Get the lowest price from verified gi tee and galvanized reducer suppliers in UAE
What are galvanized pipe fittings?
Using a protective coating on the surface of Iron or steel increases its corrosion resistance. A type of coating used on Iron to enhance its rust resistance is galvanizing. The coating on galvanized pipe fittings are a protective layer of zinc. This layer forms a film over the fitting, preventing Iron from getting oxidized.
Galvanizing process of 4 way galvanized pipe fitting
The first step of galvanization is to degrease a fitting with a cleaning solution, followed by pickling in a heated vat of diluted sulfuric acid. Next, the Galvanized steel fittings are fluxed in an aqueous solution. After fluxing the fittings, they are immersed in a vat of molten zinc. This process is galvanization.
|Specification||Galvanized Pipe Fittings|
|Size||1/2″ to 16 inch|
|End Connection Type||Buttweld|
|Transportation In||Land and Ocean|
|Types||Elbow, Tees, Reducers, End Caps|
Oil and Gas
Looking for customized gi pipe bend and galvanized pipe cap manufacturers in Dubai? View galvanized fittings dimensions and price list per kg
View all other grades and their specialized manufacturers
2 1/2″, 45 Deg Elbow, Hot Dipped Galvanized, SCH 40, BUTTWELD
3/4 INCH, 90 Deg Elbow, Grade A123 Galvanised, SCH 40, ASME B16.9
DN 400X350, SCH XS, BW, Concentric Reducer
3 X 2″, Concentric Reducer, SCH 20
1 X 3/4 Inch, SCH 80, Reducing Tee
10 Inch, SCH 40, Long Radius Bend
Cold Galvanized Split Tee
Hot Dipped Galvanized Straight Tee
Hot-Dip Galvanizing Barred Tee
HDG Reducing Tee
Hot Dipped Galvanized Steel Equal Tee
Galv Lateral Tee
Gi Concentric Reducer
Galvanized Weld Eccentric Reducer
Galvanised Buttweld Pipe Bend
Hot-Dip Galvanizing Reducing Cross
ASTM A123 Hot Dip Stub End
Galvanized End Cap
Gi Steel Fittings
Gi Pipe Fittings
Galv Pipe Fittings
Gi Long Bend
Gi Cross Tee
2 Inch Galvanized Pipe Fittings
Galvanized Iron Pipe Fittings
Malleable Galvanized Fittings
Galvanized Handrail Fittings
Galvanized Steel Pipe Fittings
There are three advantages of galvanizing iron –
- 1. Longer shelf life – Treating these Malleable Galvanized Fittings by immersion in molten zinc, covers every surface area. Thus, protecting the material in its entirety, with little to no need for maintenance, and improving durability.
- 2.Low cost – It is possible to use the Galvanized Pipe Cap as is, making them affordable, without further treatments (e.g.- painting, coating, etc.)
- 3. Good rust resistance – The layer of zinc that coats the metal acts as a sacrificial layer when exposed to oxidative conditions. Even if the fittings are present in a high moisture environment, the layer of zinc will corrode, preventing corrosion of the Galvanized Gas Pipe Fittings.
|Normal Pipe Size In Inch||Class 3000 In mm||Class 6000 In mm|
Now Buy Specific Sizes At Best Price From Genuine Suppliers In Middle East Countries
United Arab Emirates
How Does Hot-Dipped Galvanized Tee Protect the Base Metal Underneath?
Galvanization could be carried out cold or hot. Yet, more preference is given to hot-treated coating because it is distributed on the surface of the fitting. Iron reacts with zinc upon immersion into the zinc bath, forming a metallurgical bond. When the Galvanized Tee Fitting is taken off the vat, the molten zinc reacts with oxygen, forming Zinc oxide. Further bonds are created between Zinc oxide and atmospheric carbon dioxide. This reaction forms a final protective layer of zinc carbonate on the fitting. Thus, ensuring adequate protection from rust.
|NPS In MM||Weight In Pounds|
Check to resist corrosion of gi pipe fittings, a wide selection of ASME b16.9 galv pipe fittings and hot galvanizing stub end in the middle east according to ASTM A123 grade 85/ g90
Do Gi Pipe Fittings Resist Corrosion?
The presence of moisture in the air corrodes non-coated iron fittings. The Gi Pipe Fittings will reach a point of failure if left unprotected. Treating the material with a layer of the coating protects the base by corroding the outer layer of zinc. So the fitting can perform its function despite the presence of humidity or moisture in the environment.
Manganese : 1.30
Carbon : 0.20
Talk to multiple trusted gi fittings suppliers in UAE, importers of ASTM d7803 galvanized tee and unequal cross in the United Arab Emirates
- Cold galvanizing with fine surface
- Hot galvanizing with rough surface
- More durable
Check the difference between standard iron and galvanized iron fittings, buy 4-way hot dip galvanized pipe fittings at affordable prices with the brinell hardness test
Galvanized Iron Fittings vs Standard Iron Fittings: What’s the Difference?
Both standard and galvanized fittings are the same as their metallurgy consists of iron. The main difference between them is that the latter has a coating of zinc on its entire surface area, giving it added protection from moisture.