Threaded Plug

Stainless steel hex head plug and threaded pipe plug suppliers in UAE

Threaded Plug

The hex head plugs can be manufactured using different material types. This includes stainless steel, brass, copper, carbon, stainless steel, and so on. A stainless steel hex head plug has a superior chemical composition that allows them to have outstanding corrosion and oxidation resistance. A carbon steel threaded plug has a higher carbon content but is slightly weaker and prone to corrosive environments. The robust copper threaded plug is highly ductile and can handle a range of pressure and temperature conditions. Finally, the versatile brass threaded hex plug exhibits enhanced strength and optimum performance.

Difference between BSPP plug NPT plugs? Can you tap BSP to NPT?

A BSPP brass threaded hex plug is a parallel thread fitting. It makes use of a bonded ring to seal the sealing. The BSPP fitting has a longer male thread and a copper washer is squeezed in it. An NPT threaded pipe plug has a male adapter that wedges into the female thread. They seal easily due to the roundness principle.

You cannot tap an npt pipe plug with a BSP pipe plug. This is because NPT threads have threads with pointy peaks and valleys at an angle of 60 degrees. A BSP threaded hex head plug has threads that are round at a 55 degree angle.

How can you identify a thread type?

Threads are divided into six main types. This includes NPT/NPTF, metric parallel, UN/UNF, BSPT (BSP, tapered), BSPP (BSP, parallel) and metric tapered. You will need two instruments to start off. A pitch gauge to find the distance between the crests of threads and a caliper to measure its diameter.

The first step is to find tapered and parallel threads by looking at the diameter of the thread. NPT/NPTF, BSPT, and tapered metric pipe plug are tapered. UN/UNF, BSPP, and metric parallel are parallel threaded. Next, determine the pitch of the thread and the thread size. Further, designate the thread as per industry standards.

Is R thread compatible with G thread?

A male R thread can be screwed into an R and G thread. The Male G thread in metric threaded plugs is only screwed into a female G thread.


Verified Supplier

Verified stockists and suppliers

available 7 cars

What is a Threaded Plug?

A threaded plug is a fitting that is inserted at the end of the pipeline. These plugs help in terminating the flow of media in the system. The round head plug provides protection to different pipes and other equipment from corrosion and damage. The versatile square head plug has a versatile single piece design and is easy to install and dismantle when the time is right. The threaded hex plug is an easy and cost effective to plug your pipe.

Hexagonal Plug Specification

Threaded plug specifications

Choose correct carbon steel threaded plug thread type & pitch size to ensure a tight connection, check copper threaded plug & round head plug price list in Dubai

Price list of Threaded Plug

Hex Head Plug Price Per Piece Screwed Plug Price in USD Threaded Plug Price in UAE Dirham
3/8 in. Hex Head Plug Steel Per Piece US $ 1.0 UAE Dirham 3.67
1/8 inch Hex Head Plug – NPT Threaded 150# 316 Stainless Steel Per piece US $ 2.35 UAE Dirham 8.63
1/2 inch 3000# Forged Carbon Steel Hex Head Plug NPT Threaded Per Piece US $ 1.64 UAE Dirham 6.02
1 inch Hex Head Plug, NPTF Threads, 1000 PSI Max, Brass Per Piece US $ 12.98 UAE Dirham 47.68
1/4 inch Hex Socket Plug – NPT Threaded 150# 316 Stainless Steel Per Piece US $ 5.43 UAE Dirham 19.94

NPT pipe plug and brass threaded hex plug with tapered/ parallel threads, check metric threaded plugs dimensions

Threaded Plug Dimensions

Hex Plug

Threaded hex plug dimensions

Square Head Plug

Stainless steel square head plug dimensions

Round Head Plug

Threaded round head plug dimensions

HS Code For Hexagonal Plug

HS Code 7318 (Hexagonal Plug, Threaded Plug)

Different Types of Pipe Threaded Plug

Aluminum Hex Plug

Aluminum Hex Plug

Pipe Threaded Plug

Pipe Threaded Plug

Hex Plug

Hex Plug

Galvanized Threaded Plug

Galvanized Threaded Plug

Npt Threaded Plug

Npt Threaded Plug

Hex Plug Asme B16.11

Hex Plug Asme B16.11

Stainless Steel Threaded Plug

Stainless Steel Threaded Plug

Male Threaded End Plug

Male Threaded End Plug

Din 908 Threaded Plug

Din 908 Threaded Plug

Hexagonal Plug

Hexagonal Plug

Female Threaded Plug

Female Threaded Plug

Square Head Threaded Plug

Square Head Threaded Plug

Hex Head Threaded Plug

Hex Head Threaded Plug

Threaded Plug

Threaded Plug

Brass Threaded Hex Plug

Brass Threaded Hex Plug

Tapered Threaded Plug

Tapered Threaded Plug

Aluminum Threaded Plug

Aluminum Threaded Plug

Brass Threaded Plug

Brass Threaded Plug

Carbon Steel Threaded Plug

Carbon Steel Threaded Plug

Copper Threaded Plug

Copper Threaded Plug

A105 Hex Head Plug

A105 Hex Head Plug

Is your existing supplier increasing prices? Find trustworthy & verified square head plug and brass threaded plug suppliers in UAE

Various Available Material of Hex Plug

Stainless Steel Threaded Plug

Pressure Class: 3000#, 6000# 9000#

Grades:

  • 304
  • 304L
  • 316
  • 316L
  • 317
  • 317L
  • 310
  • 321
  • 347
  • 347H
  • 904L

ASTM Standard: ASTM A182

ASME Standard: ASME SA182

Mainly used in: Chemical Industry, Petroleum Industry

Stainless Steel Threaded Plug
Duplex / Super Duplex Male Threaded End Plug

Duplex / Super Duplex Male Threaded End Plug

Pressure Class: 3000#, 6000# 9000#

Grades:

  • Duplex 2205
  • Super Duplex 2507
  • F51
  • F53
  • F55
  • UNS S31803
  • UNS S32205
  • UNS S32550
  • UNS S32750
  • UNS S32760
  • UNS S32950

ASTM Standard: ASTM A182

ASME Standard: ASME SA182

Mainly used in: Domestic water, Cement Industries

Carbon Steel Female Threaded Plug

Pressure Class: 2000 / 3000 / 6000 LBS

Grades:

  • A105
  • A350 LF1
  • A350 LF2 CL1/CL2
  • A350 LF3 CL1/CL2
  • A694 F42
  • A694 F46
  • A694 F48
  • A694 F50
  • A694 F52
  • A694 F56
  • A694 F60
  • A694 F65
  • A694 F70

ASTM Standard: ASTM A105 / A350 LF2 / A694

ASME Standard: ASME SA105 / SA350 LF2 / SA694

Mainly used in: Energy Industry, Refining Industry

Carbon Steel Female Threaded Plug
Alloy Steel Hex Head Threaded Plug

Alloy Steel Hex Head Threaded Plug

Pressure Class: 2000 / 3000 / 6000 LBS

Grades:

  • A182 F1
  • A182 F5
  • A182 F9
  • A182 F11
  • A182 F12
  • A182 F22
  • A182 F91
  • A182 F92

ASTM Standard: ASTM A182

ASME Standard: ASME SA182

Mainly used in: Pulp & Paper Indusry, Power Plant Industry

Copper Nickel Npt Threaded Plug

Pressure Class: 2000 / 3000 / 6000 LBS

Grades:

  • Copper Nickel 90/10
  • Copper Nickel 70/30

ASTM Standard: ASTM B467

ASME Standard: ASME SB467

Mainly used in: Oil and Gas Industry, Chemical Industry

Copper Nickel Npt Threaded Plug
Nickel Alloy Pipe Threaded Plug

Nickel Alloy Pipe Threaded Plug

Pressure Class: 2000 / 3000 / 6000 LBS

Grades:

  • NICKEL 200
  • NICKEL 201
  • MONEL 400
  • MONEL K500
  • INCONEL 600
  • INCONEL 601
  • INCONEL 625
  • INCOLOY 800
  • INCOLOY 800H
  • INCOLOY 825
  • HASTELLOY C22
  • HASTELLOY C276
  • HASTELLOY B2

ASTM Standard: ASTM B564

ASME Standard: ASME SB564

Mainly used in: Paper Industries, Aerospace Industry

When Should You Use A Threaded Pipe Plug?

Threaded pipe plugs are appropriate for the majority of pipe endstopping applications. They are convenient, long-lasting, and simple to install and remove using commonly available tools. Pipe plugs, on the other hand, require an internally threaded pipe, which is not always available.

What are pipe plugs used for?

Pipe Plugs are primarily used for the following purposes:

  • Obstructing/sealing the flow in the pipe Temporarily;
  • Looking for leaks in the pipe
  • Flow Bypass/Diverting the Flow

Threaded Pipe Plugs Vs Pipe Caps

Pipe plugs have male threads and are screwed into the end of a pipe internally. Pipe caps, on the other hand, have female threads and are screwed onto the outside of the pipe. Pipe plugs and pipe caps serve the same purpose; however, pipe plugs can be used in places where a cap over a pipe’s end is not possible.

Threaded hex head plug and metric pipe plug in R/ G Thread in Class 3000 / 6000 as per ASME B16.11

Manufacturing Standards of Female Threaded Plug

Common Female Threaded Plug standards include

  • ASME B16.11
  • ASME B16.14
  • DIN 906/158
  • JIS D2101

Available Finish of Npt Threaded Plug

  • Plain
  • Passivated
  • Black oxide
  • Zinc trivalent