BX 156 Ring Gasket

BX 156 Ring Gasket

For elevated pressure conditions, industrial standards are recommended for choosing Bx156 ring gaskets.

  • It is mainly because they can withstand pressure conditions being as high as 20,000 psi.
  • The main aim to achieve by using Bx156 oval ring joint gasket is to ensure that it delivers leak proof performance.
  • Mainly available in three forms: CS (Carbon Steel), SS 316(Stainless steel 316) and coating of rubber.

With that said, for covering wider use case:

  • BX 156 gasket is available, with the flange size of 7 1/6″.
  • The pressure rating for the same is 10,000/15,000 and 20,000 psi.

Verified Supplier

Verified stockists and wholesalers

KNPC-approved Bx156 Oval Ring Joint Gasket suppliers in UAE

Specification of BX 156 Ring Gasket

Flange size BX 156 Ring Gasket thickness BX 156 Gasket applications
  • 7 1/16 inch
  • 3mm
  • 4mm
  • 1mm
  • 1.5mm
  • 2mm
  • 10mm
  • 12mm
  • 5mm
  • 6mm
  • 8mm

Contact directly to listed Bx 156 ring gasket supplier for available sizes and thickness

  • Pharmaceutical sector
  • Beverage
  • Oil & Gas companies
  • Brewing
  • Biotech
  • Sanitary pipe lines
  • Power generations
  • Dairy
  • Food processing
Manufacturing Standard Pressure rating API 6A BX 156 ring gasket face
  • PN/DIN (European)
  • KS (Korean)
  • BS10 (British/ Australian)
  • JIS (Japanese)
  • ASA/ANSI (USA)
  • 5,000 lbs to 20,000 lbs.
  • Full-Face
  • IBC
Tolerances Temperature range Bx156 Oval Ring Joint Gasket Material
  • Width of Ring : +0.20
  • Height of Ring : +0.20
  • OD : -0.15
  • Hole Size : 0.12
  • Stainless Steel 304: -200°C to 460°C
  • Soft Iron : -100°C to 500°C
  • Stainless Steel 316 : -200°C to 420°C
  • Urethane : -30°C to 110°C
  • Low Carbon Steel : -100°C to 500°C
  • Stainless steel
  • Urethane
  • Low carbon steel
  • Soft iron
Identification mark of BX 156 gasket Hardness Angle of sealing face 23°
  • Low Carbon Steel : S
  • 316 SS : S 316
  • BRINELL (Low Carbon Steel) : 120
  • BRINELL (316 SS) : 160
  • ±1/4°

Buy the BX 156 gasket online and save the price, check additional details of BX 156 ring groove dimensions & hardness as per ASME B16.20

Features

Other than high pressure tolerance, there are many other features linked to BX 156 ring groove

  • The pitch diameter of the flange is slightly smaller than the pitch diameter of the chosen gasket.
  • This diameter factor, account for the primary seal to be forces on its outer angles.
  • With that said, the inside angles with secondary seal are also forced.
  • These above mentioned two points are achieved only when the torque setting is applied when bolted the flange downwards.
  • Another beneficial feature that it offers is that it cannot be reused or interchangeable.
  • If you are looking out for API 6A BX 156 ring gasket, to be worked with hubs of 16BX and flanges of 6BX, it is a perfect choice.

Check ring gasket BX 156 industrial uses and heatproof process, get connected with trusted API 6A BX 156 ring gasket importer in Middle East countries

Material and temperature

Varying temperature is seen for the chosen material for ring joint gasket BX-156. Wondering how? Below table would clear out all your queries.

Material

Temperature range (in °F)

Low carbon -40 to 932
Soft Iron -40 to 932
SS 316 -148 to 1022
Now no need to pay more, meet seal ring joint gasket BX-156 manufacturers in Dubai and enjoy factory prices, applications of ring gasket BX-156 SS 316

Technical aspects for customers on measurement

It is not going to charge customers, if they check for more technical aspects for choosing ring gasket BX-156 SS 316. The main feature that they can also check is the measuring aspects too.

  • Equipment such Keyence CMM and Zeiss O-machine, check for the technology related to the contact and optical measurements. But keep in mind that it is a comprehensive analysis.
  • Adding to this, the above mentioned O-machine, constitute coordinate measuring multi-sensor.
  • These factors are followed as per the sample size quantities AQL 2.5 lvl 1 and 2.
  • For the moulded parts, RMA A2 tolerance is what they are manufactured to.
List of genuine BX156 octa & oval ring joint gasket stockist, find here the outer surface of titan BX 156 ring gasket

Customer tips

Always keep a check on the most crucial factors before opting to choose BX 156 oval ring joint gaskets.
Wondering why? It is these below mentioned two factors that can also suffice customers for the genuineness of products too.

  • For ordering chosen gasket, the suppliers must equip you with a QC document (either inn paper or digital form).
  • This document comprises information such as OD (Outer Diameter), ID(Inner Diameter), angles, height and other aspects of dimensions.
  • Demand for MTR certification, as it includes batch number, dates of cure and other set of mechanical aspects linked to chosen gasket.