Din 86029 pn10 hubbed slip on flanges

DIN 86029 PN10 hubbed slip on flanges

For industrial standards that aspire for a product, which can withstand nominal pressure of 10 bar, DIN 86029 PN10 hubbed slip on flange is highly recommended. It follows material standard 86029, for being an ideal use case for welding.

DIN 86029 PN10 carbon steel hubbed so flange suppliers in UAE

To get a good quality DIN 86029 carbon steel hubbed so flange, it is very important for customers to purchase it with assured quality, at cost effective alternatives.

Keeping this in mind, you would get it accordingly from the listed suppliers at pipingmaterial.ae. Here, most of the problems of customers are resolves; where:

  • Price quotations are made as per the requirements of the customers.
  • Worried on the mode of operation and their benefits? These suppliers are bagged with good experience for a long time. They assist customers with their personal suggestions to avoid any confusion.
  • Most importantly, these products are supplied by the suppliers, who are completely genuine, listed and verified.
  • What about getting DIN 86029 PN10 hubbed so flange, with custom or specific dimensions? Can I get it? For such cases, it is highly advised to approach the listed suppliers, where the contact credentials are open at this B2B platform for free of cost.

Many happy customers even recommend it to other about this platform and regard it to be one of the prominent DIN 86029 PN10 hubbed slip on flange supplier in UAE.

DIN 86029 PN10 hubbed slip on flanges specification

DIN 86029 PN10 Hubbed Slip On Flanges Specification

Standard Nominal pressure Size
DIN 86029 PN10 DN10 – DN2000
Type Surface treatment Connection type
Hubbed Slip-on Flange For Welding Anti-rust oil Flat face (FF)
Process Method Specification Material (DIN 86029 forged flange) Material Specification (DIN 86029 plate flange)
  • Stamped
  • Forged
  • Casting
  • Plate
  • Super duplex & duplex : ASME SA182 F53 (UNS S32750), F55 (UNS S32760), F44 (UNS S31254), F51 (UNS S31803), F60 (UNS S32205), F61 (UNS S32550)
  • Carbon steel :
    • ASME A105
    • SA181 CL 60, Class 70
    • ASTM A694 Grade F42, F46, F52, Gr. F56, F60, F65, F70
  • Stainless steel (SS) : ASME SA182 F304/304L, F316/316L, F316Ti, F310, F310S, F321/ 321H, F347/H, F317L, F904L
  • Alloy steel (AS) : F11, F12, F22, F91 (top most selling Gr) ASME SA182 Gr F1, F5, F9
  • Nickel alloy: B564, Alloy 200/201
  • Titanium (Ti) : ASTM B381 F2/3/5/12
  • LTCS (Low temp carbon steel): ASME SA350 LF2/ LF3 and LF6
  • Hastelloy: B, C-276, C-2000, G-3, B-2, C-22HS, G-30, G-35, N, S, W, X, B-3, C, C-4, C-22
  • Incoloy: 800, 800H, 800HT, 825, 832, 864, 890, 803, 903, 907, 908, A-286, 020, 330, 25-6HN, 27-7MO, 028, DS, 909, 925, 926, 945, 945X, MA956
  • Copper nickel (CU-Ni) (for sea water):
    • ASTM B151
    • CuNi 90/10, CW352H, WL 2.1972, C70620, C7060T, EEMUA 234/3-6
    • Copper Nickel 70/30
  • Inconel: 600, 601, 617, 625, 625LCF, 686, 690, 601GC, 602CA, 603XL, 693, 706, 718, 718SPF, 751, MA754, MA758, 783, 725, 740H, X-750
  • Monel: 400/401, K-500, 404, R-405, 502
  • Duplex & super duplex: ASTM/ ASME 240 F44 (UNS S31254), F53 (UNS S32750), F51 (UNS S31803), F60 (UNS S32205), F55 (UNS S32760), F61 (UNS S32550)
  • Stainless steel (SS): ASTM A240 F304/L, F316/L, F316Ti, F310, F310S, F321/H, F347/H, F317L, F904L
  • LTCS (Low temp carbon steel): ASTM A516 Grade 60/ 65/ 70
All listed DIN 86029 PN10 hubbed slip on flanges manufacturers at pipingmaterial.ae offers Export Packaging Logistics
  • Lowest price in UAE
  • Quotation with Valuable Data Sheet
  • Quick Response within 24 Hours
  • Ship with MTC Acc. to EN 10204/3.1
  • Design / Modify Drawings for Free
  • Solution Treatment / Aging Treatment
  • Wooden Case
  • Plastic Bag
  • Or custom as required
  • By Sea
  • By Air (for urgent demand)

 

Negotiate price from DIN 86029 PN10 flange manufatcurers, check DIN 86029 PN10 carbon steel Sorf flange dimensions, thickness chart, price per kg in Dubai

Ideally, you would get DIN 86029 PN10 carbon steel sorf flanges withing the size range of DN10-DN1000. Adding to this, the associated weight range lies between 0.56-119.7 kg.

This wide range of dimensional aspects provide large scale options for customers; to suffice their requirements.

Verified & genuine DIN 86029 PN10 hubbed slip on plate flanges stockists in Sharjah, contact for any size or quantity and get a free quote

Customers who choose DIN 86029 PN10 hubbed slip on plate flanges often face issues, for getting custom or specific dimensions and weight. For such cases, they can look for other alternatives material. Or they can even approach the suppliers and get price quotations for the dimensional aspects accordingly.

Make sure that the dimensional aspects are as per the material standards DIN 86029 and that the pricing is accurate, affording and reasonable.

Get connected with verified and audited DIN 86029 PN10 hubbed slip on plate flanges suppliers in Bahrain and buy DIN 86029 PN10 high hubbed so flanges at 10% to 40% cheaper price in the middle east and India

Customers out there mainly look for the benefits that DIN 86029 PN10 high hubbed slip on flanges offers, after being installed or put for use case.

It offers cost-friendly alternatives. But this cost factor also adds up on the basis of project location, country origin, and so on. Adding to this, if a customer is looking to purchase this product from suppliers in UAE, then shipping cost is included to transport DIN 86029 PN10 hubbed slip on plate flanges from Mina Rashid port to Trivandrum seaport.

Looking to switch suppliers? Obtain quotes of DIN 86029 PN10 carbon steel so flange and compare it with your current supplier’s revised cost

It is very essential for the customers to check for the working behaviour of DIN 86029 PN10 carbon steel so flange.

  • There are scenarios where a slip on flange with 14 inch diameter fails to deliver non-degraded performance. This is mainly because it did not involve integrated forging and casting as per DIN 86029.
  • On the other hand, this condition is mainly because of the fabrication and machining of ring insert of flanges, which comprised internal diameters which were large.
  • Another use case reveals on how DIN 86029 PN10 flange This is because of inadequate weld between the insert and the flange, losing its capability to withstand boiling pressure conditions.

Dimensions of DIN 86029 PN10 hubbed slip on flanges in MM


DIN 86029 PN10 Hubbed Slip On Flange Dimensions

Choose right material for DIN 86029 PN10 hubbed slip on flanges for piping connection

DIN 86029 PN10 hubbed slip on flanges (Grade) Pipe Fittings Nuts & Bolts Valve Pipes
ASTM A182 Alloy Steel Grade F1, F5, F9, F11, F12, F22, F91 SA234 Grade WP1, WP5, WP9, WP11, WP12, WP22, WP91 SA 194 Grade 2H & A193 Grade B7 ASME SA217 Grade WC1, WC6, WC9, C5, C12 A335 P1, P5, P9, P11, P12, P22, P91
ASTM A105 Carbon steel ASTM A234 WPB/ WPC/ WPA A194 Gr 2H & A193 Gr B7 SA216 Gr WCB SA106 Gr A/ B/ C
Low temperature carbon steel A350 Gr LF2, LF3 A420 carbon steel Gr WPL6, WPL 3 A194 Grade 7 & A320 Gr L7 A352 Gr. LCB, LC3 A333 Grade 6, Gr 3
EEMUA 234/3-6 EEMUA 234/7-13 90/10 Cu-ni Copper Nickel 70/30 EEMUA 234/1-2
ASME SA182 F304/ F316/ F321/ F321H/ F347 ASTM A403 WP304, WP316, WP321, WP321H, WP347 A194 Gr 8 & A193 Gr B8 ASTM A182 Grade F304, F316, F321, F321H, F347 A312 TP304, TP316, TP321, TP321H, TP347
DIN 86029 PN10 hubbed slip on flanges grade Pipe Fittings Nut & Bolt Valve Pipes

 

DIN 86029 PN10 hubbed slip on flanges temperature as per EN 1092-1

Temperature of DIN 86029 PN10 Hubbed Slip On Flanges (SUS 304L)
1.4307
(SUS 321)
1.4541
(SUS 316L)
1.4404
(SUS 316Ti)
1.4571
(UNS S31803/ Duplex 2205)
1.4462
Room Temperature in Celsius 10,0 bar 10,0 bar 10,0 bar 10,0 bar 10,0 bar
100 8,6 9,9 9,4 10,0 10,0
150 7,7 9,3 9,4 9,8 10,0
200 7,0 8,8 7,9 9,3 10,0
250 6,5 7,9 6,9 8,3
300 6,0 7,6 6,6 7,8
350 5,7 7,6 6,4 7,6
400 5,5 7,2 6,2 7,6
450 5,3 7,2 6,2 7,6
500 5,1 7,0 6,0 7,5
550 4,3* 6,7* 7,4
560 4,0* 6,1* 7,4
570 3,7* 5,6* 7,3*
580 3,4* 5,1* 6,7*
590 3,0* 4,5* 6,0*
600 2,8* 4,0* 5,5*

 

Import packaging and shipping time variations for DIN 86029 PN10 hubbed slip on flanges:

Egypt Turkey Libya
Estimated Shipping 18 days 21 days 45-60 days
Extra cost 5% 5% 5%
Nigeria Germany Poland
Estimated Shipping 30 days 20 days 45 days
Extra cost 5% 5% 5%
Note: Get online price list from the trusted DIN 86029 PN10 hubbed slip on flanges stockist, manufacturers and suppliers listed on pipingmaterial.ae