Inconel pipe fittings

Inconel Pipe Fittings

For dealing with extreme temperature conditions, industrial standards demand for Inconel pipe fittings. Adding to this, excellent resistance to general corrosion and oxidation is seen by its ideal use case. This is also the reasons why they are also known by the name of high performance alloys.

There are industries who even check out for the Inconel 600 pipe fittings based on various factors. But when put for use case, they prominently are recommended for their corrosion resistance behavior. Other than this, excellent machinability characteristics and good ductility is exhibited. This is mainly because of the presence nickel, chromium and iron in high amounts in the chemical mixture.

Also, one of the most widely recommended material, which is demanded by industries to resist seawater and aqueous corrosions is alloy 600 buttweld fittings. It inherits special properties to resist corrosions, and also promise long duration. In other words, it exhibits high durability. All these properties are in association and complies with material standards ASTM B366.

Verified Supplier

Verified manufacturers and stockists

available 7 cars

Get connected with genuine ASTM B366 UNS N06600 elbow and alloy 600 fittings suppliers in UAE

Inconel Pipe Fittings specification

Inconel Pipe Fittings Specification

ASTM B366 Inconel buttweld fittings sizes Inconel Pipe Fittings strength Inconel fittings life
  • Inconel alloy seamless fittings : 1/2″ – 24″ (BW)
  • ASTM B366 Inconel welded fittings : 24 – 96″ (BW)
  • Inconel fabricated fittings : custom
Tensile stress

  • Inconel 600 : 655 MPa
  • Inconel 601 : 550 MPa
  • Inconel 625 : 930 MPa
  • Inconel 718 : 930 MPa

Yield strength

  • Inconel 600 : 310 MPa
  • Inconel 601 : 205 MPa
  • Inconel 625 : 517 MPa
  • Inconel 718 : 482 MPa
  • 35 to 40 years
Nickel content in Inconel pipe elbow Chromium (Cr) Manganese (Mn)
  • Inconel 600 : 72.00 %
  • Inconel 601 : 58.0 – 63.0 %
  • Inconel 625 : 58.0 %
  • Inconel 718 : 50.00 – 55.00 %
  • Inconel 600 : 14.00 – 17.00 %
  • Inconel 601 : 21.0 – 25.0 %
  • Inconel 625 : 20.0 – 23.0 %
  • Inconel 718 : 17.00 – 21.00 %
  • Inconel 600 : 1.00 %
  • Inconel 601 : 1.00 %
  • Inconel 625 : 0.50 %
  • Inconel 718 : 0.35 %
Inconel alloy welded fittings meet the requirements Inconel alloy butt welded fittings American standard Inconel metal weldable pipe fittings temperature
  • MTC EN 10204 3.1/ 3.2 certificate
  • Sour service
  • NACE MR0175
  • NACE MR0103
  • ISO 15156
  • NACE TM-0284
  • HIC tested
  • IBR
  • NORSOK
  • ANSI / ASME B16.9
  • ANSI/ ASME B16.28
  • ANSI/ ASME B16.25 (butt welding ends)
  • MSS-SP-43
  • MSS-SP-83
  • MSS-SP-95
  • MSS-SP 119 (ASME SB 366 Inconel bw fittings belled end elbow)
  • Inconel 600 : 2000°F
  • Inconel 601 : 1600-2250°F
  • Inconel 625 : 1800°F
  • Inconel 718 : 1300°F
American standard & specification Inconel alloy butt welded fittings manufacturing technique Ends of Inconel metal buttweld fittings
  • Seamless fittings: ASTM B366
  • Welded fittings: ASTM B366

Ask for a free sample from above Inconel Pipe Fittings suppliers & manufacturers, their major exporting countries are middle east, USA, South Africa, Egypt & Oman

  • Hot forming
  • Mandrel
  • Bevelled
  • Plain Bevel
  • Compound Bevel
ASTM B366 Inconel butt welded joint schedule chart Inconel metal butt welding fittings testing reqirements 7 manufacturing forms of Inconel alloy butt welded fittings
  • SCH 10
  • SCH 20
  • SCH 40
  • SCH 60
  • SCH 80
  • SCH 160
  • STD
  • XH
  • XXH
  • Magnetic Particle Examination (For above Sch 80 Inconel welded pipe fittings bevel ends)
  • Ultrasonic test
  • HIC tested
  • Positive Material Identification (PMI)
  • Hyrdrostatic test (according to ASTM A960/ A960M)

Buy Japanese origin material from above Inconel Pipe Fittings suppliers in UAE

  • Inconel elbow
  • Inconel alloy tee
  • ASTM B366 Inconel reducer
  • Inconel cap
  • ASME SB 366 Inconel stub end
  • Inconel pipe bend
  • Inconel alloy cross
ASME SB 366 Inconel bend radius Inconel metal pipe bend angle ASTM B366 Inconel seamless pipe fittings bending method
  • 3D
  • 4D
  • 5D
  • 6D
  • 8D
  • 10D
  • 15°
  • 22.5
  • 30°
  • 45°
  • 60°
  • 90°
  • 135°
  • 180°
  • Mandrel Bending
  • Rotary Draw Bending
  • Hot Induction Bending
  • Ram-Type Bending
  • Roll Bending
ASME SB 366 Inconel weld fittings testing & inspection Inconel alloy welded fittings DIN standards (Germany) Inconel welded pipe fittings EN standards (Europe)
  • 100% Radiography Tested
  • Positive Material Identification (PMI)
  • Magnetic Particle Examination (For above Sch 80 CS fittings bevel ends)
  • Ultrasonic test
  • HIC tested
  • DIN 2615-1 (Tee)
  • DIN 2615-2 (Tee)
  • DIN 28011 (Torispherical heads)
  • DIN 2617 (Caps)
  • DIN 2605-1 (Elbow)
  • DIN 2616-1 (Eccentric Reducer)
  • DIN 2618 (saddle)
  • DIN 2605-2 (Elbow)
  • DIN 2616-2 (Concentric Reducer)

 

  • EN 10253-2
Inconel metal butt weld fittings JIS standard
(Japan)
GOST standard (Russia) ASME SB 366 Inconel bw fittings applicable fluids
  • JIS B2312
  • JIS B2313
  • GOST 17375 (induction elbow)
  • GOST 17378
  • GOST 17379
  • GOST 17375
  • GOST 17376
  • Gas
  • Oil
  • Water
  • Air
  • Steam
Inconel alloy buttweld fittings marking ASTM B366 Inconel buttweld pipe fittings packaging
  • Grade
  • Heat number
  • Size
  • Dimensional standard – ASME B16.9
  • Manufacturers name
  • Wooden Pallet
  • Custom as per buyer choice
  • Wooden Cases
  • Carton Box

Are you looking for ASTM B366 Inconel 600 concentric/ eccentric reducer manufacturers in Dubai? find a verified stockist of buttweld WPNCI pipe bend who offers various sizes, view price per kg

Inconel alloy buttweld fittings grades

ASME SB 366 Inconel elbow

Inconel 45 degree elbow

Inconel 45 degree elbow

Inconel alloy 90 degree elbow

Inconel alloy 90 degree elbow

ASTM B366 Inconel 180 degree elbow

ASTM B366 Inconel 180 degree elbow

ASME SB 366 Inconel long radius elbow

ASME SB 366 Inconel long radius elbow

Inconel metal short radius elbow

Inconel metal short radius elbow

Inconel buttweld elbow

Inconel buttweld elbow

Types of Inconel alloy buttweld elbow ASTM B366 Inconel elbow angle direction & degrees
  • ASME SB 366 Inconel seamless elbow
  • Inconel alloy welded elbow
  • Inconel metal long radius elbow
  • ASTM B366 Inconel short radius elbow
  • ASTM B366 Inconel 1d elbow
  • ASTM B366 Inconel 1.5d elbow
  • Inconel metal 2d elbow
  • Inconel alloy 3d elbow
  • ASTM B366 Inconel 5d elbow
  • Inconel metal 8d elbow
  • Inconel alloy reducing elbow
  • 22.5 degree ASTM B366 Inconel elbow
  • 30° Inconel alloy elbow
  • 45° ASTM B366 Inconel elbow
  • 60° Inconel metal elbow
  • 90° Inconel alloy elbow
  • 120° ASME SB 366 Inconel elbow
  • 180° Inconel alloy elbow
  • 90° long radius Inconel elbow (LR)
  • 90° short radius ASTM B366 Inconel elbow (SR)
  • 45° long radius Inconel alloy elbow
  • 45° short radius ASTM B366 Inconel elbow
  • 180° long radius ASME SB 366 Inconel elbow (LR return)
  • 180° short radius ASTM B366 Inconel elbow (SR return)

Contact above Inconel Pipe Fittings suppliers & stockists for large diameter Inconel alloy elbow or custome angle

Inconel alloy tee

Inconel alloy equal tee

Inconel alloy equal tee

ASTM B366 Inconel reducing tee

ASTM B366 Inconel reducing tee

ASME SB 366 Inconel lateral tee

ASME SB 366 Inconel lateral tee

  • Inconel alloy buttweld tee
  • ASTM B366 Inconel reducing tee
  • Inconel equal tee
  • ASME SB 366 Inconel swept tee
  • ASTM B366 Inconel saddle tee
  • Inconel metal barred tee
  • Inconel alloy lateral tee
  • Inconel Y tee
  • ASME SB 366 Inconel straight tees
  • ASTM B366 Inconel reducing outlet tees

ASTM B366 Inconel reducer

Inconel metal concentric reducer

Inconel metal concentric reducer

Inconel eccentric reducer

Inconel eccentric reducer

Inconel alloy buttweld reducer

Inconel alloy buttweld reducer

Inconel alloy buttweld reducer are manufactured via seamless & welded method, following forms are available in all standard sizes as per ASME B16.9

  • ASTM B366 Inconel concentric reducer
  • Inconel metal eccentric reducer

ASME SB 366 Inconel pipe bend

ASTM B366 Inconel long radius bend

ASTM B366 Inconel long radius bend

SB 366 Inconel short radius bend

SB 366 Inconel short radius bend

Inconel metal hot induction bend

Inconel metal hot induction bend

Types Inconel Bend dimensions & standard
  • Inconel alloy long radius bend
  • Inconel short radius bend
  • ASME SB 366 Inconel piggable bend
  • Inconel alloy hot induction bend
  • Inconel alloy seamless pipe bend
  • ASTM B366 Inconel welded pipe bend
  • Inconel metal return bend
  • Inconel J bend
  • Inconel mitered pipe bend
  • ASTM B366 Inconel 2.5d pipe bend
  • Inconel metal 3d pipe bend
  • Inconel alloy 5d pipe bend
  • Inconel 10d pipe bend
  • ASME SB 366 Inconel 22d pipe bend
  • ASTM B366 Inconel L bend
  • OD 1/2” to 60”
  • DN15 – DN 1500
  • ASME B16.49
  • ASME B16.9

 

Inconel alloy stub end & cap

Inconel 600 short stub end

Inconel 600 short stub end

ASTM B366 UNS N06600 long stub end

ASTM B366 UNS N06600 long stub end

Alloy 600 seamless end cap

Alloy 600 seamless end cap

  • Inconel metal short stub end
  • ASTM B366 Inconel long stub end
  • Inconel alloy lap joint stub end
  • ASME SB 366 Inconel butt welded hemi-head pipe cap
  • Inconel collar

Inconel metal buttweld cross fittings

Nickel 600 equal cross

Nickel 600 equal cross

Inconel alloy 600 unequal cross

Inconel alloy 600 unequal cross

Nickel alloy 600 buttweld cross

Nickel alloy 600 buttweld cross

  • Inconel metal equal cross
  • Inconel unequal cross (reducing)
  • ASME SB 366 Inconel straight crosses
  • Inconel alloy reducing outlet crosses

Inconel swage nipple

  • ASTM B366 Inconel concentric swage nipple
  • Inconel metal eccentric swage nipple (reducing)

End types Inconel Swaged nipple

  • PBE – Plain Both Ends
  • BBE – Beveled Both Ends
  • TBE – Treaded Both Ends
  • PSE – Plain small end
  • BSE – Beveled small end
  • TSE – Treaded small end
  • PLE – Plain large end
  • BLE – Beveled large end
  • TLE – Treaded large end

ASME SB 366 Inconel bw fittings equivalent standard

STANDARD UNS BS WERKSTOFF NR. AFNOR GOST EN JIS
Inconel 600 N06600 NA 13 2.4816 NC15FE11M МНЖМц 28-2,5-1,5 NiCr15Fe NCF 600
Inconel 601 N06601 NA 49 2.4851 NC23FeA XH60BT NiCr23Fe NCF 601
Inconel 625 N06625 NA 21 2.4856 NC22DNB4M ХН75МБТЮ NiCr22Mo9Nb NCF 625
Inconel 718 N07718 2.4668

Inconel metal butt weld fittings chemical composition

Grade Si Ni C S Fe Cu Cr Mn
Inconel 600 0.50 max 72.00 min 0.15 max 0.015max 6.00 – 10.00 0.50 max 14.00 – 17.00 1.00 max
Inconel 601 0.5 max 58.0 – 63.0 0.10 max 0.015 max Balance 1.0 max 21.0 – 25.0 1.0 max
Inconel 625 0.50 max 58.0 min 0.10 max 0.015 max 5.0 max 20.0 – 23.0 0.50 max
Inconel 718 0.35 max 50.00 – 55.00 0.08 max 0.015 max 0.30 max 17.00 – 21.00 0.35 max

ASME SB 366 Inconel weld fittings mechanical properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 600 8.47 g/cm3 1413 °C (2580 °F) Psi – 95,000 , MPa – 655 Psi – 45,000 , MPa – 310 40 %
Inconel 601 8.1 g/cm3 1411 °C (2571 °F) Psi – 80,000 , MPa – 550 Psi – 30,000 , MPa – 205 30 %
Inconel 625 8.4 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 517 42.5 %
Inconel 718 8.2 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 482 45 %

Inconel Pipe Fittings Properties

Inconel stub end specification

ASME SB 366 Inconel stub end standard Inconel alloy stub end schedule Type of Inconel metal stub end Installed with
MSS SP-43
  • Schedule 5S
  • Schedule 10S
Type A Lap Joint flange
MSS SP-43
  • Schedule 5S
  • Schedule 10S
Type B Slip On flange
ASME B16.9
  • Schedule STD
  • Schedule XS
butt weld Lap Joint flange

Large diameter & thick wall nickel alloy 600 equal/ reducing Tee in Schedule 40/ 80/ 120/ 160/ STD, XXS, suitable for B31 Piping Systems, check difference and dimensions

The difference between the outer and inner diameter of the ASTM B366 Inconel 600 Reducer will give you its thickness.

ASTM B366 UNS N06600 Elbow is resistant to oxidation, even greater than that of commercially pure nickel. And because it is a nickel alloy, it exhibits good resistance under reductive conditions.

During annealing Inconel 600 pipe fittings will be heated to a specific temperature. Under controlled conditions, the fitting is then cooled at a very slow rate. On the other hand, tempering the fitting includes heating the Inconel 600 WPNCI Tee to a precise temperature. The temperature of the heat will be below its critical point. Tempering is often carried out in the air, vacuum or inert atmospheres.

This standard covers for the Inconel welded fittings. It also describes for how they deliver unique properties for their ideal use case, without any issues. This standard also plays a major role to also ensure the genuineness of Inconel 600 buttweld elbow, reducer, tee, end caps, cross and street elbow, so that customers can rely on the product with being assure that it does not deliver any degrading performance.

To get the best quality and testing standard assured ASTM B366 WPNCI, there is no other place than approaching to the suppliers at pipingmaterial.ae. This B2B platform assures customer only quality standards and affording price quotation for Inconel elbow. Adding to this, even the suppliers are limited, genuine and 100% verified. Such apt services are also associated with the suppliers guiding customers, if they face any confusion. For customers requiring the specific standard and custom sizes for Inconel pipe elbow, you would get the contact details of each suppliers on the platform, for contacting and mentioning your requirements.

Such friendly alternatives enable us to be one of the prominent and leading Inconel pipe fittings suppliers in UAE.

Get the best price from Inconel 600 pipe fittings manufacturers in the United Arab Emirates, also weight chart of ASTM B366 WPNCI stub end, compare DIN 2.4816 pipe cross price per

Advantages –

  • Excellent corrosion resistance properties in both oxidative and reductive environments.
  • Ability to resist corrosion in marine environments and in the presence of exhaustive gases and organic acids.
  • Good performance even in high temperatures

Disadvantages

  • Alloy 600 pipe fittings are hard to work and machine. Compared to stainless steel alloys, grade 600 is expensive because of its higher nickel content.
Inconel 600 45/ 90/ 180 degree elbow suppliers in Dubai offer hydrostatic testing with each delivery in Middle East countries

The difference between both processes is the temperature at which they take place. While the Nickel 600 End Cap can be Cold Worked at ambient temperature, the die for a hot forming is heated to prevent it from becoming cool. A heated die guarantees that crystallization does not occur until the forming process is complete. The forming process in hot working takes place with the use of high heat, whereas cold forming uses displacement as a process to achieve the desired shape.

How is an Inconel stub end attached to a pipe?

Stub ends are fittings used with lap joint flanges. The latter is slipped over the former fitting, which is then welded onto a pipe spool. The flange moves around the Inconel Stub End, which is then attached to the mating flange once the bolt holes for both have been aligned.