ASTM A815 UNS S32760 Fittings

ASTM A815 UNS S32760 Fittings

The alloy has excellent corrosion resistance properties, even when exposed to highly corrosive media. In a marine environment, the ASTM A815 UNS S32760 Fittings exhibit high resistance to pitting. Chemically, the alloy differs from UNS S32760 because it contains added Copper and tungsten.

Verified Supplier

Verified Stockists (Contact directly for best price)

Find ASTM A815 WPS 32760 elbow and buttweld tee suppliers in UAE

ASTM A815 UNS S32760 specification

ASTM A815 UNS S32760 fittings specification

A815 UNS S32760 buttweld fittings sizes UNS S32760 fittings meet the requirements A815 UNS S32760 pipe fittings schedule chart
  • A815 WPS S32760 seamless fittings : 1/2″ – 24″ (BW)
  • ASTM A815 WPX UNS S32760 welded fittings : 24 – 96″ (BW)
  • NACE MR0103
  • MTC EN 10204-3.1
  • Sour service
  • ISO 15156
  • NACE TM-0284
  • NACE MR0175
  • SCH 10
  • XXH
  • SCH 40
  • SCH 160
  • SCH 60
  • SCH 80
  • SCH 20
  • STD
  • XH
American standard & specification SA 815 S32760 design standard ASTM A815 S32760 manufacturing technique
  • Seamless fittings: ASTM A815 wp-s UNS S32760
  • Welded fittings: ASTM A815 wp-x UNS S32760

Contact above ASTM A815 UNS S32760 Fittings suppliers who supplied seamless & welded material in Oman, South Africa, Egypt, Saudi Arabia & USA

  • MSS-SP-43
  • MSS-SP-83
  • MSS-SP-95
  • ANSI/ ASME B16.25
  • ANSI / ASME B16.9
  • ANSI/ ASME B16.28 (butt welding ends)
  • Hot forming
Ends of A815 S32760 buttweld fittings Meet standard ASTM A815 S32760 testing reqirements
  • Bevelled
  • JIS B2312
  • JIS B2313
  • DIN 2605
  • DIN2615
  • DIN2616
  • HIC tested
  • Positive Material Identification (PMI)
  • Magnetic Particle Examination (For above Sch 80 ASTM A815 S32760 bevel ends)
  • Ultrasonic test

Send your drawing to above ASTM A815 UNS S32760 Fittings suppliers & manufacturers & get lowest quote quickly

SA 815 S32760 bend radius UNS S32760 super duplex bend angle
  • 6D
  • 8D
  • 3D
  • 10D
  • 4D
  • 5D
  • 90 Deg
  • 30 Deg
  • 45 Deg
  • 22.5 Deg
  • 60 Deg

Get connected with trusted manufacturers of A815 S32760 tee, and purchase UNS S32760 concentric/ eccentric reducer in schedule 10 to 180 for a reasonable price in Dubai

UNS S32760 super duplex pipe bend

Types Standard Dimensions
  • ASTM A815 S32760 long radius bend
  • A815 UNS S32760 short radius bend
  • ASTM A815 S32760 J bend
  • SA 815 S32760 L bend
  • ASTM A815 UNS S32760 mitered pipe bend
  • ASTM A815 S32760 2.5d pipe bend
  • A815 S32760 3d pipe bend
  • A815 S32760 return bend
  • A815 WPS S32760 5d pipe bend
  • UNS S32760 super duplex 10d pipe bend
  • SA 815 S32760 22d pipe bend
  • A815 S32760 piggable bend
  • SA 815 S32760 hot induction bend
  • SA 815 UNS S32760 seamless pipe bend
  • ASTM A815 UNS S32760 welded pipe bend
  • EN/ DIN 1.4410
  • ASME B16.49
  • ASME B16.9
  • DN15 – DN 1500
  • OD 1/2” to 60”

ASTM A815 wp-s UNS S32760 elbow

Types Standard Dimensions
  • SA 815 S32760 buttweld elbow
  • 45 degree A815 UNS S32760 elbow
  • 180 degree UNS S32760 super duplex elbow
  • SA 815 UNS S32760 3d elbow
  • A815 S32760 long radius elbow
  • 90 degree ASTM A815 UNS S32760 elbow
  • ASTM A815 S32760 short radius elbow
  • ASME B16.9
  • JIS B2312
  • DIN 2615
  • 1/2” – 48”

A815 S32760 tee & reducer

Types Standard Dimensions
  • A815 S32760 buttweld tee
  • SA 815 S32760 reducing tee
  • UNS S32760 super duplex buttweld reducer
  • UNS S32760 super duplex swept tee
  • A815 UNS S32760 saddle tee
  • ASTM A815 UNS S32760 barred tee
  • SA 815 UNS S32760 equal tee
  • SA 815 UNS S32760 lateral tee
  • A815 S32760 Y tee
  • SA 815 S32760 concentric reducer
  • SA 815 UNS S32760 eccentric reducer
  • ASME B16.9
  • 1/2” – 48”

SA 815 S32760 stub end & cap

Types Standard Dimensions
  • ASTM A815 S32760 long stub end
  • SA 815 S32760 seamless end cap
  • A815 UNS S32760 short stub end
  • SA 815 UNS S32760 welded end cap
  • A815 S32760 lap joint stub end
  • ASME B16.9
  • MSS SP-43 type B
  • MSS SP-43 type C
  • MSS SP-43 type A
  • 1/2” – 36”

A815 UNS S32760 equivalent standard

STANDARD UNS WERKSTOFF NR.
Super Duplex 2507 S32760 EN 1.4410/ F55

ASTM A815 S32760 chemical composition

UNS S32760
C 0.03
Mn 1
P 0.03
S 0.01
Si 1
Cr 24.0-26.0
Ni 6.0-8.0
Mo 3.0-4.0
N 0.20-0.30
Cu 0.50-1.00
Other W 0.50-1.0

SA 815 UNS S32760 mechanical properties

Grade S32760
Tensile strength, min., ksi [MPa] 109 [750]
Yield strength, min., ksi [MPa] 80 [550]
Elongation in 2 in., or 50mm, min, % 25
Hardness, Max Brinell 300

ASTM A815 UNS S32760 fittings material

A815 UNS S32760 physical properties

Density Modulus of Elasticity Coefficient of Thermal Expansion 68-212°F/°F Thermal Conductivity Heat Capacity Electrical Resistivity
lb/in3 psi x 106 x10-6/°F Btu/h ft °F Btu/lb/°F W-in x 10-6
0.28 29 7.2 8.7 0.12 31.5

Schedule 40 SA 815 S32760 buttweld elbow weight chart

Schedule 40 Elbow Weight in kg
DN NPS WEIGHT
15 1/2 0.08
20 3/4 0.11
25 1 0.15
32 1 1/4 0.25
40 1 1/2 0.39
50 2 0.66
65 2 1/2 1.37
80 3 2.19
90 3 1/2 2.96
100 4 4.12
125 5 6.89
150 6 10.7
200 8 21.6
250 10 37
300 12 61
350 14 85.1
400 16 121
450 18 176
500 20 232
550 22 /
600 24 377

Check out the range of high-quality ASTM A182 S32760 stub end to deliver throughout the Middle East, UNS S32760 buttweld elbow supply with Brinell hardness test

Caps are fittings that terminate the further flow of media by providing an end to a pipe. Almost all industries that have piping systems use endcaps. Sometimes, an end cap is used to protect the ends of a pipe – in case of modification in its system. They could be welded to pipes to prevent leaks and keep the media in pipelines free from oxidation or spontaneous reactions.

Elbows are fittings that influence the direction of flow in a piping system. They may or may not connect pipes with two different diameters. Available in 45, 90 or any customized angle, they change the flow of media by the degree it is produced. The degree to which the elbow is attached will dictate how fast or slow the media will flow through a pipe.

Get quote from various UNS S32760 fittings suppliers. SA 815 S32760 duplex steel equal/ reducing tee is available with mill test reports in Dubai

Advantages –

  • The alloy has very high corrosion resistance properties including – pitting, erosion, crevice and general corrosion.
  • They have high mechanical strength and can resist stress corrosion cracking when exposed to halides.

Disadvantages –

  • Although the alloy has exceptional properties and is used as a substitute for expensive nickel fittings, the impact strength is slightly reduced when exposed to lower temperatures.
View corrosion-resistant super duplex WPS S32760 pipe bend, buy UNS S32760 short/ long radius elbow at affordable prices from audited stockists & importers in Middle East countries

One of the most resilient alloys, these super duplex fittings have a PREN value of more than 40. They are often used as alternatives like 300 series and precipitation hardening fittings, in highly demanding applications.