EN 10294-1 grade 20mnv6+n hollow bar

EN 10294-1 Grade 20MnV6+N Hollow Bar

Industrial applications aspire for EN 10294-1 grade 20MNV6+N hollow bar to suffice wide range of corrosion related scenarios.

This material shows good resistance to corrosion. Adding to this, they comprise lower contents of carbon.

Existing stockist proposes a price increase? Get connected with verified suppliers and buy EN 10294-1 grade 20mnv6+n hollow bar at cheapest possible price in UAE

Verified Supplier

Verified Suppliers

available 10 cars

Identify the top 10 carbon steel en 10294-1 20mnv6+n hollow pipe suppliers in UAE here. get the list and check the hardness

To get top notch and best quality standards for carbon steel EN 10294-1 grade 20MNV6+N hollow pipes, it is highly advised for you to approach the listed suppliers at pipingmaterial.ae. Here, you would get the assured quality for the products at a pricing, which are affording and only as per the standards that customers set.

Worried on product genuineness? It is completely taken care of by this B2B platform; as you would get to see only listed and genuine suppliers.

If custom dimensions are concerned, you can mention your demands accordingly. For this, the contact credentials are mentioned. These are the reasons why they are prominent and leading EN 10294-1 grade 20MNV6+N hollow bars suppliers in UAE.

Other than this, they even equip customers with the accurate data. For instance, this material shows hardness of RC 55.

EN 10294-1 Grade 20mnv6+N Hollow Bar Specification

EN 10294-1 Grade 20mnv6+N Hollow Bar Specification

Manufacturing size range Thickness Length
  • OD: 20-300mm
  • ID: 30-200mm
10-80mm 2000-12000 mm
Inspection of 20mnv6+N Hollow Bar Surface Manufacturing technique
  • Impact test
  • Visual and Dimensional control
  • Heat analysis
  • Tensile test
  • Electromagnetic test
  • Sand blasting finished
  • Polished
  • Bright
  • Hot rolled pickled
  • Forged
  • Hot rolled
  • Cold drawn
Material Grade Standard
Carbon steel Grade 20mnv6+N EN 10294-1
Finish Tensile Strength Hardness
  • Smooth turned
  • Centreless ground
  • Polished
  • Cold finished
  • Tensile Strength = 600 (MPa min)
Brinell: 180
Value Added Services Types Of EN 10294-1 Grade 20mnv6+N Hollow Bar Test Certificate
  • Tempering
  • Mechanical finishing
  • Annealing
  • Polishing & grinding
  • Forging mold blank
  • Cold extrusion molding
  • Recrystallization annealing
  • Mechanical rough machining
  • Blanking
  • Carburizing
  • Carbon steel EN 10294-1 20mnv6+n hollow pipe
  • Carbon steel EN 10294-1 gr 20mnv6+n hollow bar
  • 20mnv6+n hollow bar
  • 20mnv6+n steel hollow bars
  • 20mnv6+n hot rolled hollow bar
  • 20mnv6+n hollow bar
  • EN 10294-1 grade 20mnv6+n carbon steel seamless hollow bars
  • Third party inspection
  • MTC EN 1024 3.1/3.2
  • Manufacturer test certificate
  • Laboratory test report from government certified Lab
Heat Treatment Of 20MNV6+N Steel Hollow Bar Cutting techniques Applications
  • Annealed
  • Precipitation hardened
  • Hardened and tempered
  • Water-Jet
  • Laser
  • Burrless cuts
  • Sawing
  • Oil refineries
  • Petroleum
  • Petrochemical
  • Nuclear power plants

Receive top-notch customer service and affordable stockists of carbon steel en 10294-1 gr 20mnv6+n hollow bar in the Middle East; you can also compare 20mnv6+n hollow bar vs pipe here.

Only wall thickness of both the materials, is the only factor that separates them. When seen in ideal use case, 20MNV6+N carbon steel hollow bar has broader wall thickness, when compared to the pipes.

Hence, look at each dimensional aspects and then take decisions for purchasing this product.

To fulfill the requirements of your project, it is simple to get a variety of 20mnv6+n steel hollow bars in Dubai with standard finishes and certification. Check the advantages

EN 10294-1 grade 20MNV6+N hollow bar are manufactured as per the certification standards; such as MTC. This certificate is in compliance with EN 10204 type 3.1/3.2.

Other than this, this material is presented in varnished conditions, when dealing with surface finish as a factor. This resists rust formation over the surface. This is the only reason why it offers excellent resistance to corrosion.

Another benefit that can be seen from its use case comes from excellent strength characteristics.

Make contact with reliable 20mnv6+n hot rolled hollow bar importers in GCC nations and become knowledgeable about 20mnv6+n hollow bar quality.

You would get varied sizes for 20MNV6+N hot rolled hollow bar, with its outer diameter ranging between 30-600mm. This provides wider options for customers to choose their desired products accordingly. Make sure that these dimensional aspects meet material standards. If one demands specific dimensions, then it is advised to approach the suppliers who can quote accurate pricing for the same.

You can contrast the prices and turnaround times of various traders and distributors of en 10294-1 grade 20mnv6+n carbon steel seamless hollow bars on this page. Examine the test procedure.

It is very important for testing 20MNV6+N carbon steel seamless hollow bars to ensure its non-degrades performance. The best way of testing methods include: NDT, radiography, ultrasonic, eddy current testing and much more. These methods do not alter the physical aspects of the material and evaluate for the performance and quality of the product.

20mnv6+n steel hollow bars chemical composition and mechanical properties


EN 10294-1 Grade 20mnv6+N Hollow Bar Properties