What is a Class 2500 Flange?
Pipe flanges are made for various purposes. One of the important purposes is to reduce the effort to make connections. Flanges are fitted with bolts and nuts mostly. The flanges, therefore, have the advantage of being fitted and removed as and when required. However, the flanges have to withstand the pressure and the working temperature of the application. The flanges can be made under different pressure classes designated by the ASME B16.5 specifications. The 2500# Socket Weld flanges is made up of the highest pressure class in that specification.
Class 2500 Flange dimensions, pressure rating, weight and specification
Check ASME b16.5 2500 lb weld neck flange dimension in mm
What is the purpose of a Asme B16.5 Class 2500 Flange in refinery & petrochemical industry?
ASA 2500 Threaded flanges has a pressure capacity above 4000 psi at 600° F. This pressure capacity makes the flanges to be used at the highest pressure conditions in oil and gas industrial applications. There are different parts of the system that operate at different pressure and temperature ranges. The class 2500 carbon steel flanges can be used at high-pressure requirement parts.
Buy ANSI 2500 threaded flange from manufacturers who stand with you before, during, and after purchase, check ASME b16.5 cl 2500 blind flange dimensions in mm
What’s the highest temperature that a Class 2500 Rtj Flange can withstand?
The Class 2500 flange can withstand a high temperature of up to 500° Celsius. At the highest temperature, the class 2500 slip on flanges or any other flanges of this pressure class can withstand only up to 97.9 bars of pressure. The pressure capacity of the flanges decreases with increasing temperatures.
Negotiate price from 2500# socket weld flange suppliers, check ASA 2500 forged flange pressure rating, dimension chart, price per kg in Dubai
Why Class 2500 Blind Flange used in pipeline?
CL2500 Lap Joint flanges is used in two pieces; the lap joint ring and the stub end. It is applied in places where the pipes are larger and a connection alignment is difficult. The class 2500 weld neck flanges is made to be connected with other fittings well with a stronghold. The blind flanges is used to close a line completely. However, it is not a permanent closure, because the blind flanges can be fitted with bolts and nuts, and then the bolts and nuts can be removed when the flange is needed to be removed.
Get a price quote from trustworthy manufacturers of carbon steel 2500 lap joint flange in the middle east and Africa.
Advantages and Features of Ansi B16.5 Class 2500 Flange
The flanges range in nominal sizes ½ to 12 corresponding to 5.25 inches to 30 inches. The class 2500 ms flanges has wall thicknesses ranging from 1.19 inches to 7.25 inches. This is a class of flanges that can withstand very heavy pressure and temperature. Using this class of flanges will make your applications stronger, and will avoid unnecessary breakdowns in your pipelines.
Stainless steel 2500 RTJ flange and ASME b16.5 cl 2500 long weld neck flange for high-pressure service
Is 2500 Rtj Flange more corrosion resistant?
The corrosion resistance and the pressure ratings do not have any direct correlation. They are two different features of the class 2500 blind flanges and any other type of flanges in the same class. The corrosion-resistant depends on the quality of the material. Then, the outer and inner environment influence the corrosion resistance. The carbon steel material is generally corrosion resistant while the alloy steels are more corrosion resistant. The fluids with more acidity, oxidizing and reducing fluids, and other chemical agents can increase the corrosion.