Din 2566 pn10 flange

DIN 2566 PN10 flange

A flange that is widely recommended for use case mainly because of their excellent pressure tolerance is DIN 2566 PN10 flanges. This is because they have specific nominal pressure rating up to 10 bars. Other than this, they are manufactured as per material standards DIN 2566.

DIN 2566 PN10 threaded flanges suppliers in UAE

There are cases where customers are charges heavily while they choose DIN 2566 pn10 threaded flanges. They are also assured minimal quality assurance. Wondering how to deal with it? There is one alternative for it; visit the listed suppliers at pipingmaterial.ae; where:

  • Customers are provided quality assured services by the suppliers; at affording and reasonable prices.
  • For getting retail prices for small amounts you would get contact credentials of suppliers at this B2B platform for free. So, customers can then place their demands accordingly.
  • Confused on the installation process and the use case? These suppliers are technically well equipped to provide you detailed information. This is done to eradicate any issues or confusions.
  • There are tons of solutions to the problems that the customer place at this platform. This is one of the reasons why they are prominent and well-known DIN 2566 PN10 flanges suppliers in UAE.

DIN 2566 PN10 flange specification

DIN 2566 PN10 Flange Specification

 

Type Sealing Face Number of holes
Threaded Flange RF 4 To 8
Standard Nominal pressure Size
DIN 2566 PN10 DN10 – DN2000
Process (DIN 2566 PN10 forged flange) Specification Material Specification Material (DIN 2566 PN10 plate flange)
  • Casting
  • Forged
  • Stamped
  • Plate
  • Nickel alloy: B564, Alloy 200, 201
  • Inconel: 600, 601, 601GC, 602CA, 603XL, 617, 625, 625LCF, 686, 690, 693, 706, 718, 718SPF, 725, 740H, X-750, 751, MA754, MA758, 783
  • Monel: 400, 401, 404, R-405, K-500, 502
  • Hastelloy: B, B-2, B-3, C, C-4, C-22, C-22HS, C-276, C-2000, G-3, G-30, G-35, N, S, W, X
  • Incoloy: 800, 800H, 800HT, 803, 825, 832, 864, 890, 903, 907, 908, 909, 925, 926, 945, 945X, MA956, A-286, 020, 028, DS, 330, 25-6HN, 27-7MO
  • Titanium : ASTM B381 F2, F3, F5, F12
  • Copper nickel (for sea water):
    • ASTM B151
    • Copper Nickel 90/10, CW352H, WL 2.1972, EEMUA 234/3-6, C70620, C7060T
    • CuNi 70/30
  • Stainless steel : A182 F304, F304L, F316, F316L, F316Ti, F310, F310S, F321, F321H, F347, F347H, F317L, F904L
  • Carbon steel :
    • ASME A181 CL 60, CL 70
    • ASME SA105
    • SA A694 Gr F42, F46, F52, F56, Gr. F60, Grade F65, F70
  • Alloy steel : ASTM A182 Gr F1, F5, F9, F11 (most selling grade), F12, F22, F91
  • Low temp carbon steel (LTCS): SA350 LF2, LF3 & LF6
  • Duplex & super duplex: ASTM A182 F44 (UNS S31254), F51 (UNS S31803), F53 (UNS S32750), F55 (UNS S32760), F60 (UNS S32205), F61 (UNS S32550)
  • Stainless steel : ASME SA240 F304, F304L, F316, F316L, F316Ti, F310, F310S, F321, F321H, F347, F347H, F317L, F904L
  • Low temp carbon steel (LTCS): ASME A516 Gr 70, Gr 65, Grade 60
  • Duplex & super duplex: ASME 240 F44 (UNS S31254), F51 (UNS S31803), F53 (UNS S32750), F55 (UNS S32760), F60 (UNS S32205), F61 (UNS S32550)
Get connected verified DIN 2566 PN10 flange suppliers, they offers Export Packaging Logistics
  • Quick Response within 24 Hours
  • Solution Treatment / Aging Treatment
  • Quotation with Valuable Data Sheet
  • Ship with MTC Acc. to EN 10204/3.1
  • Design / Modify Drawings for Free
  • Wooden Case
  • Plastic Bag
  • Or custom as required
  • By Air (for urgent demand)
  • By Sea

Buy DIN 2566 PN10 BSPT forged flanges as per international standards, check manufacturing methods, advantages, and disadvantages

One can get DIN 2566 PN10 BSPT forged flanges with it being manufactured from the below listed methods:

  • Forging
  • Casting
  • Cutting

Main advantage is seen from its excellent mechanical properties and corrosion resistance nature. Other than that, they cannot rust easily. One limitation comes on the cost factor. It is very expensive and if the involved forging process is improper, then the grain would be large or uneven.

Purchase DIN 2566 PN10 standards screwed flanges for a reasonable price in Sharjah, with top-notch customer service and prompt delivery in the entire middle east and Africa

One can get excellent quality for DIN 2566 PN10 standard screwed flanges with available surface finishing types. This is the only reason on why it delivers excellent strength characteristics. Below are the listed surface finishing types:

  • Spiral serrated finishing
  • Smooth
  • Concrete serrated
  • Cold water
Get connected with genuine and verified suppliers and buy DIN 2566 PN10 screwed flange 10% to 40% cheaper price

You can get the DIN 2566 PN10 screwed flanges within the size range of DN6-DN150. But there are cases where custom dimensions are also needed. In such cases, they can either approach to the suppliers for getting accurate price quotations. Be sure that the suppliers do not charge excessive pricing and even the dimensions are as per the material standard DIN 2566.

Stainless steel DIN 2566 PN10 threaded flanges and DIN 2566 PN10 threaded pipe flange with the hydro test, check dimension, pressure rating, and price per kg in Dubai

For ensuring accurate material characteristics, there are testing methods such as NDT, radioactive, eddy current testing, etc, for DIN 2566 PN10 threaded flanges. Other than this, even customers can involve themselves for checking performance and quality aspects. One famous testing method is hydrotesting. This method is not a compulsion. Wondering why is it famous? This is because it is demanded mainly by customers, to be sure at their part for the DIN 2566 PN10 threaded pipe flange to be genuine.

DIN 2566 PN10 flange dimensions

DIN 2566 PN10 Flange Dimensions

 

Temperature and pressure of DIN 2566 PN10 flange according to EN 1092-1

Temperature WNR 1.4541

(Stainless Steel 321)

WNR 1.4404

(Stainless Steel 316L)

WNR 1.4571

(Stainless Steel 316Ti)

WNR 1.4462

(2205 Duplex Stainless Steel)

WNR 1.4307

(Stainless Steel 304L)

Room Temperature in Celsius 10,0 (bar) 10,0 (bar) 10,0 (bar) 10,0 (bar) 10,0 (bar)
100 9,9 9,4 10,0 10,0 8,6
150 9,3 9,4 9,8 10,0 7,7
200 8,8 7,9 9,3 10,0 7,0
250 7,9 6,9 8,3 6,5
300 7,6 6,6 7,8 6,0
350 7,6 6,4 7,6 5,7
400 7,2 6,2 7,6 5,5
450 7,2 6,2 7,6 5,3
500 7,0 6,0 7,5 5,1
550 6,7* 7,4 4,3*
560 6,1* 7,4 4,0*
570 5,6* 7,3* 3,7*
580 5,1* 6,7* 3,4*
590 4,5* 6,0* 3,0*
600 4,0* 5,5* 2,8*

 

Estimated DIN 2566 PN10 flange import price and shipping time variations :

Qatar USA UK
Estimated Shipping 7 days 40-60 days 30 days
Extra cost 5% 5% 5%
France Italy Malaysia
Estimated Shipping 30 days 30 days 10 days
Extra cost 5% 5% 5%
Note: Get online price list from the verified DIN 2566 PN10 flange manufacturers, stockist and suppliers listed on pipingmaterial.ae