ASTM A182 F51 round bar

ASTM A182 F51 Round Bar

The most troublesome thing about the piping industry is the long hierarchy that a buyer has to follow to buy ASTM A182 F51 round bar. However, the website pipingmaterial.ae eliminates the concept of middlemen and allows buyers to directly communicate with the factory or the manufacturer.

The website only hosts verified and genuine manufacturers after thorough inspection and research. They also have an on-ground verification of the supplier’s warehouses and manufacturing units by their field executives. Due to the elimination of a middleman, buyers can procure round bars at 30% to 40% less cost than other platforms.

Verified Supplier

ASTM A276 UNS S31803 forged bar and F51 duplex stainless steel rod suppliers in UAE

ASTM A182 F51 round bar specification

ASTM A182 f51 round bar specification

A276 UNS S31803 F51 round bar diameter A479 S31803 F51 hex bar size range ASTM A182 F51 flat bar size
  • 3mm to 800mm
  • Cut to length if required

Check ex-stock of F51 duplex rod in Saudi Arabia with above listed stockists & manufacturers

  • 2mm to 100mm A/F
  • Thickness: 2mm to 100mm
  • Width: 10mm to 500mm
A182 F51 square bar sizes ASTM A479 S31803 F51 forged bar length A182 gr F51 bar surface finish
  • 4mm to 100mm
  • up to 50 ft

Looking for cut to size F51 duplex bar material? Call directly to verified ASTM A182 F51 round bar suppliers in UAE

  • 6 RA
  • 32 RA
  • 63 RA
SA182 F51 precision straightness F51 duplex stainless steel bar stock uses & applications Meet Standard
  • 0.0015″ TIR/FT
  • 0.006″ TIR/FT
  • Oil & Gas
  • Shipbuilding
  • Construction
  • Machined equipments
  • Bearing
  • Rotational applications
  • Fasteners
  • Pump parts
  • Propeller shafts
  • Piston rods
  • Marine
  • Desalination plants
  • ISO 15156
  • ASTM A182 UNS S31803 F51
  • ASTM A276 UNS S31803 F51 Condition A
  • ASTM A479/ ASME SA 479
  • API
  • NACE MRO175
  • ASTM A923 test
Temperature limit ASTM A182 F51 polished bar common forms UNS S31803 bar European standard
  • 538°C (1000°F)
  • A276 UNS S31803 F51 flat bar
  • A182 F51 square bar
  • A182 gr F51 rectangular bar
  • F51 duplex steel hexagonal bar
  • EN 10272
  • EN 10088-3
  • BS EN 10088-3
Types of A182 gr F51 bar stock Finish ASTM A276 S31803 F51 rounds quality test & MTC
  • UNS S31803 F51 TGP bar (Turned
  • ASTM A182 grade F51 cold finished bar
  • & Polished)
  • A182 gr F51 blooms
  • F51 duplex stainless steel G&P
  • A182 F51 duplex boat shaft
  • ASTM A276 UNS S31803 F51 precision ground bar
  • Ground
  • A182 F51 duplex machined bar
  • Precision ASTM A276 UNS S31803 F51 polished rod
  • F51 duplex steel solution-annealed bar
  • SA182 F51 pump shaft (PSQ)
  • F51 duplex steel bearing shaft (BSQ)
  • UNS S31803 F51 forged bar
  • A479 S31803 F51 polished bar
  • ASTM A182 grade F51 billets
  • Cold drawn – CD
  • Smooth turned and polished – SMTP
  • Peeled- PLD
  • Centreless ground – CG
  • Black – BLK
  • Rough machined – RM
  • Hard chrome plated – CR
  • Extruded – EX

 

  • 3.1 certification
  • Non Destructive Testing
  • Mechanical Testing
  • Mettalographic Testing
  • Failure Analysis
  • PMI
F51 duplex steel round bar tolerance A479 S31803 F51 bar stock tolerance UNS S31803 F51 bar delivery condition
  • H9 – Cold drawn
  • H10 – Smooth-turned and Polished
  • K12 – Peeled (Dia up to 160mm)
  • +1.5mm/-0 – (Peeled over 160mm)
  • H9 or H8 – Centreless ground
  • F51 Hex bar – H11
  • F51 Square Bar – H11
  • Rough turned
  • Peeled
  • Bright drawn
  • Slit rolled edge
  • Centreless ground
  • Grinding
  • Precision ground
  • NOR – normalised
  • ANN – annealed
  • AR -as rolled
  • AC – as cast
  • H&T – hardened and tempered
  • IND HARD -induction hardened
  • Polished F51 duplex bar
  • ASTM A182 grade F51 black bar
  • Smooth turned
  • A182 F51 bright bar
ASTM A182 grade F51 cold drawn bar ISO tolerances A182 F51 duplex hot rolled bar ISO 286 tight tolerances ASTM A276 S31803 forged bar manufacturing technique
  • H6
  • H7
  • H8
  • H9
  • H10
  • H11
  • G5
  • G6
  • D8
  • D9
  • Hot Rolled
  • Forged
  • Cold Drawn

View duplex steel F51 shaft and A479 UNS S31803 hex bar standard specification, equivalent, and price in Dubai

A276 UNS S31803 F51 cold-drawn round bar stock

Dia Chamfering Length Tolerance
  • 0.1181 to 1.1811 in
  • 0.3748 in /above
  • 78.7401 to 275.5905 in
  • ASTM A484
  • As per requirement

F51 duplex centerless grinding bar stock

Diameter Tolerance Chamfering Length
  • 3/16″ – 1-3/16″ (0.2362 – 1.0000 in)
  • ASTM A484
  • As per client requirement
  • 0.3748 in
  • 79 – 275.5905 in

A182 gr F51 cold-drawn square bar stock

Dia Tolerance Length
  • 3/16″- 1″
  • ASTM A484
  • As specified
  • 79 – 276in

SA182 F51 cold-drawn hex bar stock

Diameter Tolerance Length
  • 0.1968 – 0.9842 in
  • ASTM A484
  • 78.7401 – 275.5905 in

UNS S31803 F51 bright bar surface

Matt No.6 Mirror Finish
Bright No.8
Hairline polished

Types of F51 duplex stainless steel bar

ASME SA182 F51 rolled bars

ASME SA182 F51 rolled bars

SA182 gr F51 flat bar

SA182 gr F51 flat bar

SA182 F51 s31803 cold rolled bars

SA182 F51 S31803 cold rolled bars

Duplex steel F51 continuous cast bars

Duplex steel F51 continuous cast bars

ASTM A182 F51 hex bar

ASTM A182 F51 hex bar

UNS s31803 normalized bars

UNS s31803 normalized bars

F51 duplex steel annealed bars

F51 duplex steel annealed bars

F51 duplex flat bar

F51 duplex flat bar

A182 gr F51 hexagon bar

A182 gr F51 hexagon bar

A182 F51 duplex round bar

A182 F51 duplex round bar

ASTM A182 grade F51 square bar

ASTM A182 grade F51 square bar

F51 duplex stainless steel rod

F51 duplex stainless steel rod

ASTM A276 UNS S31803 forged bar

ASTM A276 UNS S31803 forged bar

A276 UNS S31803 hexagonal bar

A276 UNS S31803 hexagonal bar

A479 UNS S31803 forged cold drawn bar

A479 UNS S31803 forged cold drawn bar

ASTM A479 S31803 polished bar

ASTM A479 S31803 polished bar

ASTM A276 S31803 peeled round bars

ASTM A276 S31803 peeled round bars

UNS S31803 F51 forged round bar

UNS S31803 F51 forged round bar

  • UNS S31803 round bar (most common)
  • UNS S31803 F51 hex bar
  • ASTM A182 Grade F51 flat bar
  • F51 duplex stainless steel square bar
  • A182 F51 duplex black bar
  • SA182 F51 bright bar
  • F51 Duplex rolled bar
  • A182 gr F51 normalized bars
  • ASTM A182 F51 continuous cast bars
  • UNS S31803 F51 peeled bars
  • A182 F51 duplex grinded machined bars
  • SA182 F51 quenched & tempered bars
  • ASTM A276 S31803 F51 cold rolled bars
  • A479 UNS S31803 F51 hardened & tempered bars

UNS S31803 round bar equivalent

UNS S31803
WNR 1.4462
AISI – A182 F51 (329LN)
AFNOR Z2CND22.05Az
BS (CAST) 332C15
BS (WROUGHT) 318S13
EN (10283) 1.4470

F51 duplex rod tolerances

View A276 S31803 F51 metric diameter tolerances

Dia – mm 1 < 3 3 < 6 6 < 10 10 < 18 18 < 30 30 < 50 50 < 80 80 < 120 120 < 180 180 < 250 250 < 315 > 315 – 400 > 400 – 500 > 500 – 600
ISO h6 0.006 0.008 0.009 0.011 0.013 0.016 0.019 0.022
ISO h7 0.010 0.012 0.015 0.018 0.021 0.025 0.030 0.035
ISO h8 0.014 0.018 0.022 0.027 0.033 0.039 0.046 0.054 0.063 0.072
ISO h9 0.025 0.030 0.036 0.043 0.052 0.062 0.074 0.087 0.100 0.115 0.130
ISO h10 0.040 0.048 0.058 0.070 0.084 0.100 0.120 0.140 0.160 0.185 0.210
ISO h11 0.060 0.075 0.090 0.110 0.130 0.160 0.190 0.220 0.250 0.290 0.320 0.360 0.400 0.440
ISO h12 0.100 0.120 0.150 0.180 0.210 0.250 0.300 0.350 0.400 0.460 0.520 0.570 0.630 0.700

ASTM A182 F51 physical properties

Density Thermal
Capacity
Thermal Expansion at 20-100°C Modulus of Elasticity Thermal Conductivity (W.m-¹.°C)
7.80 Kg/m³ 500 J.Kg-¹.K-¹ 13.0×10-6 200 GPa 16

A182 gr F51 mechanical properties

Yield strength Rp0.2 Tensile strength Rm, Elongation Hardness Impact, Charpy-V
BAR ≥ 450 MPa ≥ 655 MPa ≥ 25 % ≤ 270 HB ≥ 65, -46ºC
[J]

ASTM A479 S31803 chemical composition

Weight % PREN Cr P Mo S C Mn Ni N Si
Max. 23,0 0,025 3,50 0,010 0,030 2,00 6,50 0,20 1,00
Min. 35 22,0 3,00 4,50 0,14

ASTM A182 f51 round bar properties

F51 duplex steel hollow bar stock

OD (mm) 45 50 71 90 106 112 112 118 125
ID (mm) 28 25 45 63 56 63 80 80 90
Weight (KG/M) 8,07 11,98 19,43 26,87 51,52 54,71 40,07 48,71 49,15
OD (mm) 132 140 150 160 170 190 212 236 250
ID (mm) 106 100 106 112 128 132 170 150 200
Weight (KG/M) 41,53 62,60 73,33 84,88 83,50 121,29 107,62 213,51 150,80

Check ASTM A276 S31803 square bar and UNS S31803 F51 duplex steel flat bar chemical composition & mechanical properties

You can easily buy pieces when you’re purchasing from suppliers from pipingmaterial.ae. It is an online platform that enables ASTM A276 UNS S31803 buyers from the Middle East to purchase from anywhere in the world.

The website has a list of ten suppliers from each region. They follow techniques, like field visits, inspections, etc., to verify suppliers. Hence, buyers can buy even a small piece of round bar without paying the full price of the material from the website.

ASTM A479 S31803 rectangular bar and F51 duplex bright bar in peeled, centerless ground, and polished condition

The standard specification of the F51 round bar is Duplex 2205. Other equivalents are UNS S 31803 and Werkstoff Nr. 1.4462. It consists of chromium, nickel, iron, manganese, molybdenum, and carbon. The material’s tensile strength and resistance to stress-cracking corrosion are outstanding. Hence, they’re widely popular in the petrochemical, desalination, oil, and gas industries.

Check duplex steel F51 cold drawn bar sizes and weight chart in the Middle East, Select certified suppliers and minimize risk

The density of the A182 gr F51 flat bar is 7.8 g/cm3 at 20 degrees Celsius. Its chemical composition is 21% to 23% Chromium, 4.5% to 6.5% Nickel, 2.5% to 3.5% Molybdenum, 2% Manganese, 1% Silicon, 0.8% to 2% Nitrogen, 0.03% Phosphorus, 0.03% Carbon, and 0.02% Sulfur. The material’s yield strength is 450 MPa and its tensile strength is 620 MPa. Its elongation is 25%.

Yes, ASTM A479 S31803 bright bar can be polished. The polishing of the material usually happens with a bright bar polishing machine or belt polishing machine. Electropolishing of the bright bars is also possible and it also increases the corrosion resistance.

The bright bars have a great precision and surface finish that is useful in various industries. The various surface finishes of duplex bars are bright black finish, smooth, turned, centerless grounded, forged rough, etc.

The tolerances of cold-drawn UNS S31803 round bar for sizes between 6 mm to 400 mm ranges from 0.07 mm to 0.25 mm. You can multiply both the diameters of the cold-drawn bars with 0.00623 to get its weight per meter. When you multiply the diameters of the bar with 0.0019, you will get its weight per foot.