F44 cold finished bar
  • A182 F44 machined bar
  • F44 duplex blooms
  • SA182 F44 G&P
  • Precision ASTM A182 F44 6mo polished rod
  • A182 F44 duplex forged bar
  • ASTM A182 grade F44 TGP bar (Turned, ground & polished)
  • UNS S31254 F44 billets
  • A276 S31254 F44 pump shaft (PSQ)
  • F44 duplex stainless steel solution-annealed bar
  • ASTM A479 UNS S31254 bearing shaft (BSQ)
  • F44 duplex steel polished bar
  • ASTM A182 F44 precision ground bar
  • Centerless Turning
  • Pre-Straightening
  • Heat Treating
  • Chrome Plating
  • End Conditioning
  • Press Straightening
  • Press Straightening
  • Rotary Straightening
  • Custom Packaging
  • Saw Cutting
  • CNC Machining
  • Centerless Grinding
  • Mechanical Testing
  • Non Destructive Testing
  • PMI
  • 3.1 certification
  • Failure Analysis
  • Mettalographic Testing
UNS S31254 F44 precision ground bar tolerance Machined A276 S31254 F44 bar stock tolerance F44 duplex bar delivery condition
  • +/-0.5mm
  • h6 Tolerance
  • Slit rolled edge
  • Centreless ground
  • A182 gr F44 bright bar
  • Polished SA182 F44 bar
  • Grinding
  • Rough turned
  • precision ground
  • Hot rolled
  • Peeled
  • Smooth turned
  • ASTM A479 UNS S31254 black bar
  • Hot rolled annealed
  • Cold drawn
  • Bright drawn
ASTM A182 F44 forged bar ISO tolerances F44 duplex stainless steel hot rolled bar
ISO 286 tight tolerances
ASTM A479 UNS S31254 polished bar manufacturing technique
  • H6
  • H7
  • H8
  • H9
  • H10
  • H11
  • G5
  • G6
  • D8
  • D9
  • Hot Rolled
  • Cold Drawn
  • Forged

F44 duplex steel cold-drawn round bar stock

Length Tolerance Diameter Chamfering
  • 78.7401 – 275.5905 in
  • ASTM A484
  • as specified
  • 1/8″ – 1-3/16″
  • 0.3748 in & above

A182 F44 centerless grinding bar stock

Diameter Chamfering Length Tolerance
  • 0.2362 to 1.0000 in
  • 0.3748 in
  • 78.7401 to 275.5905″
  • ASTM A484
  • as per customer requirement

F44 duplex cold-drawn square bar stock

Diameter Tolerance Length
  • 3/16″ to 1″
  • ASTM A484
  • 78.7401 – 275.5905 in

A182 gr F44 cold-drawn hex bar stock

Diameter Length Tolerance
  • 0.1968 to 0.9842 in
  • 78.7401 – 275.5905
  • ASTM A484

F44 duplex steel bright bar surface

No.6 Mirror Finish Black Matt
No.8 Grounded Hairline
Bright Polished

Types of A182 F44 duplex bar

ASTM A182 F44 rolled bars

ASTM A182 F44 rolled bars

ASTM A182 F44 stainless steel black bars

ASTM A182 F44 stainless steel black bars

ASTM A182 gr F44 grinded machined bars

ASTM A182 gr F44 grinded machined bars

ASTM A182 F44 hex bar

ASTM A182 F44 hex bar

SA 182 F44 flat bar

SA 182 F44 flat bar

SA182 gr F44 square bar

SA182 gr F44 square bar

A182 F44 duplex hardened & tempered bars

A182 F44 duplex hardened & tempered bars

SA 182 F44 duplex steel continuous cast bars

SA 182 F44 duplex steel continuous cast bars

ASTM A182 UNS S31254 bright bars

ASTM A182 UNS S31254 bright bars

ASTM A276 UNS S31254 rectangular bar

ASTM A276 UNS S31254 rectangular bar

ASTM A479 UNS S31254 bright bar

ASTM A479 UNS S31254 bright bar

A276 S31254 normalized bars

A276 S31254 normalized bars

A479 S31254 hot rolled bars

A479 S31254 hot rolled bars

ASTM A479 S31254 cold finished round bar

ASTM A479 S31254 cold finished round bar

ASTM A276 S31254 annealed bar

ASTM A276 S31254 annealed bar

A276 UNS S31254 forged bars

A276 UNS S31254 forged bars

A479 UNS S31254 annealed bars

A479 UNS S31254 annealed bars

SA182 F44 polished bar

SA182 F44 polished bar

ASTM A182 grade F44 cold drawn bar

ASTM A182 grade F44 cold drawn bar

UNS S31254 F44 bright drawn round bar

UNS S31254 F44 bright drawn round bar

F44 duplex stainless steel machined bars

F44 duplex stainless steel machined bars

  • ASTM A479 UNS S31254 round bar
  • F44 duplex stainless steel hex bar
  • A276 S31254 F44 square bar
  • UNS S31254 F44 flat bar
  • ASTM A182 grade F44 rolled bars
  • Cold rolled A182 F44 duplex black bars
  • ASTM A276 UNS S31254 grinded machined bars
  • SA182 F44 hardened & tempered bars
  • A182 gr F44 continuous cast bars
  • F44 duplex bright bars
  • A182 F44 normalized/ peeled bars
  • Hot rolled F44 duplex steel forged bars
  • ASTM A182 F44 annealed bars

ASTM A182 f44 equivalent

Standard A182 F44
WNR 1.4547
UNS S31254
SIS 2378
AFFNOR S31254

UNS S31254 F44 bright bar tolerances

Check A276 S31254 F44 rod metric diameter tolerances

Dia – mm 1 < 3 250 < 275 50 < 80 6 < 10 10 < 18 3 < 6 180 < 250 30 < 50 18 < 30 120 < 180 80 < 120
ISO h6 0.006 0.019 0.009 0.011 0.008 0.016 0.013 0.022
ISO h7 0.010 0.030 0.015 0.018 0.012 0.025 0.021 0.035
ISO h8 0.014 0.081 0.046 0.022 0.027 0.018 0.072 0.039 0.033 0.063 0.054
ISO h9 0.025 0.130 0.074 0.036 0.043 0.030 0.115 0.062 0.052 0.100 0.087
ISO h10 0.040 0.210 0.120 0.058 0.070 0.048 0.185 0.100 0.084 0.160 0.140
ISO h11 0.060 0.320 0.190 0.090 0.110 0.075 0.290 0.160 0.130 0.250 0.220

Physical properties of ASTM A182 F44 6mo bar

Grade Density Modulus of Elasticity Melting point Thermal conductivity
A182 f44 duplex 8 g/cm3 23.0 °C. 77 GPa 1230 °C 20°C. 14. W.m-1.K-1

F44 duplex stainless steel rod mechanical properties

Alloy Tensile Strength Yield Strength 0.2% Proof Elongation Hardness
f44 duplex steel 94 (ksi) min 43 (ksi) min 35 (% in 50mm) min

ASTM A479 UNS S31254 polished bar chemical composition

Standard C P MN S MN MN CR NI MO NI CU
ASTM A182 f44 .02 .03 Max 1. Max .01 Max 1. Max 1. Max 19.5 – 20.5 17.5 – 18.5 6 – 6.5 17.5 – 18.5 .5 – 1.

ASTM A182 f44 round bar properties

A479 UNS S31254 flat bar in peeled / turned condition, view F44 duplex square bar price in Dubai

The metal has 94 KSI tensile strength and yield strength of 43 ksi. An ASTM A182 Gr F44 Flat Bar is quite challenging for the machine. It has an extremely high work hardening rate. This metal has less sulfur content in it. It can be used in sharp tools.

An A182 Gr F44 Bar is used for forging. It is a specification for 44-grade stainless steel. It is used for making raw forgings or forged and machine thighs. It is used there is high-temperature service. It has 13 % wt. Chromium. It is good martensitic steel.

Learn about the ASTM A276 UNS S31254 bright bar in detail, including its uses, sizes, and weight chart

Its specification is used for chemical composition and mechanical properties. ASTM A182 Grade F44 Rounds are also used for heat treatment and additional requirements. It is a forging material for 44-grade stainless steel. An ASTM A182 F44 Hex Bar is designed in a polygonal cross-section. It has 6 sides.

ASTM A182 UNS S31254 Bar is used for manufacturing raw forgings or forged and machined goods. It is used where there is a high temperature. It has 13 % chromium or 410 alloy steel. It is a highly corrosion-resistant austenitic stainless steel. It has a very high nickel and high chromium content.

Before you buy A479 S31254 rectangular bar and F44 duplex steel cold finished round bar in the Middle East Countries and check the manufacturing origin

The bars have exceptional properties, which makes them different from others. An ASTM A182 Round Bar is tough to machine because of its high working hardening rate. It should have good-quality raw materials. A SA 182 F44 Duplex Steel Bar has high molybdenum and nitrogen content. They are cheaper and highly resistant to corrosion when compared to nickel alloy and pure titanium. Nickel and chromium are more, so it makes t resistant to corrosive environments.

Buy cut-to-size A276 S31254 bright drawn round bar in the Middle East and South Africa, Get all thicknesses and dimensions of A182 F44 duplex ground and rolled polished bar

These rods are super resistant to corrosion. ASTM A182 F44 Duplex Steel Rods are designed with a combination of toughness resistance to chloride. It also resists stress corrosion cracking and pitting crevice corrosion with twice the 300 series steel strength.

Duplex 1.4547 Rods are used in food and chemical processing. It is also used in pulp and paper-bleaching plants. It is also used in air pollution control systems. Duplex Steel F44 Round Bar is more corrosion-resistant than the other steels. They possess excellent workability. They are used for urea production and in fatty acids.

ASTM A182 f44 round bar dimensions


ASTM A182 f44 round bar dimensions

ASTM A182 f44 round bar sizes


ASTM A182 f44 round bar sizes