Inconel plate

Inconel plate

Inconel annealed plate exhibits high tensile strength and absolute toughness. The plates are efficient in working at low cryogenic temperatures. Inconel rolling plate is composed of 73% nickel, 21% chromium and 6% iron which makes the material highly resistance against oxidation and corrosion at elevated temperatures and pressure. Inconel clad plate form thick passivating firm oxide layer which protects the material from chemical salts and alkalis.

Verified Supplier

Verified Stockists (Contact directly for instant quote)

available 4 cars

Seek out a leading Inconel sheet suppliers in UAE who offer a range of sizes, view dimensions and properties

Complete information for Inconel sheet grade

Note: Below information is taken from trusted resourse

Grade ASTM AMS WNR Temprature Strength Nickel content Lifespan
Inconel 600
  • ASTM B168
  • ASME SB168
AMS 5540 WNR 2.4816
  • 1900 – 2250°F
  • 1040 – 1230°C
  • Yeild: 172 to 345 MPa
  • Tensile: 655 MPa
72% 30 years
Inconel 601
  • ASTM B168
  • ASME SB168
AMS 5870 WNR 2.4851
  • 1600-2250°F
  • 870-1230°C
  • Yeild: 205 Mpa
  • Tensile:550 MPa
58-63% over 30 years
Inconel 625
  • ASTM B443
  • ASME SB443
AMS 5599/5869 WNR 2.4856
  • 2000°F
  • 1093°C
  • Yeild: 490 Mpa
  • Tensile: 690 MPa
58% over 50 years
Inconel 718
  • ASTM B670
  • ASME SB670
AMS 5596/5597 WNR 2.4668
  •  -253° to 1300°F
  • -423° to 705°C
  • Yeild: 725 MPa
  • Tensile: 1035 MPa
52.5% 25 to 35 years
Inconel X-750
  • ASTM B637
  • ASME SB637
AMS 5542/5598 WNR 2.4669
  • 2540-2600°F
  • 1393-1427°C
  • Yeild: 620 MPa
  • Tensile:695 MPa
70% 25 to 30 years
Incoloy 800
  • ASTM B409
  • ASME SB409
AMS 5877 WNR 1.4876
  • 1600–2250°F
  • 871–1232°C
  • Yeild: 240 Mpa
  • Tensile: 520 MPa
30–45% 35 to 40 years
Incoloy 800H
  • ASTM B409
  • ASME SB409
AMS 5871 WNR 1.4958
  • 1740 – 2190°F
  • 950 – 1200°C
  • Yeild:241 Mpa
  • Tensile:552 Mpa
30-35% 35 to 40 years
Incoloy 825
  • ASTM B424
  • ASME SB424
WNR 2.4858
  • 1600–2150°F
  • 870–1180°C
  • Yeild: 241 MPa
  • Tensile: 586 MPa
38-46% 35 to 45 years

Check Inconel plate complete specification at a glance ! Call now to get price of Inconel sheets by top 6 stockists in Dubai, Abu Dhabi, Sharjah, Ajman, Mumbai and India

Are you searching for cut-to-size Inconel strip and annealed plate stockists and importers in Middle East countries? Your search end here, see the welding process

Inconel plate specification gathered from various reliable suppliers


Inconel Plate Specification

For larger sizes, please contact the Inconel plate suppliers listed above in the United Arab Emirates.
Manufacturing size range of Inconel alloy plate/ sheet Inconel strip sizes Inconel rolling plate edges
  • Thickness: 0.1 to 100 mm
  • Width: 10 to 2500 mm
  • Length: 2000/2500/3000 mm
  • Gauge: 28
  • Width: under 600 mm
  • Length: upto 15 m
  • Slit edge
  • Rolled edge
Inconel coil AMS ASTM Standard of Inconel alloy strips Density of Inconel alloy foil
  • AMS 5540
  • AMS 5870
  • AMS 5599/5869
  • AMS 5596/5597
  • AMS 5542/5598
  • AMS 5542/5598
  • AMS 5877
  • AMS 5871
  • ASTM B168
  • ASTM B443
  • ASTM B670
  • ASTM B637
  • ASTM B409
  • ASTM B424
  • 0.315 lbs/in³8.72 g/cm³
Maximum operating temperature Inconel sheet melting point Temperature range
  • 982°C
  • 1,290°C & 1,350°C
  • 980°C
Grades Hardness range of Inconel alloy cold rolled plate Elongation
  • 220 HB
  • 30 % min
Inconel annealed plate surface finish classes Most common types of Inconel rolling sheet Manufacturing technique of Inconel alloy hot-rolled plate
  • Class A : finest finish
  • Class B: slightly less fine finish
  • Class C : most basic finish
  • Inconel Coil
  • Foils
  • Inconel alloy Shim sheet
  • Inconel metal alloy clad plate
  • Inconel steel rolls
  • Annealed plate
  • Inconel metal Strips
  • Sheet
  • Inconel steel alloy plate

Compare our pricing and turnaround time to those of comparable Inconel plate stockists.

  • Roll forming
  • Cold rolling
  • Hot rolling
Features Welding method Supply Inconel plate in following brand
  • Metallurgical stability
  • Weldability
  • Strength
  • Corrosion resistance
  • Outstanding heat resistance
  • PLASMA
  • SAW
  • SMAW (MMA)
  • GTAW (TIG)
  • GMAW (MIG/MAG)
  • Outokumpu
  • Valbruna Stainless Steel
  • VDM
  • Columbus Stainless
  • Nippon Yakin
  • Special Metals (SMC)
  • HAYNES International
  • ATI
Inconel shim stock marking Inconel alloy hot-rolled plate finish Applications
  • Origin of material
  • Manufacturer logo / name
  • Material grade
  • Manufacturing date
  • Sizes
  • ASTM/ ASME standard
  • Glossy
  • Brushed
  • Matte
  • Mirror
  • Sandblasted
  • Electroless nickel plating
  • Aerospace equipment
  • Jet Engine exhaust systems
  • Moto exhaust systems
  • Nuclear
  • Sour gas production tubes

Inconel alloy rolling plate to South Africa, the Middle East, Egypt, the US, Oman, and Saudi Arabia have been supplied by the above  top ten genuine suppliers of Inconel plates

Inconel annealed plate modulus of elasticity Coefficient of thermal expansion Inconel rolling plate velocity
  • 205 GPa
  • 1.28 x 10-5 1/K (at 20°C)
  • 5820 m/s
Transport Inconel sheet welding electrode Delivery time
  • By air
  • By sea
  • INCONEL® Welding Electrode 182
  • INCONEL® Welding Electrode 112
  • 7-10 days if its in stock
  • 15-20 days if its not in stock
  • Oman/ Qatar/ Saudi Arabia – 3-5 days (by Air / Ship)
Standard of Inconel cold-rolled plate Certification of Inconel alloy foil Value added services
  • DIN 17742
  • ASTM B443
  • DIN 17750
  • AMS 5599
  • ASTM B168
  • AMS 5869
  • BS 3072-3076 (NA14)
  • ISO 6208
  • AMS 5540
  • Third Party Inspection Report
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • EN 10204/3.1B
  • Certificate of Origin legalized
  • Blanking
  • Slitting
  • Polishing
  • Cutting to length
  • Bending
  • Edge preparation
  • Sawing
  • Mechanical processing
  • Shearing
  • Welding

For these services, contact mentioned Inconel plate stockists, and distributors via chat or email.

Packaging Inconel strip testing requirements Inconel alloy sheet hardness type
  • Wooden Pallets
  • Customized Pallets
  • Bubble wraps
  • Steel Strips Bundled
  • Mechanical test
  • Destructive test
  • Flaring Test
  • Third party inspection test
  • Visual inspection test
  • Nabl approved lab test
  • Chemical test
  • Non destructive test pmi test
  • Half Hard
  • Spring Hard
  • Quarter Hard
  • Soft
  • Hard
Inconel coil processing Cutting method of incoenel alloy rolling sheet Electrical conductivity
  • Grinding
  • Trepanning
  • Boring
  • Leveling
  • Edging
  • Deburring
  • Precision Rerolling
  • Heat Treating
  • Oxy-propane flame cutting
  • Waterjet cutting
  • Plasma cutting
  • Laser cutting

Contact the above-mentioned Inconel plate wholesalers, dealers, and stockists directly for the above-mentioned cuts.

 

  • 16.5 W / m
Difference between plate, sheet & Foil Inconel shim stock characteristics Documentation offered
  • Sheet: 0.5mm – 600 thick
  • Plate: 600 or thicker
  • Foil: less than 0.2mm thick
  • Heat- and corrosion-resistant
  • Good low-temperature strength
  • Good hot and cold processing characteristics
  • Hot/cold fatigue properties
  • Copy of Packing List indicating details of Sizes, quantity, weight, thickness etc.
  • Mill Test Certificate
  • Country of Origin Certificate
  • Bill of Lading.
  • Copy of Invoice

Thickness of Inconel alloy annealed plate

1″ 1/2″ 3/16″ 1/4″ 3/8″ 5/8″ 1 1/2″ 3/4″ 2 1/2″ 2″ 1 1/4″ 1 3/4″ 3″
25.4 12.7 4.8mm 6.3 9.5 15.9 38.1 19 63.5 50.8 31.8 44.5 76.2

Inconel plate hs code

Material HS code
Inconel plate 72083710

Size chart of Inconel cold rolled plate

Inconel plate sizes
Size (in mm) Size (in inches)
3.96 0.156
12.7 0.500
3.18 0.125
6.35 0.250
22.2 0.875
3.40 0.134
7.92 0.312
19.1 0.750
15.9 0.600
9.53 0.375
4.75 0.187
76.2 3
25.4 1
63.5 2.500
50.8 2
31.8 1.250
38.1 1.500
28.6 1.125
44.5 1.750

Inconel alloy rolling sheets weight chart

Gauge Inconel sheet
Weight (lb/ft2)
22 1.26
8 6.93
26 0.756
16 2.52
24 1.008
20 1.512
18 2.016
11 5.04
14 3.15
12 4.41
10 5.67

Thickness tolerance of Inconel rolling plate

Tolerance up to & under nominal thickness t (mm)
Width w (mm) 4.5<t <6.0 20.0<t <25.0 6.0<t <8.0 2.5<t <4.5 8.0<t <10.0 10.0<t <12.5 12.5<t <16.0 30<t <40.0 16.0<t <20.0 25.0<t <30.0
2400< w <2700 0.80 1.1 0.80 0.80 0.80 0.90 1.7 1.0 1.3
w < 1200 0.23 0.80 0.30 0.20 0.32 0.35 0.80 1.4 0.80 1.0
1200< w <1500 0.25 0.90 0.30 0.20 0.35 0.38 0.80 1.4 0.80 1.0
2700< w <3000 0.80 1.3 0.90 1.0 1.0 1.0 1.8 1.1 1.4
2100< w <2400 0.80 1.0 0.80 0.80 0.80 0.80 1.5 0.90 1.1
1500< w <1800 0.28 0.90 0.32 0.20 0.38 0.40 0.80 1.5 0.80 1.1
1800< w <2100 0.30 0.90 0.36 0.20 0.40 0.45 0.80 1.5 0.80 1.1

Inconel alloy coil mechanical properties

Alloy 625 Alloy 600 Alloy 601 Alloy 718
Tensile strength 760 MPa 550MPa 650 MPa 965 MPa
Yield strength 345 MPa 240 MPa 300 MPa 550 MPa
Elongation 30 min 30 min 30 min 30 min

Equivalent material of Inconel coil

Standards Country Inconel 625 Inconel 601 Inconel 718 Inconel 600
UNS North America N06625 N06601 N07718 N06600
WNR Russia 2.4856 2.4851 2.4816 2.4668
ASTM America ASTM B443 ASTM B168 ASTM B670 ASTM B168
ASME Australia ASME SB443 SME SB168 ASME SB670 ASME SB168

Types of Inconel metal sheet

Inconel alloy coil

Inconel alloy coil

Inconel plate

Inconel plate

Inconel metal strip

Inconel metal strip

Inconel steel foil

Inconel steel foil

Inconel metal alloy rolling plate

Inconel metal alloy rolling plate

Inconel annealed plate

Inconel annealed plate

Inconel steel hot-rolled plate

Inconel steel hot-rolled plate

Inconel alloy cold-rolled plate

Inconel alloy cold-rolled plate

Inconel steel alloy shim stock

Inconel steel alloy shim stock

Inconel chemical composition

Grade Cu Ni Mo Cr Fe Al Nb + Ta Mn
625 1 % max. 58 – 71% 8 – 10 % 21 – 23% 5 % 0.4% max. 3.2 – 3.8 % 0.5% max.
600 0.50% max 72.00% min 14.00-17.00% 6.00-10.00% 1.00% max
718 0.30 max 50-55 2.80-3.30 17-21 0.20-0.80 0.35 max

Inconel Plate Properties

Gauge chart of Inconel hot rolled plates

Gauge 30 26 24 22 20 18 16 14 12 11 10 9 8
Gauge Decimal (inches) 0.0125 0.0187 0.0250 0.0312 0.0375 0.0500 0.0625 0.0781 0.1094 0.1250 0.1406 0.1562 0.1719

Inconel alloy annealed plate tolerances on length

Nominal length (mm) 2,000 < L < 8,000 L > 8,000 L < 2,000
Tolerance(mm) Plus 0.005 times L 40 10
Minus 0 0 0

Inconel rolling plates tolerances on width

Nominal length (mm) 1200 < w  < 1500 w < 1200 w > 1500
Trimmed edge Plus 5 3 5
Minus 0 0 0
Mill edge Plus 20 20 20
Minus 0 0 0

Delivery location and schedule for Inconel foil

Note: below table is published based on data collected by reliable suppliers

Delivery by Ship/ Air

Export to Price variations and estimated delivery
Vietnam  5 % extra | 14 days
South Korea  5 % extra | 7 days
Japan  5 % extra | 7 days
Sri Lanka  5 % extra | 5 days
Saudi Arabia  5 % extra | 3-5 days
Maldives  5 % extra | 7 days
Qatar/ Oman  5 % extra | 3-5 days
Bangladesh  5 % extra | 14 days
Mayanmar  5 % extra | 25 days
Taiwan  5 % extra | 15 days

Inconel alloy strip dimension

KG P/M2 27.0 14.4 8.1 6.3 10.8 4.5 28.0 18.0
Dimension (mm) 3 X 1200 X 3000 1.6 X 1200 X 3048 0.9 X 1219 X 3048 0.7 X 1219 X 3048 1.2 X 1219 X 3048 0.5 X 1000 X 2000 3.18 X VARIOUS ANN 2.0 X 1219 X 3048

Do you need a genuine trader to purchase Inconel coil and clad plates of popular brands such as Nippon, Outokumpu, and ThyssenKrupp, etc, get here and view the corrosion rate

Hastelloy and Inconel are two very well known and widely used industrial material, which one is better, lets checks out the difference between these two materials:

Hastelloy plate

  • Chemical composition- molybdenum and tungsten
  • Highly resistance to several corrosion and erosion corrosion.
  • Corrosion resistance- Hastelloy have exceptional resistance to corrosion against many harsh acids such as hydrochloric acid, sulphuric acid, acetic acid, etc.
  • Temperature tolerance- Hastelloy working applications are limited around 800°C.

Inconel plate

  • Chemical composition- high percentage of nickel and chromium
  • Have excellent high temperature and pressure applications.
  • Corrosion resistance- these exhibits good resistance against marine, brine and seawater corrosions.
  • Temperature tolerance- Inconel can work efficiently at elevated temperatures up to 1000°C.

Both Hastelloy and Inconel plate are outstanding industrial materials utilized in various industrial operations with respect to their applications.

Quickly click on pipngmaterial.ae and check out industrial leading Inconel plate manufacturers in UAE. It is one of the most trusted B2B platform for piping materials only providing you limited verified manufactures and suppliers which delivers you top-notch industrial standard materials. The platform also offers you contact details of the suppliers and manufacturers so that you can easily access them and get all your queries solved.

Inconel sheet can easily be welded using titanium inert gas (TIG) welding method. It is the most widely used welding technique for Inconel sheet and providing more durability and strength to the material.

Locate stocking distributors with an extensive assortment of Inconel foil, cold/ hot rolled plates to meet your needs, see the advantages

Advantages of using Inconel plates

  • Inconel hot rolled plate are built with strong high pressure and temperature applications hence can work efficiently in harsh conditions.
  • The material can successfully withstand great force or mechanical loads.
  • Inconel cold rolled plate outstanding corrosion and oxidation resistance properties which them excellent materials to be used in seawater and other marine operations.
  • These are utilized for wide range of applications such as providing support, width, strength and anchoring to the system.
  • Display strong resistance against pitting and crevice corrosion.
Choose among the best Inconel shim stock and rolling sheets suppliers for high heat applications, call for material test certificate and know about the thickness

Surface finishing for Inconel plate

There are two widely used surface finishing for Inconel plate:

  • Polishing- in this method the abrasive tools are used for providing smooth even surface to the plate with excellent aesthetic appeal.
  • Hammering- this technique involves hammering of the metal using machine or human force with using hammering tools to flatten multiple layers of metal sheets to form single layer metallic plate by pressing method. This process provides toughness and strong mechanical properties to the material.

See which grade of Inconel plates is most suitable and economical for your requirement, compare price per kg in India and China with the largest stockists of inconel sheets