Different Carbon Steel valves Symbols

Ball Valve

Butterfly Valve

Gate Valve

Globe Valve

Check Valve

Control Valve

Non Return Valve

Diaphragm Valve

Needle Valve
Talk to multiple trusted Carbon steel Gate Valve suppliers and buy CS Globe Valve and floating ball valve at factory price
Carbon Steel Valves Price
SIZE |
Grade |
Globe Valve |
Gate Valve |
Check Valve |
15MM |
A105 |
7.96 |
8.50 |
6.20 |
20MM |
A105 |
8.56 |
9.17 |
6.74 |
25MM |
A105 |
11.97 |
12.94 |
9.17 |
40MM |
A105 |
23.93 |
25.81 |
18.77 |
Carbon Steel Ball Valves Specification

Pressure
ANSI Class: 150 thru 2500
PSI/WOG: 200 thru 6000
Connection
BSP, BSPT, NPT, Flanged, Welded
Standards
ANSI B 16.1 (End flange), ANSI B 16.10 (face to face), ISO 5211 (Top flange)
Certificates
ISO9001, CE, NSF, TS, WRAS
Carbon steel Check Valve supplier in UAE, CS swing check valve, foot valve plug valve, & diaphragm valve in manual, pneumatic & electric
Types of ASTM A350 LF2 Valves

ASTM A350 LF2 Nuclear Valve

Carbon Steel Pinch Valve

CS Pressure Seal Valve

ASTM A350 LF2 Safety Valve

CS Strainer Valve

CS Balancing Valve

Carbon Steel Tank Cock Valve

Carbon Steel valves

CS Pressure Reducing Valve

CS Fusible Plug Valve

Carbon steel Blow Down Valve

Carbon steel Air Vent Valve

Carbon Steel Moisture Separators

Carbon Steel Air Valve

ASTM A350 LF2 Knife Valve

CS Foot Valve

Carbon Steel Float Valve

Carbon Steel Cryogenic Valve
Carbon Steel Butterfly Valve Chemical Composition

Buy Carbon steel Needle Valve as per ISA, ISO, British & American Standards
Carbon Steel Valve Standards
The carbon steel valves are manufactured as per below standards
- British Standards
- American Standards
Mechanical Properties of CS Globe Valve

A350 LF2 Control Valve Equivalent Grade

Carbon steel Butterfly Valve available in many end connections such as buttweld or socket weld, flanged or threaded
Carbon steel Butterfly Valve Connections
Carbon Steel Valves Application Industries
- Pharmaceutical
- Specialty Chemicals
- Petrochemicals
- Gas Processing
- Chemical Equipment
- Condensers
- Heat Exchangers
- Off-Shore Oil Drilling Companies
- Pharmaceutical Equipment
- Pulp and Paper Industry
- Power Generation
- Sea Water Equipment
Check the nearest port in the Middle East
- Mina Rashid (AEDXB)
- Port of Ras Al Khaimah (AERKT)
- Musaffah Port (AEAMF)
- Port Khalifa (AEKHL)
- Mina Al Hamriyah (AEHAM)
- Port of Fujairah (AEFJR)
- Port Jebel Ali (AEJEA)
- Port of Khor Al Fakkan (AEKLF)
- Port Khalid (AEKHL)
- Mina Zayed (AEMZD)
Difference between carbon steel ball valve and gate valve
Both the ball and gate valves are flow control devices that help to control the flow of liquid or gas.
The difference lies in their operation procedure. The carbon steel ball valve has a ball that rotates with the bore present in it at 90 degrees to open or close the valve. The carbon steel gate valve comes with a solid disk that moves up and down for opening/closing the valve.
Difference between Linear, Rotary & Quarter Motion CS Valve
The linear cs valve comes with a sliding stem design which pushes a closure element to an open or closed position.
In the rotary cs valve, rotation of passages takes place in a transverse plug which regulates the liquid or gas flow through the pipe attached.
For quarter motion cs valve, they are operated by giving the stem of the valve a 90-degree turn clockwise or anticlockwise.
Thus, the primary difference between the three types of valves lies in their operating procedure.
How to recognize a defective carbon steel flanged ball valve?
To recognize a defective carbon steel flanged ball valve, its soft seat should be checked. It can get damaged due to high pressure drop across the ball, causing it to get locked.
What is PSI in a carbon steel globe valve and how is it calculated?
The psi measures the pressure of gas, liquid, etc., pounds per square inch of the inside of the Carbon steel Globe Valve.
How to choose the right carbon steel butterfly valve?
In order to choose the right carbon steel butterfly valve, it is essential to understand its pros and cons.
The butterfly valve can be used in applications that require:
- Quarter turn and open port.
- Use in a wide range of chemical or corrosive media.
- It has low pressure drop and high pressure recovery.
- It is compact, lightweight, and available in larger sizes.
The cons of the valve are:
- It is difficult to clean
- Cannot deal with slurries
- The throttling is limited to a low differential pressure
- There is a high potential for cavitation and choke
- It has unguided disc movements which gets affected by the flow turbulence.
Check other grades for best price
Table of Content