ASTM F468 UNS N06625 Bolts Summary
| Grade | ASTM F468 UNS N06625 Bolts |
|---|---|
| DIN Standard | DIN 933, DIN 931, DIN 912, DIN 934, DIN 970, DIN 6923, DIN 603, DIN 7982, DIN 7981, DIN 7985, DIN 913, DIN916 |
| Threads Specification | UNC, UNJF-3A, 8UN, UNF-3B, NPT, UNEF, UNS, UNF, BSF, NPTF, BSW, Metric Fine, Metric Course |
| Manufacturing Standard | ASME B18.6.3, ANSI B1.1, IS:1364, ASME B18.2.1, BS 3692, UNI 5737, GB5783 |
| ISO Standard | ISO 4032, ISO 4017, ISO 7380, ISO 4014, ISO 4033 |
| Standard Sizes in mm | M36, M30, M27, M24, M20, M16, M14, M12, M10, M8, M6, M5, M4, |
Metric/ Imperial ASTM F468 Inconel 625 Socket Head Cap Screw suppliers in UAE, view dimensions & testing
ASTM F468 UNS N06625 Bolts Specification
Metric Sizes : M1.2 – M48, 1/4″ – 4″
Heads : Hex Flange, Round, Square, Hex Head, T-head, Flat, Triangular
ASTM F468 UNS N06625 Fasteners Type: Washers, Nuts, Screws, Hex Bolts
Make : Sundaram, UNBRAKO, TVS, PFL, LPS, Fischer, BOSSARD, DFL, VIF, BOLTMASTER
Buy Directly from ASTM F468 UNS N06625 Bolts suppliers in UAE
100% Tested ASTM F468 UNS N06625 Bolts with MTC EN 10204/3.1
How do F468 N06625 Allen Head Screw perform when exposed to higher stress & extreme temperature condition ?
- Excellence Fatigue Resistant
- Stress & Corrosive Synergy
- Solid Solution Strengthen
- Good Creep Resistance
- Stability at Higher Thermal
F468M Ni 625 Hex Bolts in Annealed condition, check Ex-stock of F468 N06625 Studs with verified manufacturers & suppliers
F468 UNS N06625 Flange Bolts Heat Treatment
| Grade | Heat Treatment | |
|---|---|---|
| Temperature | Condition | |
| ASTM F468 Inconel 625 | 2150°F (1177°C) | Annealed |
Storage Sites of Partner Suppliers
| City | Region | Country |
|---|---|---|
| Dubai | Middle East | United Arab Emirates |
| Abu Dhabi | Middle East | United Arab Emirates |
| Dammam | Middle East | Saudi Arabia |
| Riyadh | Middle East | Saudi Arabia |
| Doha | Middle East | Qatar |
| Abuja | Africa | Nigeria |
| Kuwait City | Middle East | Kuwait |
| Jeddah | Middle East | Saudi Arabia |
| Cairo | MENA | Egypt |
| Casablanca | MENA | Morocco |
| Johannesburg | Africa | South Africa |
| Cape Town | Africa | South Africa |
| Lagos | Africa | Nigeria |
Most Common Types of ASTM F468 UNS N06625 Bolts
ASTM F468 UNS N06625 Hex Bolts
F468 625 Inconel Heavy Hex Bolt
ASTM F468m N10276 Flange Bolts
ASTM F468m N06625 Square Bolts
F468m N06625 Eye Bolts
ASTM F468 Inconel 625 Hex Head Bolt
F468 625 Inconel Round Head Bolts
Alloy F468 N06625 Plow Bolt
ASTM F468 Alloy 625 Shoulder Bolt
F468 Inconel Alloy 625 Carriage Bolt
ASTM F468 Inconel N06625 Elevator Bolt
F468 Ni UNS N06625 Anchor Bolt
Alloy F468 N06625 Socket Head Cap Screws Popular Forms
F468 Ni UNS N06625 Socket Head Cap Screws
Nickel Alloy N06625 Hex Head Cap Screw
ASTM Alloy F468 UNS N06625 Countersunk Screws
F468 N06625 Hex Cap Screw
ASTM F468 Nickel Alloy 625 Hexagon Socket Head Cap Screw
ASTM F468 N06625 Nickel Alloy Allen Head Screw
F468 Nickel UNS N06625 Button Head Cap Screw
Inconel N06625 Flat Head Cap Screw
ASTM F468 625 Inconel Cap Head Screw
Various Types of Alloy N06625 Threaded Studs
Alloy N06625 Threaded Rod
ASTM F468 UNS N06625 Stud Bolt
F468 UNS N06625 All Thread
ASTM F468 Inconel 625 Threaded Studs
F468 625 Inconel Double End Stud Bolts
ASTM F468 Inconel N06625 Fully Threaded Studs
Nickel Alloy N06625 Anchor Stud Bolt
ASTM Alloy F468 UNS N06625 Eye Stud Bolt
F468 Nickel UNS N06625 Tap End Stud Bolts
ASTM F468 625 Inconel Welding Studs
F468 N06625 Plain Stud Bolt
Inconel Alloy F468 625 Welded Stud Bolt
ASTM F468 N06625 Heavy Hex Bolts as per NACE MR0175/ ISO 15156/ ASME B18.2.1 standard
F468 625 Inconel Heavy Hex Bolt Dimension Chart
| Nominal Bolt Sizes (Inch) | C | F | D | H | |||||
|---|---|---|---|---|---|---|---|---|---|
| Width Across Corners | Width Across Flats | Body Diameter | Height | ||||||
| Min | Max | Basic | Min | Max | Max | Basic | Min | Max | |
| 2-1/2 | 4.275 | 4.474 | 3-7/8 | 3.750 | 3.875 | 2.559 | 1-21/32 | 1.479 | 1.708 |
| 2-1/4 | 3.862 | 4.041 | 3-1/2 | 3.388 | 3.500 | 2.305 | 1-1/2 | 1.327 | 1.548 |
| 2 | 3.449 | 3.608 | 3-1/8 | 3.025 | 3.125 | 2.039 | 1-11/32 | 1.175 | 1.388 |
| 1-3/4 | 3.035 | 3.175 | 2-3/4 | 2.662 | 2.750 | 1.785 | 1-5/32 | 1.054 | 1.196 |
| 1-1/2 | 2.622 | 2.742 | 2-3/8 | 2.300 | 2.375 | 1.531 | 1 | 0.902 | 1.036 |
| 1-3/8 | 2.416 | 2.526 | 2-3/16 | 2.119 | 2.188 | 1.404 | 29/32 | 0.810 | 0.940 |
| 1-1/4 | 2.209 | 2.309 | 2 | 1.938 | 2.00 | 1.277 | 27/32 | 0.749 | 0.876 |
| 1-1/8 | 2.002 | 2.093 | 1-13/16 | 1.756 | 1.812 | 1.149 | 3/4 | 0.658 | 0.780 |
| 1 | 1.796 | 1.876 | 1-5/8 | 1.575 | 1.625 | 1.022 | 43/64 | 0.591 | 0.700 |
| 7/8 | 1.589 | 1.660 | 1-7/16 | 1.394 | 1.438 | 0.895 | 37/64 | 0.531 | 0.604 |
| 3/4 | 1.383 | 1.443 | 1-1/4 | 1.212 | 1.250 | 0.768 | 1/2 | 0.455 | 0.524 |
| 5/8 | 1.175 | 1.227 | 1-1/16 | 1.031 | 1.062 | 0.642 | 27/64 | 0.378 | 0.444 |
| 1/2 | 0.969 | 1.010 | 7/8 | 0.850 | 0.875 | 0.515 | 11/32 | 0.302 | 0.364 |
Sales Agents in Following Locations
| Muscat | Riyadh | Dubai | Ras Al Khaimah |
|---|---|---|---|
| Sharjah | Fujairah | Umm Al Quwain | Doha |
| Saudi Arabia | Al Jubail | Abu Dhabi | Ajman |
Inconel N06625 Countersunk Head Screw Testing Method
- Tensile
- Hardness
- Impact
- Corrosion
Warehouse Locations of Partner Suppliers
| Middle East countries | Qatar, Lebanon, Bahrain, Saudi, Kuwait, UAE, Jordan, Iraq, Syria, Iran, Yemen |
|---|---|
| Africa | Nigeria, South Africa, Kenya, Morocco, Egypt, Tunisia, Algeria |
| MENA | Morocco, Libya, Algeria, Tunisia, Egypt, Israel, Palestine |
Finishing on ASTM F468 Inconel 625 Threaded Rod
Contact genuine F468 UNS N06625 Stud Bolts manufacturers in UAE, refer F468AC Ni 625 fasteners allowable stress and temperature limit
ASTM F468 Nickel Alloy 625 All Thread Temperature Range
| UNS | Temperature Range |
|---|---|
| Alloy N06625 | 982°C (1800°F) |
Material Permeability for F468 Ni UNS N06625 Hex Cap Screws
- 1.0006 (15.9 kA/m) is material permeability for f468 Ni UNS n06625 hex cap screws
Check Out Your Nearby Locations For Fastest Deliveries
| Country | Cities |
|---|---|
| Netherlands | The Hague |
| Belgium | Meeuwen-Gruitrode |
| Netherlands | Amsterdam |
| Belgium | Antwerp |
| Netherlands | Haarlem |
| Belgium | Brussels |
| Belgium | Seraing |
| Belgium | Ghent |
| Belgium | Leuven |
| Netherlands | Eindhoven |
| Belgium | Westerlo |
| Netherlands | Rotterdam |
ASTM F468 Inconel 625 Fasteners Weight Chart
| Nominal Sizes (Inch) | Heavy Square | Heavy Hex Jam | Heavy Hex | Finished Jam | Finished Hex | Square |
|---|---|---|---|---|---|---|
| 2 | – | 165 | 299 | 140 | 224 | – |
| 4 | – | 1200 | 2180 | – | – | – |
| 3 1/2 | – | 851 | 1526 | – | – | – |
| 1 | 51.5 | 23.5 | 42.5 | 17.6 | 28.3 | 36.3 |
| 3 1/4 | – | 651 | 1194 | – | – | – |
| 2 1/2 | – | 332 | 564 | – | – | – |
| 1 1/2 | 161 | 74.8 | 131 | 60.9 | 94.3 | 122 |
| 1 3/4 | – | 114 | 204 | 100 | 151 | – |
| 3/4 | 23.5 | 11 | 19.3 | 7.7 | 11.9 | 15.4 |
| 1 7/8 | – | 134 | 241 | – | – | – |
| 3 | – | 545 | 950 | – | – | – |
| 3 3/4 | – | 1005 | 1812 | – | – | – |
| 1 3/8 | 125 | 59.3 | 102 | 47.9 | 73 | 94.5 |
| 1/2 | 7.87 | 4 | 6.54 | 2.62 | 3.75 | 5.78 |
| 1 1/8 | 72.4 | 32.4 | 59.2 | 24.7 | 40.3 | 52.5 |
| 2 3/4 | – | 429 | 738 | – | – | – |
| 1 5/8 | – | 91.6 | 162 | – | – | – |
| 1 1/4 | 95.5 | 45.8 | 78.6 | 36.1 | 54.3 | 70.6 |
| 7/8 | 36.2 | 16.7 | 29.7 | 12 | 19 | 24.5 |
| 5/8 | 14.3 | 6.96 | 11.9 | 4.93 | 7.33 | 10.8 |
| 2 1/4 | – | 227 | 419 | – | – | – |
Various Material of ASTM F468 UNS N06625 Bolts
ASTM F468M Alloy 625 Hexagon Bolts as per DIN 933 & F468 Ni UNS N06625 Grub Screws as per IS 2388 in UNC/ UNRC threads
Applications of using Nickel Alloy N06625 Button Head Cap Screw
We carry a wide range of selection of ASTM F468 UNS N06625 Bolts from top trusted manufacturers of Dubai and Ras Al Khaimah.
ASTM F468 N06625 Nickel Alloy Shoulder Bolt Key Properties
- Excellence Corrosive & Oxidation Resistant
- Materials Toughne & Higher Strength
- Heat resistance Upto ~1000°C
- Fatigue & Thermal Fatigue Resistance
- Weldable
Torque Chart for F468m N06625 Screw
| Diameter (Inch) | Threads (Inch) | Torque ft-lb | |
|---|---|---|---|
| Lubricated | Dry | ||
| 7/16″ | 14 To 20 | 33.9-37.8 | 45.1-50.4 |
| 3/8″ | 16 To 24 | 21.2-23.9 | 28.2-32.0 |
| 5/16″ | 18 To 24 | 12.0-13.2 | 15.9-17.6 |
| 1″ | 8 To 14 | 441-495 | 588-659 |
| 1-1/2″ | 6 To 12 | 1335-1502 | 1780-2003 |
| 1-1/4″ | 7 To 12 | 767-849 | 1024-1133 |
| 7/8″ | 9 To 14 | 294-324 | 392-433 |
| 3/4″ | 10 To 16 | 183-204 | 244-271 |
| 5/8″ | 11 To 18 | 102.8-116.4 | 137.0-155.2 |
| 9/16″ | 12 To 18 | 74.5-83.1 | 99.2-110.8 |
| 1/2″ | 13 To 20 | 51.6-58.2 | 68.8-77.6 |
F468 Inconel Alloy 625 Studs Chemical Composition
| Grade | Cobalt, (max.) | Sulfur, (max.) | Manganese, (max.) | Phosphorus, (max.) | Titanium (max.) | Aluminum (max.) | Chromium | Molybdenum | Iron, (max.) |
|---|---|---|---|---|---|---|---|---|---|
| Alloy N06625 | 1 | 0.015 | 0.50 | 0.040 | 0.40 | 0.40 | 20 – 23 | 8 – 10 | 5 |
Mechanical Properties of ASTM Alloy F468 UNS N06625 Threaded Rod
| Alloy | Full Size Tests B | Machined Specimen Tests | |||
|---|---|---|---|---|---|
| Tensile Strength, (min.), ksi | Yield Strength, (min.), ksi | Yield Strength, (min.), ksi | Tensile Strength, (min.), ksi | Elongation in 4D, (min.) % | |
| ASTM F468 UNS N06625 | 120 | 60 | 60 | 120 | 30 |
How does Inconel 625 Bolt perform when exposed to high-temperature oxidation environments ?
Premier ASTM F468 UNS N06625 Bolts Supplier in UAE of higher quality bolts engineered for with reliability & superior resistance.
Nickel Alloy 625 Round Head Bolts Equivalent Standards
| Grade | Standard | |||
|---|---|---|---|---|
| ASTM | British | UNS | European (WNR) | |
| Alloy 625 | F468 | BS 3076 NA 21 | N06625 | 2.4856 |
Trade Names for ASTM F468 625 Inconel Stud Bolt
- Chornin® 625
- Altemp® 625
Know Our Distribution Network
| Ras Al Khaimah | Dubai |
| Umm Al Quwain | Abu Dhabi |
Table of Content