Inconel 601 round bar

Inconel 601 Round Bar

Inconel 601 is an alloy metal. An Inconel 601 Round Bar is made of nickel and chromium. These bars are known to have shown massive strength. Inconel 601 Bar has the best corrosion resistance properties. It can handle well in higher temperatures. The temperature they can take up is 1250 degrees C. Inconel 601 Rounds does not easily deform. It does not matter dissociate under pressure. Compared to 600, 601 Iconium has higher chromium content. It also has increased aluminum content. This further gives it better oxidation resistance.

Verified Supplier

available 3 cars

Alloy 601 rod and Inconel 601 bar suppliers in UAE

Inconel 601 round bar specifications

Inconel 601 round bar specification

Inconel 601 round bar suppliers listed above offer MTC 3.1 & third party inspection in Saudi Arabia, Mexico, Nigeria, Egypt, Azerbaijan, USA, Oman & Syria
Inconel 601 round bar size Inconel alloy 601 flat bar size Alloy 601 hex bar size
3-800mm 33*30mm to 295*1066mm 2-100mm A/F
AMS 5715 shaft ASTM standard Werkstoff NR. 2.4851 square bar size UNS N06601 angle bar size
  • ASTM B166 UNS N06601
  • ASME SB 166 UNS N06601
4*4mm-100*100mm 3*20*20~12*100*100
Nickel alloy 601 rectangular bar supply state Nickel 601 rounds standards 2.4851 Inconel 601 bright bar finish
  • Annealed
  • The strain hardened
  • Solenoid quality
  • Trailed center less ground & polished
  • Smooth turned & polished
  • Hardened strain
  • Turned & rough polished
  • Peeled and polished
  • N06601
  • ASTM B166
  • AMS 5715
  • DIN 17752
  • DIN 17753
  • DIN 17754
  • EN10095
  • ISO9723
  • ISO 9724
  • ISO 9725
  • WERKSTOFF Nr 2.4851
  • Pickled
  • Bright
  • Hairline
  • Polishing
  • Peeled
  • Black
  • Mirror
Nickel 601 rounds melting point UNS 6601 shaft density EN 2.4851 billet curie temperature
1411 °C 8.11g/cm³ -196 (°C) / -320 (°F)
DIN 2.4851 rod surface UNS N06601 bar stock value added services Supply nicr23fe polished bar in following brand
  • Bright
  • Hot rolled pickled
  • Cold drawn
  • Sand blasting
  • Finished
  • Polished
  • Hairline
  • Turnkey inventory stocking programs
  • Custom cutting round bar to 16″
  • NORSOK certified stock on select alloys
  • Trepanning, grinding, PSQ, and turned, ground & polished bar
  • Special packaging
  • ISO Certified
  • 24 hr call out service
  • ASTM; ASME; ANSI; EN; DFAR compliant
  • Testing and secondary heat-treating services
  • Same day cutting capability

To speak with the Inconel 601 round bar stockists, stockholders, and distributors of these services directly,
use chat or email.

  • Special Metals USA
  • BOHLER
  • Kobe Special Tube, Japan
  • Tubacex Tubos Inoxidables S.A., Spain
  • Seah Steel Corporation, Korea
  • Schoeller Bleckmann, Austria
  • Nippon Steel Corporation, Japan
  • Sumitomo Metals, Japan
  • Sanyo Special Steel, Japan
WNR 2.4851 cold drawn bar maximum operating temperature AMS 5715 bright drawn round bar common trade names Hardness range of ASME SB166 cold finished round bar
-200 to +1000 °C Nicrofer 601 60-80(Rb)
Most popular ASME SB166 round bar types Inconel 601 hot rolled bars condition Manufacturing methods of Inconel alloy 601 bar
  • Alloy 601 round bar
  • Werkstoff NR. 2.4851 rod
  • AMS 5715 bar stock
  • ASTM B166 UNS N06601 annealed bar
  • Nickel alloy 601 hex bar
  • 2.4851 Inconel 601 square bar
  • Nickel 601 rectangular bar
  • UNS 6601 bright bar
  • EN 2.4851 rounds
  • UNS N06601 shaft
  • ASTM B166 UNS N06601 flat bar
  • DIN 2.4851 billet
  • WNR 2.4851 bloom
  • ASME SB166 polished bar
  • Werkstoff NR. 2.4851 hot rolled bars
  • Nickel alloy 601 forged round bar
  • Inconel 601 cold drawn bar
  • Inconel alloy 601 bright drawn round bar
  • Alloy 601 cold finished round bar

Compare our response time and price to those of other Inconel 601 round bar stockists.

  • Hardened & tempered
  • Annealed
  • Precipitation hardened
  • Forged
  • Grinding
  • Centerless grinding
  • Cold drawn
  • Hot rolled
Certification of 2.4851 Inconel 601 annealed bar Origin standards of UNS 6601 forged bar Nickel 601 hexagonal bar features
  • DFARS compliant
  • EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2 material test certificates (MTC)
  • Fumigation certificates
  • Raw materials certificate
  • Third party inspection report
  • Moisture testing report
  • Heat treatment charts
  • Surface roughness measurement
  • HS code commercial invoice
  • Laboratory test certificate from govt. approved lab
  • Form A for generalized system of preferences (GSP)
  • American Standard
  • Russia Standard
  • Janpanese Standard
  • European Standard
  • High mechanical properties at elevated temperatures
  • Superior resistance to oxidation, carburization, and sulfurization
  • Hot working is relatively easy
  • Excels in descaling resistance in cyclic oxidation applications with high temperature variation
EN 2.4851 forged cold drawn bar benefits UNS N06601 precision bar stock marking DIN 2.4851 peeled round bars applications
  • Great resistance to heat and corrosion even at extreme temperatures
  • Specification
  • Material grade
  • Nominal size
  • Schedule or wall thickness
  • Method of manufacturing
  • Heat number
  • Manufacturer’s name or custom logo – on request
  • Automobile exhaust gas sensor covers
  • Baskets and other furnace parts
  • Muffle furnaces
  • Industrial heat treatment furnace parts
  • Automobile glow plug parts
  • Special glass-melting furnace parts

For more than five years, these Inconel 601 round bar suppliers have been supplying to Iraq, Iran, Israel,
Ghana, Senegal, Tanzania. This supply’s physical verification has been verified.

ASME SB166 forged round bar documentation offered AMS 5715 rod shape WNR 2.4851 flat bar tolerances
  • Copy of packing List indicating details of sizes, quantity, weight, thickness etc.
  • Copy of invoice
  • Manufacturer’s mill test certificate certifying, heat no, finish, chemical composition, grade etc.,
  • Country of origin certificate (Original)
  • Bill of lading
  • NACE 0175/ ISO 15156 rorrosion resistance test
  • Hexagonal
  • Round
  • Square
  • Rectangular
  • Hollow
  • H13
  • K9
  • K10
  • K11
  • H8
  • H9
  • H10
  • H11
  • H12
  • K12 or custom
DIN 2.4851 hex bar payment term Alloy 601 round bar yield strength 2.4851 Inconel 601 rectangular bar lifespan
  • LC
  • TT
  • West union
  • Paypal
205 Mpa Over 50 years
Nickel alloy 601 round bar inspection plan ASTM B166 UNS N06601 bright bar packaging Werkstoff NR. 2.4851 bloom delivery time
  • Chemical test
  • Mechanical test
  • Destructive test
  • Non destructive test
  • Pmi test
  • Visual inspection test
  • Third party inspection test
  • Nabl approved lab test
  • Flaring Test

Effective and brief communication of the test with the above-specified distributors, dealers, and Inconel 601
round bar stockists in UAE

  • Wooden boxes
  • PE fabric bundles
  • Crates (steel/wooden)
  • Special crates for with each radius separated
  • Bundles (hexagonal)
  • Wrapped in plastic or standard seaworthy export packing
  • Custom
  • Generally it is 7-10 days if its in stock
  • 15-20 days if its not in stock

Buy cut-to-size ASTM B166 UNS N06601 shaft stock in the Middle East Countries

Alloy 601 round bar tolerances

Diameter, Size or width across flats(mm) Variation Permitted(mm)
Flat (width) Round Square and hexagon Flat (thickness) Flat (width) Round Square and hexagon Flat (thickness)
< 18 ≥6 ≦ 18 ≥ 6 ≦ 18 < 18 + 0 to – 0.0110 + 0 to – 0.0070 + 0 to – 0.0090 + 0 to – 0.0110
> 18 ≦ 30 > 18 ≦ 30 > 18 ≦ 30 > 18 ≦ 30 + 0 to – 0.0130 + 0 to – 0.0085 + 0 to – 0.0110 + 0 to – 0.0130
> 30 ≦ 50 > 30 ≦ 50 > 30 ≦ 50 > 30 ≦ 50 + 0 to – 0.0160 + 0 to – 0.0100 + 0 to – 0.0130 + 0 to – 0.0250
> 50 ≦ 80 > 50 ≦ 80 > 50 ≦ 80 > 50 ≦ 80 + 0 to – 0.0190 + 0 to – 0.0120 + 0 to – 0.0160 + 0 to – 0.0350
> 80 ≦ 100 > 80 ≦ 100 > 80 ≦ 105 + 0 to – 0.0220 + 0 to – 0.0140 + 0 to – 0.0250
> 100 ≦ 130 + 0 to – 0.0350
> 130 ≦ 160 + 0 to – 1.000
> 160 ≦ 320 + 1.000 to – 1.000

Inconel 601 round bar tolerance

Standard sizes of Inconel 601 rod

Metric US Bar ASTM/ Canadian Japanese
Bar Size Diam. (mm) Bar Size Diam. (Inch) Bar Size Diam. (mm2) Bar Size Diam. (mm)
5 5 #2 0.250 10M 100 6 6
5.5 5.5 #3 0.375 15M 200 10 10
6 6 #4 0.500 20M 300 13 13
7 7 #5 0.601 25M 500 16 16
8 8 #6 0.750 30M 700 19 19
9 9 #7 0.875 35M 1000 22 22
10 10 #8 1.000 45M 1500 25 25
11 11 #9 1.125 55M 2500 29 29
12 12 #10 1.250 32 32
14 14 #11 1.375 35 35
16 16 #12 1.500 38 38
18 18 #13 1.601 41 41
20 20 #14 1.750 44 44
22 22 #15 1.875 48 48
25 25 #16 2.000 51 51
28 28 #18 2.250 57 57

Inconel 601 round bar size chart

Technical information of werkstoff NR. 2.4851 flat bar

Alloy 601 UNS N06600 ASTM B166 ASME SB166

Alloy 601 bar weight chart

Size Kilogram / Foot Kilogram / Meter
3″ 10.900 35.762
3-1/4″ 12.800 41.996
3-1/2″ 14.850 48.772
3-3/4″ 17.001 55.780
4″ 19.306 63.340
4-1/4″ 21.908 72.249
4-1/2″ 24.4487 80.340
4-3/4″ 27.366 90.249
5″ 30.461 99.940
5-1/2″ 36.690 121.000
6″ 43.860 143.900
6-1/2″ 51.093 167.630

Inconel 601 round bar weight chart

Chemical composition of ASTM B166 UNS N06601 hex bar

Grade Fe,Iron Mn,Manganese Ni,Nickel C,Carbon S,Sulfur Cr,Chromium Si,Silicon Cu,Copper
Inconel 601 7.7-17.4 1.00 max 58.0 – 63.0 0.10 max 0.015 max 21.0 – 25.0 0.50 max 1.00 max

Nickel alloy 601 square bar mechanical properties

Elongation Yield Strength (0.2%Offset) Tensile Strength Hardness,Rb
70-40 % 30-60 Psi, 205-415 MPa 80-115 ksi , 550-790 MPa 60-80

HS code of SB 166 UNS N06601 material

Product Description HS Code
Inconel 601 round bar 73044100

Alloy 601 bright bar weight calculation formula

Weight calculation formula
Inconel 601 hex bar: Size (mm) X Size (mm) X 0.00680 = Wt. per Mtr.
EN 2.4851 flat bar: Width (mm) X Thickness (mm) X 0.00798 = Weight per Mtr.
Nickel 601 round bar: Diameter (mm) X Diameter (mm) X 0.00623 = Wt. per Mtr.
UNS 6601 square bar: Size (mm) X Size (mm) X 0.00788 = Wt. per Mtr.

Physical properties of nickel 601 rounds

Density Yield Strength (0.2%Offset) Specific Heat Melting Point Curie Temprature Permeability at 200 oersted 76°F (24°C)
8.11 g/cm3 205-415 MPa 0.107 Btu/lb•°F 2480 – 2571 °F -196 (°C) / -320 (°F) (1.003) 15.9 kA/m

AMS 5715 shaft material equivalent

Standards Country Value
UNS North America N06601
WNR Russia 2.4851
ASTM America B166
ASME Australia SB166
JIS Japan NCF 601
BS United Kingdom NA 49
GOST Russia XH60BT
AFNOR France NC23FeA
EN Europe NiCr23Fe
AMS United States 5715
ANSI America
SAE United States
AS Australia
DIN German 2.4851

Inconel 601 round bar properties

Nickel alloy 601 polished bar dimensions

Description Manufacture Method Shape Diameter Specification
.1875 DIA Cold drawn Rod/Bar/Round 0.1875 AMS 5715
.3125 DIA Hot finished 0.3125
.750 DIA 0.7500
.2500 DIA 0.2500
2.00 DIA 2.0000
1.250 DIA 1.2500
1.00 DIA 1.0000
1.500 DIA 1.5000
.500 DIA Not required 0.5000
.3750 DIA Hot rolled annealed & pickled 0.3750

Delivery time and location for 2.4851 Inconel 601 billet

Export to Shipping time
Indonesia 9
Oman 5
Bahrain 9
Kuwait 10
Singapore 8
Azerbaijan 30-45
Egypt 18
Turkey 21
Saudi Arabia 5-7
Nigeria 30
Colombia 45
Ecuador 60
Guyana 60
Paraguay 60
Uruguay 60

Learn the uses, stocks, and sizes of the Inconel 601 hex bar and alloy 601 round bar in detail

The 601 alloys are annealed at 2100 degrees F to 1149 degrees C. then the Alloy 601 Round Bar is cooled down rapidly. It is done at 1000 to 1400 degrees F or 540 to 760 degrees. It is done to prevent thermal cracking. Inconel is most used in techniques with high tolerance. It can be challenging to weld Inconel. The web that is created is prone to cracking. Inconel 718 is quite prone to cracking. This is done when the material is heated at 1900 degrees F.

Alloy 601 is used a lot in thermal processing machines and equipment. An Alloy 601 Rod is also used in industrial furnaces. It is used in many tubes, flame shields, retorts, etc., in chain curtains. 601 alloy is used in burner nozzles, strand annealing tubes, woven wire conveyor belts, and more. Many electrical and heat resistance elements use it. Inconel 601 Hex Bar is an alloy composed of nickel and chromium. It shows great strength. It also exhibits excellent corrosion resistance.

It depends on the precise blend of alloys and what the value of the bars will be. Alloy 601 is a robust and technical material. If we compare to Monel, Inconel Alloy 601 Bars are more expensive. It is because it has nickel and chromium added to it.

Both the alloys used in Inconel 601 Bar have nickel. They are much more costly than other stainless steel available in the market. It plays a vital role in many processing industries. It is used widely in the chemical and petrochemical industries. It is commonly found in thermal reactors and exhaust systems.

Verify the tolerances, characteristics, and yield strength of the Incoloy 601 flat bar and WerkstoffNr. 2.4851 square bar materials

Inconel 601 is a nickel and chromium alloy. It is used for engineering materials. It is used in applications that require resistance to heat and corrosion. ASTM B166 UNS N06601 Shaft has good resistance to aqueous corrosion. It also possesses superior mechanical properties. It can also be refined and used in other places.

It also has high mechanical strength. It can be formed, machined, and welded into steel. Incoloy 601 Flat Bar is used in many industries. It can be used for manufacturing different products. They can be availed in various finishings.

Inconel alloy 601 bars quotations from various manufacturers in Dubai can be obtained by comparing prices from several Inconel 6601 hexagon bar suppliers in the UAE

Square bars are used in a variety of industries. A Werkstoff Nr. 2.4851 Square Bar is a long bar in a rectangular shape. It is widely used in construction and structural systems. They can be maintained easily. They can be durable for an extended period. They are hard to cut because their thickness can be 2mm to 100mm.

An Inconel 601 Hexagon Bar is designed with a standard density. It can be an 8.1 g/cm cube. It possesses a melting point of up to 1411 degrees Celsius. It is a bar that has 6 sides in total.