Stainless steel & brass 45 deg npt elbow suppliers in UAE

What is a 45 degree Threaded Elbow?
Elbows are versatile fittings that make them a viable choice for different piping systems. An elbow 45 degree is used to connect equipment and change the direction of the flow at a 45 degree angle. The 45 degree threaded elbow has threads that allow for easy connection. These elbows are seen in lower pressure applications and are available at reasonable prices. The unique 45 degree threaded elbow dimensions allow them to be used in water supply, food industrial lines, chemical systems, agricultural systems, etc.
The stainless steel 45 degree threaded elbow has excellent corrosion resistance properties. These elbows reduce pressure drop and have less friction. Carbon steel 45 degree threaded elbow has a higher content of carbon that gives them good strength and moderate tolerances. The 45 degree threaded copper elbow is prone to cracking when exposed to elevated pressure and temperature conditions. The versatile brass 45 degree elbow threaded is cheaper and doesn’t require any high end gadgets to affix them in place.
Difference between sae and npt thread in 45 degree npt elbow
The 1 npt 45 degree elbow is a taper thread that can self-seal without requiring additional material. A sae 45 degree has a straight thread and requires additional O ring gaskets to seal it. The 1/4 npt 45 degree elbow has threads at a 60 degrees angle, while SAE threads have a 45 degree angle.
What is the pressure rating of 6000 lb 45 degree npt elbow?
A 45 degree npt elbow is rated to withstand pressures up to 900psi.
What is the pressure rating of Npt 45 Degree Elbow?
The Npt brass 45 degree elbow threaded has a pressure rating of up to 1378 bar.
45 degree Threaded Elbow Specification

Check 45 degree npt elbow dimensions, weight, size chart and price per kg in Dubai
Price list of 45 Deg Screwed Elbow
45 degree Threaded Elbow Price Per Piece |
45 Deg Screwed Elbow Price in USD |
45 Deg Threaded Elbow Price in UAE Dirham |
3/8 inch 2000# Forged Carbon Steel 45 Degree Elbow NPT Threaded Per Piece |
US $ 11.99 |
UAE Dirham 44.04 |
1-1/2 inch Ductile Iron 45 Degree Elbow NPT Threaded UL/FM Class 300 Per piece |
US $ 33.15 |
UAE Dirham 121.76 |
2 inch NPT Threaded 45 Degree Elbow 150# Malleable Iron Galvanized Per Piece |
US $ 19.28 |
UAE Dirham 70.82 |
3/4 inch 316 Stainless Steel 45 Degree Elbow – 150# NPT Threaded Per Piece |
US $ 10.65 |
UAE Dirham 39.12 |
3/8 inch NPT Threaded 45 Degree Elbow – Brass Per Piece |
US $ 4.79 |
UAE Dirham 17.59 |
Please note: The price may vary as per the location, you may contact the verified manufacturers & suppliers listed on this page.
Various Types of 45 Degree Threaded Elbow

45 Degree Threaded Elbow

45 Degree Npt Elbow

45 Degree Screwed Elbow

Female Threaded Elbow

Male Threaded Elbow

45 Deg Threaded Elbow Fitting

Bspt Elbow

Long Radius Threaded Elbow

Threaded Reducing Elbow

Threaded Copper Elbow

1 Inch Threaded Copper Elbow

Stainless steel 45 Degree Threaded Elbow
Stainless steel 45 degree threaded elbow in sae and npt thread as per ASME B16.11
Dimensions of Class 2000 Threaded 45 Deg Elbow


3000# Threaded Elbow Fitting Dimensions

6000 LB 45 Degree Threaded Elbow Dimensions

Brass 45 degree elbow threaded and 45 degree threaded copper elbow for noncritical applications in Middle East
Applications of Bspt Elbow
- Water supply
- Food industrial pipelines
- Chemical pipelines
- Petroleum Industry
- Oil and Gas Industry
Without middleman your direct purchasing of carbon steel 45 degree threaded elbow can save your 30%-40% cost in Dubai
Things to consider while buying Threaded Reducing Elbow
When purchasing 45 degree elbows in bulk, buyers should always consider certain features such as high pressure, impulse, vibration, vacuum, and temperature to ensure maximum reliability.
- There should be no pipe furring on these.
- High temperature resistance
- Economical
- It should be simple to set up.
- Should be extremely powerful.
- Excellent conclusion
- The elbow has a long lifespan.
- Installation that is dependable
- Resistance should be reduced.
- Resistance to corrosion
- It should be easy to transport and handle.
- Noise reduction
45 Deg Screwed Elbow Material
Stainless Steel 45 Degree Threaded Elbow
Pressure Class: 3000#, 6000# 9000#
Grades:
- 304
- 304L
- 316
- 316L
- 317
- 317L
- 310
- 321
- 347
- 347H
- 904L
ASTM Standard: ASTM A182
ASME Standard: ASME SA182
Mainly used in: Chemical Industry, Petroleum Industry
Duplex / Super Duplex 45 Degree Npt Elbow
Pressure Class: 3000#, 6000# 9000#
Grades:
- Duplex 2205
- Super Duplex 2507
- F51
- F53
- F55
- UNS S31803
- UNS S32205
- UNS S32550
- UNS S32750
- UNS S32760
- UNS S32950
ASTM Standard: ASTM A182
ASME Standard: ASME SA182
Mainly used in: Domestic water, Cement Industries
Carbon Steel Threaded Elbow
Pressure Class: 2000 / 3000 / 6000 LBS
Grades:
- A105
- A350 LF1
- A350 LF2 CL1/CL2
- A350 LF3 CL1/CL2
- A694 F42
- A694 F46
- A694 F48
- A694 F50
- A694 F52
- A694 F56
- A694 F60
- A694 F65
- A694 F70
ASTM Standard: ASTM A105 / A350 LF2 / A694
ASME Standard: ASME SA105 / SA350 LF2 / SA694
Mainly used in: Energy Industry, Refining Industry
Alloy Steel Female Threaded Elbow
Pressure Class: 2000 / 3000 / 6000 LBS
Grades:
- A182 F1
- A182 F5
- A182 F9
- A182 F11
- A182 F12
- A182 F22
- A182 F91
- A182 F92
ASTM Standard: ASTM A182
ASME Standard: ASME SA182
Mainly used in: Pulp & Paper Indusry, Power Plant Industry
Copper Nickel Male Threaded Elbow
Pressure Class: 2000 / 3000 / 6000 LBS
Grades:
- Copper Nickel 90/10
- Copper Nickel 70/30
ASTM Standard: ASTM B467
ASME Standard: ASME SB467
Mainly used in: Oil and Gas Industry, Chemical Industry
Nickel Alloy Threaded Elbow Fitting
Pressure Class: 2000 / 3000 / 6000 LBS
Grades:
- NICKEL 200
- NICKEL 201
- MONEL 400
- MONEL K500
- INCONEL 600
- INCONEL 601
- INCONEL 625
- INCOLOY 800
- INCOLOY 800H
- INCOLOY 825
- HASTELLOY C22
- HASTELLOY C276
- HASTELLOY B2
ASTM Standard: ASTM B564
ASME Standard: ASME SB564
Mainly used in: Paper Industries, Aerospace Industry
Table of Content