Ductile Iron Fittings

Get connected with genuine ductile iron fittings suppliers in UAE

 

What Is Ductile Iron Fitting?

 

Ductile iron fittings are an alloy of carbon, iron, and silicon alloy specification. The Ductile Iron Fittings are made with a group of materials that are produced with different properties to control their microstructure. Ductile Fitting are devices that are utilized to connect and influence the specifications of different piping equipment. The Di Fittings are designed in the form of elbows, tees, wyes, couplings, caps, adapters, bushings, unions, plugs, etc. The robust Ductile Iron Elbow Fittings are a common type of fitting. These elbows allow the directional change of the flow in the system. The Ductile Iron Pipe Wye Fittings are shaped in the form of a Y. These fitting allow for the efficient joining of one piping equipment with the other at an angle or degree. Zinc Coated Ductile Iron Fittings are used to transport gas, water, and liquid waste across different industrial and residential settings.

Verified manufacturers and stockists

What is Manufacturing Process Of Ductile Iron Pipe Fittings?

The ductile iron pipe fittings are manufactured with 90% recycled iron. The lost foam material is utilized to manufacture Di fittings using an advanced technique. In this method, a replica is made using thermocol that acts as a casting design pattern. Here, hot metal is poured into these replicas’ cavities. After the metal is cooled metal is taken out and cleaned. The material is subjected to different testing methods to check its quality. The fitting can be coated with different specifications as per requirements.

 

Ductile Iron Pipe Fittings Specification

• Specification : Ductile Iron Fittings
• Diameter : DN 80 To DN 1000 mm
• Standard : ISO2531/ BSEN545/ AWWAC151
• Connection Types : Flange Ends and Socket Ends
• Application : Raw water/ Pressure sewer/ Potable water
• Proof stress : 300MPA
• Hardness : ≤250HB

 

KNPC-approved di pipe fittings manufacturers in Dubai, buy ductile iron water fittings for custom sizes and factory prices in the middle east

 

Ductile Iron Fittings Price List

 

 

Check standards types of zinc-coated di fittings, also pay only for required sizes of ductile iron elbow fittings

 

Standards Types Of Gi Pipe Fittings

The standard Gi pipe fitting are ANSI/AWWA C150/A21.50, ANSI/AWWA C151/A21.51, ASTM A746, and ASTM A716. Di Pipe Fittings are also designed in ANSI/AWWA C110/A21.10, ANSI/AWWA C105/A21.5, ASTM A674, and ASTM A536. The Epoxy Coated Ductile Iron Fittings can be tested using ASTM G62 standards. The fitting are also available in different miscellaneous standards.

 

Joints Available:

 

Other product list

 

Various Types Of Ductile Fittings

 

 

Why Choice?

 

Talk to multiple trusted ductile iron pipe wye fittings importers in abu dhabi, also see ductile iron plain end fittings advantages/ dimensions/ weight chart

 

Advantages Of Di Fittings

The Di fittings have excellent features that display good hardness and enhanced wear resistance. Ductile Iron Pipe Fittings are easy to cast, machine and have an excellent strength-to-weight ratio. These fitting have exceptional toughness and are very reliable. The Ductile Iron Plain End Fittings have a much lower cost than that steel. These fitting

also showcase good corrosion resistance and have enhanced tensile and yield strengths. These 6 Inch Ductile Iron Fittings also showcase good electrical resistivity and fatigue strength.

 

Di Pipe Fittings Dimensions

Reducing Elbows

 

Ductile Iron Side Outlet Elbows Dimensions

 

Ductile Iron Long Radius Elbows Dimensions

 

How are Ductile Iron Water Pipe Fittings Made?

 

Ductile iron is primarily designed from crude oil that is produced as ore is smelted in the blast furnace. The Ductile Iron Water Pipe Fittings contain 90% of pig iron with a high carbon content. Its superior chemical properties make it stable in different systems. The pig metal is then melted using a blast furnace, and carbon is forced beyond its normal capacity. The Di Water Pipe Fittings have excess silicon, sulfur, and manganese that form the spherical graphite modules when the metal cools. This process helps create reliable and wear resistant Ductile Iron Hub Fitting. Your system performance and casting quality are improved if the material is formed with this process.

 

Products Types Of Di Fittings

 

Ductile Iron Fittings Weight Chart

Long Radius Elbow

 

Features of Ductile Iron Elbow Fittings

 

Bolts For Ductile Iron Hub Fittings

 

Find complete information about heat treatments of ductile fittings, call for 2 to 8 inch ductile iron flanged 90 deg elbow mill test reports

 

Use and Heat treatments of Ductile Iron Pipe Wye Fittings

Ductile Iron Wye fittings are generally heated and treated by normalizing, annealing, or stress relieving the material. The Ductile Iron Wye Fitting can also be quench hardened to produce a stronger and wear resistant material. The fitting are seen across different industries. It is common in plumbing systems for connecting different piping materials. These fitting are seen in the automotive industry, cylinders, truck axles, and other parts. Glass Lined Ductile Iron Fittings are also seen in piano harps, cable drums, machine frames, etc.

 

Ductile Iron Plain End Fittings Pressure Ratings

 

Maximum Size of Tapped Hole in Di Water Pipe Fittings