ASTM A182 F53 round bar

ASTM A182 F53 Round Bar

The best way to find round bar manufacturers in the UAE is by visiting the website, pipingmaterial.ae. You can find verified and genuine ASTM A182 F53 round bar manufacturers on this website without any effort. The website shows ten verified suppliers according to your geographic location.

Also, you can directly communicate with the factory personnel to place your order without the involvement of any middlemen. Hence, you can get your round bars at a very economical price.

Verified Supplier

ASTM A276 UNS S32750 rod and ASTM A182 grade F53 forged bar suppliers in UAE

ASTM A182 F53 round bar specification

ASTM A182 f53 round bar specification

F53 duplex steel round bar diameter A182 F53 hex bar size range SA182 F53 flat bar size
  • 3mm – 800mm

Custom sizes ASTM A182 F53 rod stock available with above manufacturers and suppliers, get estimate now!

  • 2mm to 100mm A/F
  • Width: 10 – 500mm
  • Thickness: 2 -100mm
A182 gr F53 square bar sizes F53 duplex forged bar length ASTM A276 UNS S32750 F53 surface finish
  • 4 to 100mm
  • Above 50ft

Looking for cut to size A276 F53 bar material? Call directly to verified ASTM A182 F53 round bar suppliers in UAE

  • RA – 6
  • RA – 32
  • RA – 63
A479 S32750 F53 bar precision straightness A182 F53 duplex hot rolled bar stock uses & applications Meet Standard
  • TIR/FT – 0.0015″
  • TIR/FT – 0.006″
  • Pump parts
  • Marine
  • Propeller shafts
  • Rotational applications
  • Fasteners
  • Bearing
  • Desalination plants
  • Construction
  • Machined equipments
  • Piston rods
  • Oil & Gas
  • Shipbuilding
  • ASTM A923 test
  • NACE MRO175
  • ASTM A479
  • ASTM A276 S32750 F53 Condition A
  • ISO 15156
  • API
  • ASTM A182 S32750 F53
Temperature limit SA182 F53 rounds common forms A182 gr F53 polished bar european standard
  • 1025°C – 1120°C
  • ASTM A182 F53 rectangular bar
  • F53 duplex flat bar
  • A182 F53 square bar
  • A479 S32750 F53 hexagonal bar
  • EN 10272
  • BS EN 10088-3
  • EN 10088-3
Types of F53 duplex stainless steel bar stock Value added services ASTM A276 S32750 F53 bright bar quality test & MTC
  • ASTM A182 F53 billets
  • F53 duplex steel solution-annealed bar
  • A182 F53 blooms
  • ASTM A479 UNS S32750 F53 boat shaft
  • F53 Duplex precision ground bar
  • SA182 F53 forged bar
  • A182 F53 duplex TGP bar
  • UNS S32750 F53 bearing shaft (BSQ)
  • F53 duplex stainless steel polished bar
  • A479 S32750 F53 G&P
  • ASTM A182 F53 pump shaft (PSQ)
  • Precision F53 duplex steel polished rod
  • F53 duplex cold finished bar
  • SA182 F53 machined bar
  • Saw Cutting
  • Centerless Grinding
  • Press Straightening
  • Heat Treating
  • CNC Machining
  • End Conditioning
  • Press Straightening
  • Custom Packaging
  • Rotary Straightening
  • Chrome Plating
  • Pre-Straightening
  • Centerless Turning
  • Mettalographic Testing
  • PMI
  • Failure Analysis
  • Mechanical Testing
  • Non Destructive Testing
  • 3.1 certification
A182 F53 precision ground bar tolerance Machined UNS S32750 F53 bar stock tolerance F53 duplex steel bar delivery condition
  • -0 / +1.0mm
  • h6 Tolerance
  • SA182 F53 bright bar
  • NOR – normalised
  • ANN – annealed
  • AC – as cast
  • Polished F53 duplex bar
  • Hot rolled
  • Bright drawn
  • IND HARD -induction hardened
  • A182 F53 duplex black bar
  • precision ground
  • H&T – hardened and tempered
  • Slit rolled edge
  • AR -as rolled
  • Cold drawn
  • Grinding
  • Smooth turned
SA182 F53 cold drawn bar ISO tolerances F53 duplex steel forged bar ISO 286 tight tolerances ASTM A182 F53 rod manufacturing technique
  • H6
  • H7
  • H8
  • H9
  • H10
  • H11
  • G5
  • G6
  • D8
  • D9
  • Hot Rolled
  • Cold Drawn
  • Forged

Get ASTM A479 UNS S32750 hex bar and A182 F53 square bar with ULTRA SONIC 100% OKIE test

F53 duplex steel cold-drawn round bar stock

Length Chamfering Diameter Tolerance
  • 79 – 276 in
  • 0.3748 in
  • 0.1181 to 1.1811 in
  • ASTM A484

A182 F53 centerless grinding bar stock

Diameter Chamfering Length Tolerance
  • 0.2362 – 1.0000
  • 0.3748
  • 78.7401 – 275.5905 in
  • ASTM A484

SA182 F53 cold-drawn square bar stock

Diameter Length Tolerance
  • 3/16″ to 1″
  • 78.7401 – 276
  • ASTM A484

F53 duplex cold-drawn hex bar stock

Diameter Tolerance Length
  • 0.1968 – 0.9842 in
  • ASTM A484
  • As specified
  • 78.7401 – 275.5905

A182 gr F53 bright bar surface

Matt No.6 Mirror Finish
Hairline / Bright No.8

Types of F53 duplex stainless steel bar

ASME SA 182 f53 cold rolled bars

ASME SA 182 F53 cold rolled bars

ASTM A182 f53 rod

ASTM A182 F53 rod

A182 f53 super duplex flat bar

A182 F53 super duplex flat bar

SA-182 f53 s32750 square bar

SA-182 F53 s32750 square bar

A182 f53 uns s32750 hardened & tempered bars

A182 F53 uns s32750 hardened & tempered bars

SAF 2507 F53 bar

SAF 2507 F53 bar

ASTM A182 gr F53 continuous cast bars

ASTM A182 gr F53 continuous cast bars

ASTM A182 F53 hex bars

ASTM A182 F53 hex bars

A182 F53 super duplex steel hot rolled bars

A182 F53 super duplex steel hot rolled bars

UNS S32750 grinded machined bars

UNS S32750 grinded machined bars

SA182 F53 hexagonal bar

SA182 F53 hexagonal bar

ASTM A182 Gr F53 flats

ASTM A182 Gr F53 flats

super duplex f53 rod

Super duplex F53 rod

UNS S32750 f53 rectangular bar

UNS S32750 F53 rectangular bar

F53 duplex stainless steel normalized bars

F53 duplex stainless steel normalized bars

ASTM A182 Grade F53 bright bar

ASTM A182 Grade F53 bright bar

A182 F53 Duplex annealed bars

A182 F53 Duplex annealed bars

F53 Duplex Steel black bars

F53 Duplex Steel black bars

ASTM A276 UNS S32750 forged bar

ASTM A276 UNS S32750 forged bar

ASTM A479 UNS S32750 forged bars

ASTM A479 UNS S32750 forged bars

A276 S32750 forged cold drawn bar

A276 S32750 forged cold drawn bar

A479 S32750 ground and rolled polished bar

A479 S32750 ground and rolled polished bar

ASTM A479 S32750 peeled round bars

ASTM A479 S32750 peeled round bars

ASTM A276 S32750 forged round bar

ASTM A276 S32750 forged round bar

  • ASTM A182 F53 cold rolled bars
  • F53 duplex steel hardened & tempered bars
  • ASTM A182 Grade F53 round bar
  • UNS S32750 F53 hex bar
  • F53 Duplex Stainless Steel square bar
  • ASTM A276 UNS S32750 flat bar
  • A182 F53 continuous cast bars
  • SA182 F53 hot rolled bars
  • UNS S32750 F53 grinded machined bars
  • F53 duplex stainless steel normalized bars
  • A276 S32750 F53 quenched & tempered bars
  • ASTM A479 S32750 F53 annealed bars
  • F53 duplex steel bright bars
  • ASTM A182 F53 black bars
  • SA182 F53 forged bars
  • A276 S32750 F53 rolled bars
  • A182 F53 peeled bars

ASTM A276 S32750 F53 equivalent

Standard ASTM A182 F53
UNS S32750
WNR 1.4410
EN X2CrNiMoN25.7.4
AFNOR Z3CND25.07Az

F53 duplex steel forged bar tolerances

Check S32750 F53 hot rolled bar tolerances

Diameter in inch
Over, incl
Diameter Tolerances
over(+) / under(-)
0.875 – 1 +/- 0.009″
1 – 1.125 +/- 0.010″
1.125 – 1.25 +/- 0.011″
1.25 – 1.375 +/- 0.012″
1.375 – 1.5 +/- 0.014″
1.5 – 2 + 1/64″
2.5 – 3.5 + 3/64″
3.5 – 4.5 + 0.0625″
4.5 – 5.5 + 5/64″
5.5 – 6.5 + 0.125″
6.5 – 8 + 5/32″
8 – 12 + 0.1875″
12 – 15 + 7/32″

ASTM A479 S32750 F53 rod physical properties

Density Melting point Thermal conductivity Electrical Resistivity Modulus of Elasticity
7.8 g/cm3 1350 °C 20°C. 15. W.m¹.K¹  20°C. 0.80. Ω.mm².m¹. at 20°C, 200 gpa

SA182 F53 bright bar mechanical properties

Proof Stress
0.2%
Tensile Strength Elongation
A5
Hardness Max
550 MPa 795 MPa 15 % 310 HB 32* HRB

F53 duplex polished bar chemical composition

Si P C Mn S Mo Cr Ni Other N
0.80 0.035 0.030 1.20 0.020 3.0/5.0 24.0/26.0 6.00/8.00 Cu:0.50 0.24/0.32

ASTM A182 f53 round bar properties

Buy A276 S32750 rectangular bar at affordable prices from genuine and verified F53 duplex bright bar suppliers in Dubai

If you’re a trader and you want to sell an ASTM A479 UNS S32750 bar, you can provide a request for your listing on pipingmaterial.ae . It is an online platform for buyers in the Middle East region. If you’re verified and listed on the website, you can get many orders.

For the supplier listing, field executives from Explore Middle East FZE will give a field visit and analyze and assess your products. Once you get approval, you can sell your piping bars in the Middle East.

Ultrasonic Testing is a non-destructive testing method that detects the flaws in the ASTM A276 UNS S32750 hex bar and rounds. It is one of the best non-invasive methods to find defects in a material before manufacturing or application. This test uses high-frequency sound waves between 500 kHz to 20 MHz.

These sound waves pass through a material easily if there are no defects. However, the waves reflect when there is a defect. You can get a 3-D representation of the distance between the defects via ultrasonic testing. Moreover, you can determine the thickness of the material via ultrasonic testing.

A479 S32750 polished bar are available in 3mm, 5mm, 10mm, 12mm, and custom sizes. Get connected with verified UNS S32750 F53 bright drawn round bar suppliers in the Middle East

The standard sizes of the A276 S32750 rectangular bar range between 33 mm*30 mm to 295 mm*1066 mm. The thickness of the rectangular bars ranges between 3 mm to 12 mm. The material has great corrosion resistance, tensile strength, durability, and impact resistance. They are widely applicable in engineering, construction, marine, shipbuilding, etc.

Buy A182 gr F53 cold finished round bar at the lowest price, Get connected with trusted and genuine UNS S32750 annealed bar suppliers in UAE

The UNS S32750 F53 polished bar has a high content of chromium and molybdenum. Hence, it provides resistance to heat, pressure, and corrosion. They have improved strength and durability at extreme temperatures and pressures.

They are very ductile materials with great weldability and workability. At high temperatures, these bars are resistant against stress-cracking corrosion. Hence, they are applicable in several industries, like construction, chemical, petrochemical, etc.

The production method of the bright-drawn F53 round bar includes drawing the material in cold-reduction mills. The process involves cooling the raw material at room temperature followed by annealing, turning the material, grinding, and polishing the material.

They provide dimensional precision compared to polished bars. They are applicable in making fasteners, rails, automobile components, etc.

The cold-finished UNS S32750 round bar production includes cooling hot rolled steel and further cold drawing the material. The cold-finished round bars have great uniformity and precision. Also, they have a great surface finish and outstanding properties, like strength, corrosion resistance, durability, toughness, etc.

The A479 S32750 rod undergoes solution annealing at around 600 degrees Fahrenheit after forging the material at 1880 degrees Fahrenheit. Annealed stainless steel has improved corrosion resistance, hardness, and ductility. However, they do not have fine precision and a good surface finish.