Din 2652 pn6 flange

DIN 2652 PN6 flange

A flange that is widely recommended for use case where pressure conditions is 6 bar is DIN 2562 PN6 flange. Adding to this, it follows material standards DIN 2652, which covers for the rings and loose flanges, for welding.

Din 2652 loose flanges and DIN 2652 PN6 stainless steel Lj flange suppliers in UAE

Excellent quality and quantity is assured for DIN 2652 PN6 loose flanges by the listed suppliers at pipingmaterial.ae. Here you would get:

  • Reasonable price quotations as per the standards set by the customers.
  • You would get only and only 100% trusted, listed and verified suppliers.
  • Need specific dimensions for DIN 2652 PN6 lj flange, then it is highly suggested to approach the suppliers directly. For this, the contact credentials are open for the customers accordingly.

Many customers have benefited from the effective services provided, making it one of the prominent and leading DIN 2652 PN6 stainless steel lj flange suppliers in UAE.

DIN 2652 PN6 flange specification table

DIN 2652 PN6 Flange Specification

 

Type Face Hole
Loose Flanges and Rings for Welding (Slip On Flanges and Plain Collars) Flat Fcae 4 To 20 hole
Standard Rated pressure Size
DIN 2652 PN6 DN10 – DN2000
Type of Manufacturing Process Material Specification Of (DIN 2652 PN6 forged flange) Specification Material Of (DIN 2652 PN6 plate flange)
  • Forged
  • Stamped
  • Plate
  • Casting
  • CU Ni (Copper nickel) (for sea water):
    • Copper nickel 70/30
    • ASME/ ASTM B151
    • Carbon steel :
      • SA105
      • ASME SA181 Class 60, and 70
      • ASTM A694 F42/46/52/56/60/65/70
    • Alloy Steel : ASME SA182 (most selling F1/5/9/11), F12, F22, F91
    • Copper Nickel 90/10, C7060T, EEMUA 234/3-6, WL 2.1972, CW352H, C70620
    • Stainless Steel (SS): ASTM A182 Grade F304, 304L, F316, 316L, F310, F310S, F316Ti, F317L, F321, 321H, F347, F347H, F904L
  • LTCS: ASTM A350 LF2/ LF3/ LF6
  • Hastelloy: C-276, C-2000, C, C-4, C-22, C-22HS, B-2, B, B-3, G-35, G-30, G-3, N, S, W, X
  • Titanium : ASTM B381 F2/ F3/ F5/ F12
  • Nickel alloy: ASME SB564 Ni 200/201
  • Duplex & Super duplex: F51 (UNS S31803), F44 (UNS S31254), F61 (UNS S32550), F60 (UNS S32205), ASME SA182 F53 (UNS S32750), F55 (UNS S32760),
  • Incoloy: Alloy 800, 800H, 800HT, 803, 825, 832, 908, A-286, 27-7MO, 864, 890, 903, 907, 028, 020, 945, 925, 926, 330, 25-6HN, DS, 909, 945X, MA956
  • Monel: Alloy 400/401, 404, R-405, 502, K-500
  • Inconel: 600, 601, 617, 625, 625LCF, 686, 690, 601GC, 602CA, 603XL, 693, 740H, MA754, 751, 725, 706, 718, 718SPF, MA758, 783, X-750
  • Super duplex & Duplex : ASTM A240 F44 (UNS S31254), F51 (UNS S31803), F53 (UNS S32750), F55 (UNS S32760), F60 (UNS S32205), F61 (UNS S32550)
  • Stainless Steel: ASTM A240 Grade F304/L, F310S, F316/L, F316Ti, F310, F317L, F347/H, F321/H, F904L
  • LTCS : ASTM A516 Gr 60/ 65/ 70
Meet genuine DIN 2652 PN6 flange suppliers in UAE who offers Export Packaging Logistics
  • Design / Modify Drawings for Free
  • Lowest price in UAE
  • Quick Response within 24 Hours
  • Aging Treatment / Solution Treatment
  • Quotation with Valuable Data Sheet
  • Ship with MTC Acc. to EN 10204/3.1
  • Wooden Case
  • Plastic Bag
  • Or custom as required
  • By Sea
  • By Air (for urgent demand)

Cut out all intermediaries and direct buy from manufacturers of DIN 2652 PN6 lap joint flange to save up to 40%

There are many benefits that one can grab by purchasing DIN 2652 PN6 lap joint flange. One of the most beneficial features comes from the material being affordable. It is not expensive. On the other hand, it is suited for use case where corrosion resistance is considered.

Most importantly, it is a material that requires penetration butt weld which is fully single.

Get connected with trusted and genuine DIN 2652 PN6 Sorf flange suppliers in Dubai, see the DIN 2652 PN6 lap joint flange price/ thickness chart in mm

As per the material standard DIN 2562, you would get the size range of NPS 1/2’’ – NPS 48’’.

Other than this, you even get this product manufactured as per casting, cutting and forging. The mode of manufacturing is also associated with good corrosion resisting properties too.

Check sizes and availability with several of the listed suppliers who can offer DIN 2652 PN6 carbon steel loose flange at dealer prices in the middle east and Asia

Despite being available within the specified size range, there are cases where availability and custom or specific dimensional standards for DIN 2652 PN6 carbon steel loose flange becomes a problem.

In such cases, one can look out for similar other materials, or alternative. The other way is by mentioning it to suppliers, who quote reasonable pricing as per material standards.

Buy DIN 2652 PN6 slip on flange from manufacturers who stand with you before, during, and after purchase, check Din 2652 lap joint flange price per kg in Bahrain

Other than checking for ideal use case for DIN 2652 PN6 slip on flange, it is also important to check for MTC and test results. Out of these, hydrotesting is well known for confirming performance characteristics.

This is the only test which is not a compulsion, but is still famous. Why so? As this test is demanded only by customers to be sure on the genuineness of DIN 2562 lap joint flanges.

DIN 2652 PN6 flange Dimensions

DIN 2652 PN6 Flange Dimensions

 

DIN 2652 PN6 flange temperature & Pressure classifications according to EN 1092-1

Temperature of DIN 2652 PN6 flange (SS 316L)
1.4404
(SS 304L)
1.4307
(SS 316Ti)
1.4571
(SS 321)
1.4541
(Duplex 2205/ UNS S31803)
1.4462
room temperature 6.0 (bars) 6.0 (bars) 6.0 (bars) 6.0 (bars) 6.0 (bars)
100ºC 5.6 5.1 6.0 5.9 6.0
150℃ 5.1 4.6 5.8 5.6 6.0
200ºC 4.7 4.2 5.6 5.3 6.0
250ºC 4.4 3.9 5.3 5.0 6.0
300ºC 4.1 3.6 5.0 4.7
350ºC 3.9 5.4 4.8 4.6
400ºC 3.8 3.3 4.6 4.4
450ºC 3.7 3.2 4.6 4.3
500ºC 3.6 3.1 4.5 4.2
550ºC 2.6* 4.4 4.0*
560ºC 2.4* 4.4 3.6*
570ºC 2.2* 4.4* 3.3*
580ºC 2.0* 4.0* 3.0*
590ºC 1.8* 3.6* 2.7*
600ºC 1.6* 3.3* 2.4*

 

Import price and shipping time variations for DIN 2652 PN6 flange :

Gabon Canada Mexico
Estimated Shipping 45-60 days 45 days 45 days
Extra cost 5% 5% 5%
Panama Costa Rica Puerto Rica
Estimated Shipping 45 days 45 days 45 days
Extra cost 5% 5% 5%
Note: Don’t forget to check latest price list from the verified DIN 2652 PN6 flange manufacturers, suppliers, and stockist listed on pipingmaterial.ae