Inconel 718 threaded rod

Inconel 718 Threaded Rod

An Inconel 718 threaded rod is a fastener that is fully threaded along its length. The Inconel 718 Threaded Rod is a superalloy austenitic grade of steel. These rods have superior resistance to corrosive affluents in harsh environments. The Alloy 2.4668 Tap End Threaded Rods work in cryogenic and temperatures up to 704 degrees C. These rods have good strength and outstanding performance. The UNS N07718 ACME Threaded Rod has outstanding mechanical properties and is age-hardenable. These rods have excellent creep strength and are available in a range of sizes.

Verified Supplier

Verified manufacturers and stockists

available 9 cars

Inconel 718 stud bolts and alloy 718 studs suppliers in UAE

Inconel 718 threaded rod specification


Inconel 718 Threaded Rod Specifications

ASME SB 637 N07718 threaded rod sizes Inconel 718 stud bolt size chart Length
  • UNS N07718 threaded rod diameter: 2-56 to 2″
  • 5 – 60mm
  • 2.4668 alloy 718 studs all thread: ¼” to 4″
  • Length: up to 61″
  • Alloy 718 fully threaded stud: ¼” to 2 ½”
  • Length: up to 61″
  • 1 meter
  • 2 meter
  • 3 meter
  • 3 feet
  • 6 feet
  • 10 feet
  • 12 feet
Inconel 718 acme threaded rod grades ASTM standard UNS N07718 continuous threaded stud bolts temperature range
  • Inconel 718 / 2.4668
  • ASTM B637 UNS N07718
  • ASME SB 637 UNS N07718
  • -423° to 1300°F
  • 700°C
2.4668 alloy 718 studs thread class Alloy 718 stud bolt types Nickel alloy 718 threaded rod types
  • Class 1A (Loose fit)
  • 3G
  • 8G
  • Class 2A (Medium fit)
  • 6G
  • 5 ONF
  • Class 3A (Tight fit)
  • custom
  • 5 HF
  • 4G
  • 5 CSF
  • 2G

Contact above Inconel 718 threaded rod suppliers & stockholders for large-diameter

  • Nickel alloy 718 blade studs
  • 2.4668 alloy 718 hub studs
  • Alloy 718 welding studs
  • ASME SB 637 N07718 double end stud bolts
  • ASTM B637 N07718 exhaust stud bolt
  • ASTM B637 UNS N07718 UNC stud bolt
  • Inconel 718 fully threaded studs
  • 2.4668 Inconel 718 knurled stud bolt
  • Alloy 718 reduced shank stud bolts
  • Nickel alloy 718 continuous threaded stud bolts
  • UNS N07718 tap end stud bolts
  • Inconel 718 fully threaded rod
  • Alloy 718 extra fine threaded rod
  • UNS N07718 tap end threaded rod
  • ASME SB 637 N07718 right and left hand threaded rod
  • 2.4668 Inconel 718 double ended threaded rod
  • All Thread rods

Get best price for UAE, Nigeria,South Africa, USA, Oman, Qatar & Saudi Arabia from genuine Inconel 718 threaded rod suppliers

Thread diameter Threads directions Thread start
  • UNF threads #4 to 1-1/2″
  • 8 UN threads 1-1/8 to 4″
  • UNC threads #4 to 4″
  • Acme threads 1/4 to 5″
  • Right Hand
  • Left Hand
  • Single-start
  • Two-start
  • Multiple-start
Inconel 718 stud bolt required testing & certificates Thread types Nickel alloy 718 all thread rod end
  • Rockwell / Brinell Hardness test
  • MTC 3.1
  • Charpy V-notch test
  • Tensile test
  • Impact testing
  • Microstructure Analysis
  • UNEF
  • 12-thread series (12-UN)
  • Fine Thread (UNF)
  • UNJ
  • Metric fine
  • Metric coarse
  • BSF
  • 8-Thread Series (8UN)
  • Coarse thread (UNC)
  • ACME
  • Trapezoidal
  • Cone point
  • Sheared end
  • Milled end
  • Gimlet point
  • Semi-cone point
  • Chisel point
  • 45 degree angle cut
  • Chamfer end
  • Half point
Alloy 718 tie bolt meet standards 2.4668 alloy 718 studs applications ASME SB 637 UNS N07718 acme threaded rod surface treatments
  • DAST 021
  • DIN 975
  • BS
  • ASTM A722
  • DIN 103
  • DIN 2510
  • IS
  • ASME B1.5
  • ASME B1.1
  • ASME B18.31.2
  • DIN 976
  • DIN 13-52
  • ISO
  • ASME B16.5
  • NACE MR-0175
  • ISO 15156
  • Rigs
  • Aerospace
  • Automotive industry
  • Wind mills
  • Ship building
  • Flange joints
  • Solar plants
  • Bridge construction
  • Offshore
  • Petrochemical plants
  • Oil
  • Clear Zinc Plated
  • PTFE / Teflon
  • Cadmium
  • Plain
  • Black Oxide
  • Black Finish
  • Yellow Zinc Plated
  • Nickel Plated
  • Hot Dip Galvanized
  • Green Finish
  • Mechanical
  • Zinc Nickel
Nickel alloy 718 lug stud bolt manufacturing method
  • Cold Forged
  • Hot Forged
  • CNC machined

ASME SB 637 N07718 stud types

  • ASME SB 637 UNS N07718 Tap End Stud
  • UNS N07718 Unthreaded Stud (Blank)
  • 2.4668 alloy 718 Double End Stud
  • Alloy 718 Reducing Stud
  • ASME SB 637 N07718 Full Thread Stud
  • ASTM B637 UNS N07718 Radius End Stud
  • Nickel alloy 718 Chisel Point Stud
  • ASTM B637 N07718 Single End Stud

Recommended nuts for Inconel 718 stud bolts

Flange material Stud bolts Nuts
ASTM B564 ASTM B637 ASME SB 637

Inconel 718 threaded bar strength

Tensile strength Yield strength
Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 482

Nickel alloy 718 all thread rod equivalent standard

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR
718 2.4668 N07718 NCF 718
  • NC 19 Fe Nb
  • MSRR 7115
  • MSRR 7116

ASTM B637 UNS N07718 threaded stud chemical composition

Grade Cr Mn S Cu Si C Fe Ni
Inconel 718 17.00 – 21.00 0.35 max 0.015 max 0.30 max 0.35 max 0.08 max 50.00 – 55.00

Alloy 718 tie bolt mechanical properties

Element Tensile Strength Yield Strength (0.2%Offset) Melting Point Density Elongation
Inconel 718 Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 482 1350 °C (2460 °F) 8.2 g/cm3 45 %

Inconel 718 Threaded Rod Properties

The Inconel 718 studs are designed to work in severe corrosive environments and have exceptional mechanical properties. Inconel 718 Studs allow for equipment to efficiently connect to different materials. These studs are common in the aerospace sector, chemical processing, nuclear reactors, and engine parts. The JIS NCF 718 Threaded Studs are also a feature in storage tanks, motor components, pollution-control equipment, etc.

Buy inconel 718 all thread at affordable prices from verified suppliers in the Middle East, view alloy 718 threaded bar corrosion resistance as per ASTM B637

The Alloy 718 threaded bar is designed with a superior chemical content of nickel, chromium, and molybdenum. This gives the Alloy 718 Threaded Bar good corrosion resistance, giving them an edge in the industry. The bars are, however, prone to rust when exposed to toxic media continuously for prolonged periods.

Contact directly an UNS N07718 ACME threaded rod manufacturers for custom sizes and factory price in Middle East

The Inconel 718 grade is covered in standard thread sizes ranging from M3 to M20 or more. These Inconel 718 All Thread fasteners have pitch sizes of 0.5mm to 2.5mm.

Check online inconel alloy 718 fully threaded rods and JIS NCF 718 threaded studs disadvantages, weight and dimensions chart

Inconel 718 studs have poor thermal conductivity with low work hardening capacity. The Inconel 718 Stud Bolts can lose their clamping force under tension leading to the fastener loosening in the system. The Nickel Alloy 718 Double Ended Studs may also fail if they are not properly installed.

Get shear strength of alloy 2.4668 tap end threaded rods and nickel alloy 718 double ended studs as per ASME SB637 in the Middle East and South Korea

There is no standard value to determine the shear strength like tensile and yield strength. The Inconel Alloy 718 Fully Threaded Rods shear strength is 520mpa, which is 60% of the material’s ultimate tensile strength.

Inconel 718 Threaded Rod Weight Chart


Inconel 718 Threaded Rod Weight Chart

Alloy 718 Threaded Rod Dimensions


Inconel 718 Threaded Rod Dimensions