Threaded Tee

Threaded equal tee and brass threaded tee suppliers in UAE

Threaded Tee

A threaded tee fitting is highly versatile and can connect different equipment without applying much torque. This 2 inch threaded tee can be easily dismantled and later attached, allowing room for maintenance or repair works. The 1 inch threaded tee is not fit for use in higher temperature and pressure conditions. They also have less strength than welded tees, but they are cheaper. They are available in 9000, 6000, and class 3000 threaded tee pressure classes.

How do you know if a thread is BSP or NPT of threaded tee fitting?

BSP and NPT are two standard threads of a carbon steel threaded tee. The NPT standard is designed having pointed peaks and valleys, while BSP threads are rounded. An NPT tee has threads at a 60 degrees angle, while a bsp tee fitting has a 55 degree angle.

What is stronger coarse or fine threads in stainless steel threaded tee?

A size to size stainless steel threaded tee is stronger than a coarse thread. This is both in terms of tension and shear strength. The coarse threads of stainless steel threaded reducing tee has more resistance to stripping and is very durable.

Difference between self-sealing and non-self-sealing threads of forged threaded tee

A forged threaded tee is manufactured via a forging process either as self-sealing or non-self-sealing threads. In the self-sealing threaded copper tee fittings, no additional fastener is required to attach the material. Here the fitting directly corresponds to the female threads. A non-self-sealing threaded copper tee requires additional material to affix them in the correct place for long periods. A self-sealing tee can become loose or dislodge over time in comparison to a non-self-sealing brass threaded tee.

What Is A Threaded Tee?

A threaded tee is a fitting designed as a T having three openings. Two of the openings act as outlets while one acts as the inlet section and can either be equal or reduced. The threaded equal tee allows for an even flow of liquids and gases to take place across all its three channels. In the threaded reducing tee one of the port sizes is decreased, reducing the flow of media in the channel.

Specification of Threaded Tee

Threaded tee specifications

Threaded Tee Symbol

Threaded Tee Symbol

Direct buy stainless steel threaded tee from manufacturers at the very best price in UAE, check bsp tee fitting price per kg in Dubai

Threaded Tee Fitting Price List

Threaded Tees Price Per Piece Screwed Tees Price in USD Threaded Tee Fitting Price in UAE Dirham
1/2″ Brass Female Screwed Tees Per Piece US $ 4.57 UAE Dirham 16.78
2½” BSP Screwed Tees Per piece US $ 27.76 UAE Dirham 101.95
T Shaped Thread 3 Way Equal Tees SS 304 1′ NPT Per Piece US $ 8.99 UAE Dirham 33.02
Screwed Equal Tees 3/4″ Female Thread Per Piece US $ 1.60 UAE Dirham 5.88
SS 304 Female Screwed Tees (FT) 25 x 1/2″ Per Piece US $ 2.69 UAE Dirham 9.88

Please note: The price may vary as per the location, you may contact the verified manufacturers & suppliers listed on this page.

Various Types of Steel Screwed Tee

Threaded Tees

Threaded Tees

Brass Screwed Tees

Brass Screwed Tees

3/4 Threaded Tees

3/4 Threaded Tees

Male Screwed Tees

Male Screwed Tees

Copper Threaded Tees

Copper Threaded Tees

Class 3000 Screwed Tees

Class 3000 Screwed Tees

Female Screwed Tees

Female Screwed Tees

Threaded Tees Fitting

Threaded Tees Fitting

Reducing Tees Screwed Fittings

Reducing Tees Screwed Fittings

Pipe Threaded Tees

Pipe Threaded Tees

Reducing Screwed Tees

Reducing Screwed Tees

Stainless Steel Threaded Reducing Tees

Stainless Steel Threaded Reducing Tees

Steel Screwed Tees

Steel Screwed Tees

Unequal Screwed Tees

Unequal Screwed Tees

Screwed Copper Tee Fittings

Screwed Copper Tee Fittings

Check threaded copper tee fittings and 2 inch threaded tee dimensions and weight chart, buy threaded tee fitting from verified suppliers in United Arab Emirates

Threaded Tee Dimensions

Threaded equal tee dimensions

Threaded Reducing Tee Dimensions

Reducing screwed tee dimensions

Screwed Reducing Tee Weight

Steel screwed tee weight chart

Features of Class 3000 Screwed Tee

  • A T-shaped pipe tee has three female openings.
  • Straight pipe tees with the same size openings are available.
  • Reducing pipe tees have one different size opening and two the same size openings.
  • A cross pipe tee has four female openings of equal size.
  • A wing pipe tee has lugs for attaching to a wall or stud.
  • Compression fittings are used on two or more ends of a compression pipe tee.

Reducing Threaded Tee Applications

  • Textile
  • Chemical processing
  • Petroleum
  • Industrial equipment
  • Automotive
  • Refining
  • Pulp/paper
Threaded copper tee and threaded reducing tee with NPT, BSPT, NPTF, and Metric Tapered

Available Types of Threads of Screwed Tee

  • Metric
  • NPT
  • NPTF
  • BSPT
Forged and class 3000 threaded tee as per BS 3799/ ASME B16.11 standard

Available Material of Threaded Tee

Stainless Steel

Pressure Class: 3000#, 6000# 9000#

Grades:

  • 304
  • 304L
  • 316
  • 316L
  • 317
  • 317L
  • 310
  • 321
  • 347
  • 347H
  • 904L

ASTM Standard: ASTM A182

ASME Standard: ASME SA182

Mainly used in: Chemical Industry, Petroleum Industry

Stainless Steel Threaded Tee
Duplex / Super Duplex Threaded Tee Fitting

Duplex / Super Duplex

Pressure Class: 3000#, 6000# 9000#

Grades:

  • Duplex 2205
  • Super Duplex 2507
  • F51
  • F53
  • F55
  • UNS S31803
  • UNS S32205
  • UNS S32550
  • UNS S32750
  • UNS S32760
  • UNS S32950

ASTM Standard: ASTM A182

ASME Standard: ASME SA182

Mainly used in: Domestic water, Cement Industries

Carbon Steel

Pressure Class: 2000 / 3000 / 6000 LBS

Grades:

  • A105
  • A350 LF1
  • A350 LF2 CL1/CL2
  • A350 LF3 CL1/CL2
  • A694 F42
  • A694 F46
  • A694 F48
  • A694 F50
  • A694 F52
  • A694 F56
  • A694 F60
  • A694 F65
  • A694 F70

ASTM Standard: ASTM A105 / A350 LF2 / A694

ASME Standard: ASME SA105 / SA350 LF2 / SA694

Mainly used in: Energy Industry, Refining Industry

Carbon Steel Threaded Reducing Tee
Alloy Steel Reducing Threaded Tee

Alloy Steel

Pressure Class: 2000 / 3000 / 6000 LBS

Grades:

  • A182 F1
  • A182 F5
  • A182 F9
  • A182 F11
  • A182 F12
  • A182 F22
  • A182 F91
  • A182 F92

ASTM Standard: ASTM A182

ASME Standard: ASME SA182

Mainly used in: Pulp & Paper Indusry, Power Plant Industry

Copper Nickel

Pressure Class: 2000 / 3000 / 6000 LBS

Grades:

  • Copper Nickel 90/10
  • Copper Nickel 70/30

ASTM Standard: ASTM B467

ASME Standard: ASME SB467

Mainly used in: Oil and Gas Industry, Chemical Industry

Copper Nickel Male Threaded Tee
Nickel Alloy Unequal Threaded Tee

Nickel Alloy

Pressure Class: 2000 / 3000 / 6000 LBS

Grades:

  • NICKEL 200
  • NICKEL 201
  • MONEL 400
  • MONEL K500
  • INCONEL 600
  • INCONEL 601
  • INCONEL 625
  • INCOLOY 800
  • INCOLOY 800H
  • INCOLOY 825
  • HASTELLOY C22
  • HASTELLOY C276
  • HASTELLOY B2

ASTM Standard: ASTM B564

ASME Standard: ASME SB564

Mainly used in: Paper Industries, Aerospace Industry