EN 10294-1 grade e355 hollow bar

EN 10294-1 grade e355 hollow bar

When one chooses EN 10294-1 grade e355 hollow bar, appreciating performance are seen when put for ideal use case. This is because of their chemical composition, where they comprise carbon contents in adequate amounts.

The term E in E355 reflects upon the European standards that they follow, to deliver beneficial characteristics. Adding to this, 355 reflects to the yield strength of the material.

Verified Supplier

Verified Suppliers

available 10 cars

Compare EN 10294-1 grade e355 vs e275 and find a few verified carbon steel e355k2 seamless tube suppliers in UAE.

Unique characteristics are seen, when comparing the both for covering wide range of standards. The main difference is because of the yield strength which for grade E355 is 355 and 275 for E275.

To get such detailed aspects for what you aspire for, it is highly advisable to approach the listed suppliers at pipingmaterial.ae, if you want to choose e355k2 steel seamless tube. At this B2B platform, you would get only genuine suppliers offering reasonable and accurate price quotations. This is the only reason why they are well appreciated and renowned EN 10294-1 grade E355 hollow bar suppliers in UAE.

EN 10294-1 Grade E355 Hollow Bar Specification

EN 10294-1 Grade E355 Hollow Bar Specification

Size WT Available Length
(OD x ID): 30 x 20mm – 250 x 120mm 20-100mm 3000-14000 mm
EN Standard Product Material Grade
EN 10294-1
  • Low & high temperature carbon steel
  • Low & high temperature alloy steel
Grade E355
Applications Heat Treatment Finish
  • Petrochemical
  • Petroleum
  • Nuclear power plants
  • Oil refineries
  • Hardened and tempered
  • Annealed
  • Precipitation hardened
  • Cold finished
  • Smooth turned
  • Centreless ground
  • Polished
Different Types Of Cutting Techniques Roughness Tensile Properties
  • Burrless cuts
  • Sawing
  • Water-Jet
  • Laser
  • Ra0.2μm(max)
  • Tensile Strength = 490 (MPa min)
Inspection Checklist Surface Manufacturing Process
  • Visual and Dimensional control
  • Heat analysis
  • Impact test
  • Electromagnetic test
  • Tensile test
  • Bright
  • Sand blasting finished
  • Hot rolled pickled
  • Polished
  • Hot rolled
  • Forged
  • Cold drawn
Types Of EN 10294-1 Grade E355 Hollow Bar Test Certificate Value Added Services
  • Carbon steel E355k2 seamless tube
  • Carbon steel EN 10294-1 Gr E355 seamless hollow bars
  • E355k2 steel seamless tube
  • Carbon steel EN 10294-1 grade E355 hollow bar
  • Carbon steel EN 10294-1 grade E355k2 pipe
  • MTC EN 1024 3.1/3.2
  • Third party inspection
  • Laboratory test report from government certified Lab
  • Manufacturer test certificate
  • Forging mold blank
  • Cold extrusion molding
  • Mechanical rough machining
  • Blanking
  • Carburizing
  • Tempering
  • Mechanical finishing
  • Annealing
  • Polishing & grinding
  • Recrystallization annealing

Obtain truthful importers that provide carbon steel EN 10294-1 gr e355 seamless hollow bars with MTC at the lowest possible cost in Middle East countries. see application

It is also important to check for the certification standards that are associated with carbon steel EN 10294-1 alloy steel hollow bar. For this, MTC is highly recommended, which not only provides accurate information regarding the product, but also assure product genuineness.

These certifications are confirmed and in compliance with EN 10204 and as per 3.1 inspection. Based on this, it covers wide range of applications which include:

  • Oil and gas industries.
  • Piping system, for ensuring effective flow.
  • Structural applications.

Live-chatting with stockists of e355k2 steel seamless tube in Dubai could help you receive the most accurate estimate. check the advantages

You would see E355k2 steel seamless tube offering excellent machining characteristics. Adding to this, they also have enriched surface quality and have a high tolerance characteristic. Another benefit that is seen comes from the corrosion resistance ability of the material.

Here you will find only audited traders of carbon steel EN 10294-1 grade e355k2 pipe in GCC countries with necessary finishes, lengths, and diameters, know the wall thickness

EN 10294-1 grade E355K2 carbon steel pipe is available with wide range of dimensional aspects, providing wider choice options to an end user. On the basis of outer diameter, it ranges between 20-250mm and 10-40mm in wall thickness range. Adding to this, it comes with surface protection, which are oiled, or bare.

Are you having to search for distributors who will provide cut-to-size carbon steel EN 10294-1 grade e355 hollow bar stock for your project? here you can obtain what you need. see buying tips

There are scenarios where customers demand for custom dimensions for EN 10294-1 grade E355 carbon steel seamless hollow bars. In such cases, it is ideal for the customers to check for the dimensional aspects being in accordance or compliance with material standards. The other way can be by approaching only those manufacturers who quote reasonable pricing.

EN 10294-1 grade e355 hollow bar chemical composition and mechanical properties


EN 10294-1 Grade E355 Hollow Bar Properties