Hastelloy threaded rod

Hastelloy Threaded Rod

Hastelloy threaded rod, as the name suggests is a metal rod that is threaded throughout its length. A Hastelloy Threaded Rod is also a stud that allows it to connect different equipment. These rods are affixed with two nuts at both ends. The Hastelloy Stud supports load-bearing and non-load bearing equipment. These studs have good resistance to corrosion and oxidation in the system. Hastelloy Alloy ACME Threaded Rod is imprinted with threads of different types. These rods work in variable pressure and temperature conditions. A Hastelloy Hollow Threaded Rod is tolerant to vibrations and stress. These rods are heat treated and can be custom designed as per requirements.

Verified Supplier

Verified manufacturers and stockists

available 8 cars

Hastelloy stud bolts suppliers in UAE

Hastelloy threaded rod specification


Hastelloy Threaded Rod Specifications

Hastelloy threaded rod sizes ASTM B574 stud bolt size chart Threaded rod length
  • Threaded rod diameter: 2-56 to 2″
  • 5 – 60mm
  • Double end stud bolts all thread: ¼” to 4″
  • Length: up to 61″
  • Fully threaded stud: ¼” to 2 ½”
  • Length: up to 61″
  • 1 meter
  • 2 meter
  • 3 meter
  • 3 feet
  • 6 feet
  • 10 feet
  • 12 feet
Grades ASTM standard Temperature range
  • Alloy C22 (UNS N06022/ 2.4602)
  • Hastelloy C276 (UNS N10276/ 2.4819)
  • Alloy B2 (UNS N10665/ 2.4617)
  • Hastelloy B (UNS N10001)
  • Hastelloy B-3
  • Hastelloy C
  • Alloy C4
  • Alloy C-2000 (UNS N06200/ 2.4675)
  • Alloy G-30 (UNS N06030/ 2.4603)
  • Alloy G-3 (UNS N06985)
  • Alloy G-35 (UNS N06035)
  • Hastelloy W (UNS N10004)
  • Hastelloy S (UNS N06635)
  • Hastelloy N (UNS N10003)
  • Hastelloy X (UNS N06002/ 2.4665)
  • SB 574/ ASTM B574 UNS N10276
  • SB 574/ ASTM B574 UNS N06022
  • Up to 1500°F /815°C
Thread class Hastelloy Stud bolt types Threaded rod types
  • Class 1A (Loose fit)
  • Class 2A (Medium fit)
  • Class 3A (Tight fit)
  • 5 CSF
  • 5 ONF
  • 5 HF
  • 2G
  • 3G
  • 4G
  • 6G
  • 8G
  • custom

Contact above hastelloy threaded rod suppliers & stockholders for large-diameter

  • Continuous threaded stud bolts
  • Hub studs
  • Double end stud bolts
  • Tap end stud bolts
  • UNC stud bolt
  • Blade studs
  • Knurled stud bolt
  • Welding studs
  • Fully threaded studs
  • Reduced shank stud bolts
  • Exhaust stud bolt
  • Hastelloy C276 fully threaded rod
  • ASTM B574 UNS N10276 double ended threaded rod
  • 2.4602 Hastelloy C22 tap end threaded rod
  • Nickel alloy c22 right and left hand threaded rod
  • Alloy c276 extra fine threaded rod
  • All Thread rods

Get best price for South Africa, USA, UAE, Nigeria, Oman, Qatar & Saudi Arabia from genuine hastelloy threaded rod suppliers

Tie bolt thread diameter Threads directions Thread start
  • UNC threads #4 to 4″
  • UNF threads #4 to 1-1/2″
  • 8 UN threads 1-1/8 to 4″
  • Acme threads 1/4 to 5″
  • Right Hand
  • Left Hand
  • Single-start
  • Two-start
  • Multiple-start
Required testing & certificates Thread types Stud bolts end
  • Microstructure Analysis
  • Impact testing
  • MTC 3.1
  • Tensile test
  • Charpy V-notch test
  • Rockwell / Brinell Hardness test
  • 8-Thread Series (8UN)
  • BSF
  • UNEF
  • Coarse thread (UNC)
  • Fine Thread (UNF)
  • UNJ
  • 12-thread series (12-UN)
  • Metric coarse
  • Metric fine
  • ACME
  • Trapezoidal
  • Half point
  • Cone point
  • Gimlet point
  • Chisel point
  • 45 degree angle cut
  • Milled end
  • Sheared end
  • Chamfer end
  • Semi-cone point
Hastelloy all thread rod meet standards Applications Surface treatments
  • ASME B18.31.2
  • DIN 976
  • DIN 975
  • DIN 2510
  • DIN 103
  • DIN 13-52
  • ASTM A722
  • BS
  • DAST 021
  • IS
  • ISO
  • ASME B16.5
  • ASME B1.1
  • ASME B1.5
  • Bridge construction
  • Offshore
  • Automotive industry
  • Aerospace
  • Wind mills
  • Solar plants
  • Ship building
  • Flange joints
  • Petrochemical plants
  • Rigs
  • Plain
  • Oil
  • Nickel Plated
  • Yellow Zinc Plated
  • Hot Dip Galvanized
  • Black Oxide
  • Green Finish
  • Black Finish
  • PTFE / Teflon
  • Mechanical
  • Clear Zinc Plated
  • Cadmium
  • Zinc Nickel
Manufacturing method
  • Cold Forged
  • Hot Forged
  • CNC machined

Check the tensile strength of Hastelloy studs suppliers in the Middle East and Asia can supply to your specifications at a great deal

Alloy C276 stud types

  • Alloy c276 Radius End Stud
  • ASTM B574 UNS N10276 Chisel Point Stud
  • 2.4819 Hastelloy C276 Reducing Stud
  • Hastelloy C276 Full Thread Stud
  • Hastelloy B Single End Stud
  • 2.4602 Hastelloy C22 Unthreaded Stud (Blank)
  • Nickel alloy c22 Double End Stud
  • ASTM B574 UNS N10276 Tap End Stud

Recommended nuts for alloy c276 stud bolts

Flange material Stud bolts Nuts
ASTM B564 ASTM B574 -ASTM F467

Hastelloy tie rod strength

Hastelloy B2 B3 C2000 C22 C276 G30 X
Tensile 760 760 390 660 680 586 660
Yield 350 350 310 240 300 241 240

Equivalent standard

Hastelloy B2 B3 C2000 C22 C276 G30 X
UNS N10665 N10675 N06200 N06022 N10176 N06030 N06022
DIN, WNr 2.4617 2.4600 2.4675 2.4602 2.4819 2.4603 2.4602

Hastelloy tie rod chemical composition

Hastelloy grade Cr Cobalt Phosphorus Iron Silicon Manganese Sulphur Mo Carbon Nickel
B2 (%) 1.00(max) 1.00(max) 0.03(max) 2.00(max) 0.10(max) 1.00(max) 0.30(max) 26.00(min)-30.0(max) 0.02(max) balance
B3 (%) 1.00(min)-3.00(max) 3.00(max) 0.03(max) 1.00(min)-3.00(max) 0.10(max) 3.00(max) 0.01(max) 27.0(min)-32.0(max) 0.01(max) 65.0(min)
C2000 (%) 22.0(min)-24.0(max) 2.00(max) 0.025(max) 3.00(max) 0.08(max) 0.50(max) 0.01(max) 15.0(min)-17.0(max) 0.01(max) balance
C22 (%) 20.5(min)-23.0(max) 0.50(min)-2.50(max) 0.04(max) 17.0(min)-20.0(max) 1.00(max) 1.00(max) 0.03(max) 8.00(min)-10.0(max) 0.05(min)-0.15(max) balance
C276 (%) 20.0(min)-22.5(max) 2.50(max) 0.02(max) 2.00(min)-6.00(max) 0.08(max) 0.50(max) 0.02(max) 12.5(min)-14.5(max) 0.01(max) balance
G30 (%) 28.0(min)-31.5(max) 5.00(max) 0.04(max) 13.0(min)-17.0(max) 0.80(max) 1.50(max) 0.02(max) 4.00(min)-6.00(max) 0.03(max) balance
X (%) 20.5(min)-23.0(max) 0.50(min)-2.50(max) 0.04(max) 17.0(min)-20.0(max) 0.03(max) 1.00(max) 1.00(max) 8.00(min)-10.0(max) 0.05(min)-0.15(max) balance

Hastelloy Threaded Rod Chemical Composition

Mechanical properties

Hastelloy threaded rod C22 B2 C276 B3 C2000 G30 X
Tensile strength 660 760 680 760 390 586 660
Yield stress 240 350 300 350 310 241 240
Elongation 35% 40% 50% 40% 45% 30% 35%
Hardness,Brinell

Hastelloy Stud Bolts Mechanical Properties

Hastelloy acme rod ACME thread chart

Designation
Acme
Size
Decimal
Pitch Dia. Minor Dia.
Max. Min. Max Min.
1/4-16 0.25 0.2148 0.2043 0.1775 0.1618
1/4-16 0.25 0.2158 0.2109 0.1775 0.1702
1/4-16 0.25 0.2168 0.2133 0.1775 0.1722
1/4-16 0.25 0.2188 0.2160 0.1775 0.1733
5/16-14 0.3125 0.2728 0.2614 0.2311 0.2140
5/16-14 0.3125 0.2738 0.2685 0.2311 0.2231
5/16-14 0.3125 0.2748 0.271 0.2311 0.2254
5/16-14 0.3125 0.2768 0.2738 0.2311 0.2266
3/8-12 0.375 0.3284 0.3161 0.2817 0.2632
3/8-12 0.375 0.3296 0.3238 0.2817 0.2730
3/8-12 0.375 0.3309 0.3268 0.2817 0.2755
3/8-12 0.375 0.3333 0.33 0.2817 0.2767
7/16-12 0.4375 0.3909 0.3783 0.3442 0.3253
7/16-12 0.4375 0.3921 0.3862 0.3442 0.3354
7/16-12 0.4375 0.3934 0.3892 0.3442 0.3379
7/16-12 0.4375 0.3958 0.3924 0.3442 0.3391
1/2-10 0.5 0.4443 0.4306 0.3800 0.3594
1/2-10 0.5 0.4458 0.4394 0.3800 0.3704
1/2-10 0.5 0.4472 0.4426 0.3800 0.3731
1/2-10 0.5 0.45 0.4463 0.3800 0.3745
5/8-8 0.625 0.5562 0.5408 0.4800 0.4569
5/8-8 0.625 0.5578 0.5506 0.4800 0.4692
5/8-8 0.625 0.5593 0.5542 0.4800 0.4723
5/8-8 0.625 0.5625 0.5584 0.4800 0.4738
3/4-6 0.75 0.6598 0.6424 0.5633 0.5372
3/4-6 0.75 0.6615 0.6534 0.5633 0.5511
3/4-6 0.75 0.6632 0.6574 0.5633 0.5546
3/4-6 0.75 0.6667 0.662 0.5633 0.5563
7/8-6 0.875 0.7842 0.7663 0.6883 0.6615
7/8-6 0.875 0.7861 0.7778 0.6883 0.6758
7/8-6 0.875 0.788 0.782 0.6883 0.6794
7/8-6 0.875 0.7917 0.7869 0.6883 0.6811
1-5 1 0.892 0.8726 0.7800 0.7509
1-5 1 0.894 0.8849 0.7800 0.7664
1-5 1 0.896 0.8895 0.7800 0.7703
1-5 1 0.9 0.8948 0.7800 0.7722
1 1/8-5 1.125 1.0165 0.9967 0.9050 0.8753
1 1/8-5 1.125 1.0186 1.0094 0.9050 0.8912
1 1/8-5 1.125 1.0208 1.0142 0.9050 0.8951
1 1/8-5 1.125 1.025 1.0197 0.9050 0.8971
1 1/4-5 1.25 1.1411 1.121 1.0300 0.9998
1 1/4-5 1.25 1.1433 1.1339 1.0300 1.0159
1 1/4-5 1.25 1.1455 1.1388 1.0300 1.0199
1 1/4-5 1.25 1.15 1.1446 1.0300 1.0219
1 3/8-4 1.375 1.2406 1.2188 1.1050 1.0720
1 3/8-4 1.375 1.243 1.2327 1.1050 1.0896
1 3/8-4 1.375 1.2453 1.238 1.1050 1.0940
1 3/8-4 1.375 1.25 1.2441 1.1050 1.0962
1 1/2-4 1.5 1.3652 1.3429 1.2300 1.1965
1 1/2-4 1.5 1.3677 1.3573 1.2300 1.2144
1 1/2-4 1.5 1.3701 1.3627 1.2300 1.2189
1 1/2-4 1.5 1.375 1.369 1.2300 1.2210
1 3/4-4 1.75 1.6145 1.5916 1.4800 1.4456
1 3/4-4 1.75 1.6171 1.6064 1.4800 1.4640
1 3/4-4 1.75 1.6198 1.6122 1.4800 1.4686
1 3/4-4 1.75 1.625 1.6189 1.4800 1.4708
2-4 2 1.8637 1.8402 1.7300 1.6948
2-4 2 1.8665 1.8555 1.7300 1.7135
2-4 2 1.8693 1.8615 1.7300 1.7183
2-4 2 1.875 1.8687 1.7300 1.7206
2 1/4-3 2.25 2.0713 2.045 1.8967 1.8572
2 1/4-3 2.25 2.0743 2.062 1.8967 1.8783
2 1/4-3 2.25 2.0773 2.0685 1.8967 1.8835
2 1/4-3 2.25 2.0833 2.0763 1.8967 1.8862
2 1/2-3 2.5 2.3207 2.2939 2.1467 2.1065
2 1/2-3 2.5 2.3238 2.3113 2.1467 2.1279
2 1/2-3 2.5 2.327 2.3181 2.1467 2.1333
2 1/2-3 2.5 2.333 2.3262 2.1467 2.1360
2 3/4-3 2.75 2.57 2.5427 2.3967 2.3558
2 3/4-3 2.75 2.5734 2.567 2.3967 2.3776
2 3/4-3 2.75 2.5767 2.5676 2.3967 2.3831
2 3/4-3 2.75 2.5833 2.576 2.3967 2.3858
3-2 3 2.736 2.7044 2.4800 2.4326
3-2 3 2.7395 2.7248 2.4800 2.4579
3-2 3 2.743 2.7325 2.4800 2.4642
3-2 3 2.75 2.7416 2.4800 2.4674
3 1/2-2 3.5 3.235 3.2026 2.9800 2.9314
3 1/2-2 3.5 3.2388 3.2237 2.9800 2.9574
3 1/2-2 3.5 3.2425 3.2317 2.9800 2.9638
3 1/2-2 3.5 3.25 3.2413 2.9800 2.9669
4-2 4 3.734 3.7008 3.4800 3.4302
4-2 4 3.738 3.7225 3.4800 3.4568
4-2 4 3.742 3.7309 3.4800 3.4634
4-2 4 3.75 3.7411 3.4800 3.4666
4 1/2-2 4.5 4.233 4.1991 3.9800 3.9291
4 1/2-2 4.5 4.2373 4.2215 3.9800 3.9563
4 1/2-2 4.5 4.2415 4.2302 3.9800 3.9631
4 1/2-2 4.5 4.25 4.2409 3.9800 3.9663
5-2 5 4.7319 4.6973 4.4800 4.4281
5-2 5 4.7364 4.7202 4.4800 4.4557
5-2 5 4.7409 4.7294 4.4800 4.4627
5-2 5 4.75 4.7408 4.4800 4.4662

Check Hastelloy ACME threaded rod and double ended studs thread weight, pitch chart and price list

The weight of a Hastelloy threaded bar support varies based on a range of factors. The thread size of the Hastelloy Alloy Threaded Bar diameter, and torque determines its weight holding capacity.

Hastelloy studs can be attached to concrete as a hole is drilled in the concrete block. Before fitting the Hastelloy Double Ended Studs in concrete, place a vapor barrier or round plug. You can fasten the stud using wrenches or heavy duty screwdrivers.

Hastelloy stud bolt is a high tensile strength grade specification. The Hastelloy Stud Bolts have a minimum tensile strength of 790mpa in the system.

Choose among the verified suppliers of Hastelloy tap-end studding in Dubai, check shear strength and use

A Hastelloy all thread is known as a threaded rod or stud that is used to connect two equipment efficiently. Hastelloy Allthread is used in piping equipment, chemical processing, petrochemicals, nuclear systems, reactor vessels, etc.

Fully heat-treated Hastelloy hollow threaded rod with higher yield and tensile strength

The fully threaded Hastelloy alloys have good corrosion resistance properties and have enhanced chemical content. Hastelloy Alloy Full Threaded Rod is coated with different protective coats that give them outstanding resistance. Furthermore, these rods can also be used in their stipulated conditions to give them an edge. Lastly, maintenance of these Hastelloy Alloy Tap-end Studding can also protect them from corrosive affluents.

Various types of Hastelloy Threaded Rod

Hastelloy Threaded Rods

Hastelloy Threaded Rods

Hastelloy Full Thread Studs

Hastelloy Full Thread Studs