Inconel Round Bar Spotlight
| Sizes in Ready Stock | 3mm to 350mm |
|---|---|
| Grades | Inconel 601GC, 713C, 603XL, 617, 686, 690, 693, 706, 725, 740H, 751, 783, 713, 751, 750 and Inconel 602CA Rod |
| Shapes | Inconel Round Bar, Hex Bar (A/F), Flat Bar, Square Bar/ Rod, Forged Bar, Rectangle, Ingot, Billet, Bloom, Solid Bar, PSQ Bar (Pump Shaft Quality), Hollow Bar and Inconel Rod |
| Raw Material Origin | Japanese, American, European, Indian, Korean |
| Surface | Black, Bright, Mirror, Polishing, Hairline, Peeled, Pickled |
| Brands | Outokumpu, Yakin, ATI, Ratnaveer, Mukund |
| Delivery Conditions | Cold Drawn, Forged, Hot Rolled, machined, heat treated, Centerless Grinding, peeled, oxidized, Grinding, descaled resp. pickled, ground and polished |
| Approvals | ADNOC, Q CHEM, EIL, MA’ADEN, KNPC, BAPCO, SABIC, KOC, Saudi Aramco, RINA, KPI |
| Dimensions | ASME, EN, DIN, BS, JIS, ASTM, AISI |
| Tolerances | H8 to K12 |
| Test Certificates |
|
| Verified Yakin Inconel Round Bar Dealers and Distributors in UAE |
|
| Delivery Time | France : 28 Days, Norway : 45 Days |
| HSN Code | 75051220 |
How pipingmaterial.ae is different among other B2B platforms?
Explore Middle East FZE, a legally registered UAE entity since 2016, has channeled its 26 years of trade knowledge into building Pipingmaterial.ae as a one-stop B2B solution for industrial piping materials.
- MTC Guidance
- Grade Comparison
- Weight Calculators
- Ready Stock
- Direct Delivery
- Approved Manufacturers
Inconel Rod Suppliers in UAE
Inconel Round Bar Specification
Inconel Round Bar: 3mm – 800mm Dia
Inconel Square Bar: 4mm*4mm – 100mm*100mm Dia
Inconel Flat Bar: 2mm~100mm Thick, 10mm~500mm Width
Inconel Hex Bar: 2mm – 100mm Dia
Inconel Rectangular Bar: 33mm*30mm to 295mm*1066mm Dia
Comply with: ASTM, ASME, ANSI, AMS, EN, DFAR, NORSOK, GB, GOST, JIS, NACE MR0175/ ISO 15156
Suitable temperatures: Cryogenic and High Temperatures
Heat Treatment: Age hardened, Solution Annealed and Cold Worked
MTR: Ultrasonic, NDT, PMI, Eddy Current Test reports
Material identification: Manufacturer Name, HEAT NO./LOT NO., Grade
Get Quote Directly from Inconel Round Bar suppliers in UAE
100% Tested Inconel Rod with MTC EN 10204 3.1/3.2
Grades of Inconel Bars and Rods
Ready Inventory Of Inconel Bar
- Dimensions: 3mm-180mm
- Standards: ASTM B446, B637, B160, B166
- Dimensions: Thickness 0.5mm- 200mm, width:1.5mm -250mm
- Standards: ASTM B446, B637, B160, B166
- Dimensions: 2mm to 200mm
- Standards: ASTM B446, B637, B160, B166
- Dimensions: 33mm*30mm to 295mm*1066mm Dia
- Standards: ASTM B446, B637, B160, B166
- Dimensions: OD 4mm to 300mm Diameter
- Standards: ASTM B446, B637, B160, B166
- Form: Forged Bar and Rod
- UNS/ WNR: 601GC grain-controlled UNS N06601, 2.4851
- Form: Forged Bar and Rod
- UNS/ WNR: UNS N06025 / W.Nr. 2.4633
- Form: Hex Bar and Rod
- UNS/ WNR: UNS N06603
- Form: Forged Bar and Rod
- UNS/ WNR: UNS N06617/ 2.4663a
- Form: Forged Round Bar and Rod
- UNS/ WNR: UNS N06686/ 2.4606
- Form: Hex Bar, Rounds and Rod
- UNS/ WNR: UNS N06690/ 2.4642
- Form: Forged Bar and Rod
- UNS/ WNR: UNS N06693
- Form: Forged Bar and Rod
- UNS/ WNR: UNS N09706
- Form: Forged Bar and Rod
- UNS/ WNR: UNS N07713, 2.4671
- Form: Forged Bar and Rod
- UNS/ WNR: UNS N07725, 1.4876
- Form: Forged Bar and Rod
- UNS/ WNR: UNS N07740
- Form: Forged Bar and Rod
- UNS/ WNR: UNS N07751, 2.4694
- Form: Forged Bar and Rod
- UNS/ WNR: UNS N07754, 2.4685
- Form: Forged Bar and Rod
- UNS/ WNR: –
- Form: UNS R30783 Inconel 783 Bright Bar
- UNS/ WNR: UNS R30783
- Form: Forged Bar and Rod
- UNS/ WNR: UNS N07722, 2.4646
- Dia: 16 – 120mm
- Supply Condition: Hot-rolled, Annealed
- Dimensions: 3mm- 120 mm
- Tolerance: s K11, K12, K13, H8, H9, H11
- Sizes: 16-120 mm, Length up to 8 meters
- Finish: Black
- Sizes 3-120 mm
- International Specification: s ASTM, DIN 1013, EN 10060
- Dimensions: 130mm- 500 mm Dia, 3 to 6 meters Length
- Surface: Rough turned, Machined
Do suppliers export Inconel Bar to Oman, Qatar and Kuwait?
Yes, Suppliers and Stockist export inconel round bar to these countries along with documents
| Diameter (mm) | 6.35mm | 7.93mm | 953mm | 12.70mm | 15.88mm | 19.05mm | 22.23mm | 25.40mm | 28.58mm | 31.75mm | 34.93mm | 38.10mm | 44.45mm | 50.80mm | 57.15mm |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Weight per Meter (kg) | 0.177 | 0.279 | 0.399 | 0.711 | 1.112 | 1.601 | 2.188 | 2.858 | 3.635 | 4.528 | 5.535 | 6.657 | 9.318 | 12.044 | 15.122 |
| Diameter (inches) | 1/4″ | 5/16″ | 3/8″ | 1/2″ | 5/8″ | 3/4″ | 7/8″ | 1″ | 1-1/8″ | 1-1/4″ | 1-3/8″ | 1-1/2″ | 1-3/4″ | 2″ | 2-1/4″ |
| Weight per Foot (lbs) | 0.054 | 0.085 | 0.122 | 0.217 | 0.339 | 0.488 | 0.667 | 0.871 | 1.108 | 1.380 | 1.687 | 2.030 | 2.840 | 3.670 | 4.620 |
Do suppliers provide MTC with Inconel Round Bar?
Yes, On pipingmaterial Stockist and Suppliers provide Mill Test Certificates as per EN 10204 3.1 & 3.2
Evaluate Inconel Hex Bar and Cold Drawn Bar Suppliers in Dubai, Compare Pricing at a Single Platform in Middle East Countries
Call Now for the Clients List Based in Below Locations
Reliable Inconel Round Bar Suppliers in UAE with a commitment to innovation and product integrity.
| Africa | Nigeria, South Africa, Kenya, Morocco, Egypt, Tunisia, Algeria |
|---|---|
| Middle East Countries | UAE, Saudi, Qatar, Kuwait, Bahrain, Oman, Iraq, Iran, Jordan, Lebanon, Syria, Yemen |
| MENA | Egypt, Morocco, Algeria, Tunisia, Libya, Israel, Palestine |
What certifications do Inconel Rod suppliers in UAE provide?
- NACE MR0175 / ISO 15156
- EN 10204 3.1 / 3.2 MTC
- DFAR, PED, RoHS, IBR on request
Buy Inconel Flat Bar and Bright Drawn Round Bar at Affordable Prices from Genuine and Verified Suppliers in UAE
Surface Conditions for Inconel Round Bars
| P | Polished |
|---|---|
| PR | Peeled & Reeled |
| BD | Bright Drawn |
| HF | Hot Finished |
| HRAP | Hot Rolled Annealed & Pickled |
| SRE | Slit Rolled Edge |
| P&T | Peeled & Turned |
| ST | Smooth Turned |
| RT | Rough Turned or peeled |
| CF | Cold Finished |
| CD | Cold Drawn |
| CG | Centreless Ground |
Is PMI-tested Inconel Round Bar available?
Yes, Suppliers provide PMI-tested Inconel Round Bar. ALso they can supply across Dubai, Abu Dhabi, Ajman, and Ras Al Khaimah.
Material Inspection Facility in Following Locations
Dependable Inconel Round Bar Suppliers in UAE with a focus on performance, safety, and innovation.
| Umm Al Quwain | Sharjah | Doha | Fujairah |
|---|---|---|---|
| Dubai | Muscat | Ras Al Khaimah | Riyadh |
| Abu Dhabi | Saudi Arabia | Ajman | Al Jubail |
How to Select the Right Inconel Grade?
- Temperature
- Corrosive Media
- Pressure/Creep
- Magnetic/Non-magnetic
- Fabrication
Check the Material of Inconel Bar Stock and Cold Finished Round Bar Tolerances, Properties & Yield Strength as per ASTM B166/ B446
Tolerance of Cold Drawn Inconel Bar
| Diameter in Inches (mm) | Permissible Variations of Inconel Round Bars from Specified Size in Inches (mm) | ||
|---|---|---|---|
| Under | Over | ||
| Over 1/2 ” (12.70) to 1 ” (25.40), excl | 0.002″ (0.05) | 0.002″ (0.05) | |
| 1″ (25.40) to 3/2 ” (38.10) Dia, incl | 0.0025″ (0.06) | 0.0025″ (0.06) | |
| 3/2″ (38.10) to 4 ” (101.60) Dia, incl | 0.003″ (0.08) | 0.003″ (0.08) | |
Inconel Rod Chemical Composition
| Grade | Si | Ni | Cr | S | C | Mn | Cu | Fe | Ti | Al | Mo |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Inconel 600 | 0.50 max | 72.00 min | 14.00 – 17.00 | 0.015 max | 0.15 max | 1.00 max | 0.50 max | 6.00 – 10.00 | – | – | – |
| Inconel 601 | 0.50 max | 58.0 – 63.0 | 21.0 – 25.0 | 0.15 min | 0.10 max | 1 max | 1 max | balance | – | – | – |
| Inconel 625 | 0.50 max | 58.0 min | 20.0 – 23.0 | 0.015 max | 0.10 max | 0.50 max | – | 5.0 max | – | – | – |
| Inconel 718 | 0.35 max | 50 – 55 | Bal | 0.015 max | 0.08 max | 0.35 max | 0.3 max | Bal | – | – | 2.8 – 3.3 |
| Inconel X-750 | .50 max | 70.0 min | 14.0 – 17.0 | .01 max | .08 max | 1.00 max | 0.50 max | – | 2.25 – 2.75 | 0.40 – 1.0 | – |
Inconel Flat Bar Mechanical Properties
| Grade | Yield Strength (0.2% Offset) | Tensile Strength | Elongation |
|---|---|---|---|
| Inconel 600 | Psi – 45,000 , MPa – 310 | Psi – 95,000 , MPa – 655 | 40 % |
| Inconel 601 | Psi – 30,000 , MPa – 205 | Psi – 80,000 , MPa – 550 | 30 % |
| Inconel 625 | Psi – 75,000 , MPa – 517 | Psi – 1,35,000 , MPa – 930 | 42.5 % |
| Inconel 718 | Psi – 70,000 , MPa – 482 | Psi – 135,000 , MPa – 930 | 45 % |
| Inconel X-750 | 868 MPa | 1267 MPa | 25 % |
Physical Properties of Inconel Rectangular Bar
| Grade | Density | Melting Point |
|---|---|---|
| Inconel 600 | 8.47 g/cm³ | 1413 °C (2580 °F) |
| Inconel 601 | 8.1 g/cm³ | 1411 °C (2571 °F) |
| Inconel 625 | 8.4 g/cm³ | 1350 °C (2460 °F) |
| Inconel 718 | 8.1 g/cm³ | 1350 °C (2460 °F) |
| Inconel X-750 | – | 1430 °C |
Different Grades of Inconel Round Bar and Their Equivalent
| Standards | Country | Inconel 600 Round Bar | Inconel 601 Round Bar | Inconel 625 Round Bar | Inconel 718 Round Bar | Inconel X750 Round Bar |
|---|---|---|---|---|---|---|
| UNS | North America | N06600 | N06601 | N06625 | N07718 | N07750 |
| WNR | Russia | 2.4816 | 2.4851 | 2.4856 | 2.4668 | 2.4669 |
| ASTM | America | B166 | B166 | B446 | B637 | B637 |
| ASME | Australia | SB166 | SB166 | SB446 | SB637 | SB637 |
| JIS | Japan | NCF600 | NCF 601 | NCF 625 | – | NCF X-750 |
| BS | United Kingdom | NA 13 | NA 49 | NA 21 | – | – |
| GOST | Russia | МНЖМц 28-2.5-1.5 | XH60BT | ХН75МБТЮ | – | – |
| AFNOR | France | – | NC23FEA | NC22DNB4M | – | – |
| EN | Europe | NiCr15Fe | NiCr23Fe | NiCr22MogNb | – | – |
| AMS | United States | 5665 | 5715 | 5666 | 5662/5663/5664 | 5747 |
| ANSI | America | – | – | – | – | – |
| SAE | United States | – | – | – | – | – |
| AS | Australia | – | – | – | – | – |
Why UAE Buyers Prefer Inconel Over Stainless Steel in Desalination Plants?
- Corrosion Resistance
- Temperature Performance
- Chemical Resistance
- Mechanical Strength
Explore Nearby Locations for the Quickest Delivery Options
Industry-leading Inconel Round Bar Suppliers in UAE known for consistent quality and robust construction.
| Country | Cities |
|---|---|
| Netherlands | Eindhoven |
| Belgium | Brussels |
| Belgium | Seraing |
| Netherlands | Haarlem |
| Belgium | Meeuwen-Gruitrode |
| Belgium | Westerlo |
| Netherlands | Rotterdam |
| Belgium | Leuven |
| Netherlands | Amsterdam |
| Belgium | Ghent |
| Netherlands | The Hague |
| Belgium | Antwerp |
Top Selling Inconel Round Bars Types in UAE
Inconel Rod
Inconel Rectangular Bar
Hot Rolled Inconel Round Bar
Inconel Precision Ground Stock
Inconel Round Bar
Hot Rolled Inconel Round Bar
American Standard of Inconel Round Bars
| Alloy 600 | UNS N06600 | ASTM B166, SB166, AMS 5665 |
| Alloy 625 | UNS N06625 | ASTM B446, SB446, AMS 5666 |
| Alloy 718 | UNS N07718 | ASTM B637, SB637, AMS 5662, AMS 5664, AMS 5663 |
| Alloy X750 | UNS N07750 | ASTM B637, AMS 5668, AMS 5667 |
Storage Sites of Partner Suppliers
| Region | City | Country |
|---|---|---|
| Middle East | Dubai | United Arab Emirates |
| Africa | Lagos | Nigeria |
| Middle East | Abu Dhabi | United Arab Emirates |
| Middle East | Dammam | Saudi Arabia |
| MENA | Cairo | Egypt |
| Middle East | Riyadh | Saudi Arabia |
| Middle East | Jeddah | Saudi Arabia |
| Africa | Johannesburg | South Africa |
| Middle East | Doha | Qatar |
| Middle East | Kuwait City | Kuwait |
| MENA | Casablanca | Morocco |
| Africa | Cape Town | South Africa |
| Africa | Abuja | Nigeria |
Delivery State of Hot Rolled and Cold Drawn Inconel Bar
| Inconel Bar Delivery Condition | Surface |
|---|---|
| Forged Bar | Polished |
| Black | |
| Hot Rolled Bar | Polished |
| Black | |
| Bright | |
| Pickled | |
| Cold Drawn Bar | Bright |
| Polished |
What are the main applications for Inconel rods?
- Aerospace
- Oil & Gas
- Power Generation
- Chemical/Petrochemical
- Marine & Desalination
- Food Processing
- Automotive
- General Industry
Inconel Round Bar UAE Projects
| Project Authority | Products | Applications |
|---|---|---|
| ADNOC | Inconel 625 Bars | Offshore desalination skids |
| DEWA | Inconel 718 Forged Bars | High-pressure pump shafts in Hassyan plant |
| SWCC Saudi Arabia | Inconel 825 Bars | Heat exchanger components |
| ADWEA | Inconel Alloys over Stainless Steel | Desalination tenders (post-2015) |
Talk to Several Certified Manufacturers of Inconel Round Stock, Size Range, Shipment & Cost of Freight in Middle East Countries
Want to buy Inconel Rods at mill rate? Contact below listed Inconel Bar suppliers for a most competitive quote. These companies export Inconel round bar material in Abu Dhabi, Riyadh, Jeddah, Dammam, Sharjah and other middle east countries. Azerbaijan and Jordan are landlocked countries so they import from UAE and Central Asia. You can contact the following Inconel Round Bar stockist in UAE. You can find ex-stock of standard sizes like 12mm dia Inconel rod in Dubai, Ajman, Sharjah and Fujairah. Chat with the listed suppliers and get quotes instantly via WhatsApp.
Inconel Cold Drawn Bar Size Chart
| US Bar | Japanese | Metric | Canadian / ASTM | ||||
|---|---|---|---|---|---|---|---|
| Diam. (Inch) | Bar Size | Diameter (mm) | Bar Size | Diam. (mm) | Bar Size | Diameter (mm²) | Bar Size |
| 0.250 | #2 | 6 | 6 | 5 | 5 | 100 | 10M |
| 0.375 | #3 | 10 | 10 | 5.5 | 5.5 | 200 | 15M |
| 0.500 | #4 | 13 | 13 | 6 | 6 | 300 | 20M |
| 0.625 | #5 | 16 | 16 | 7 | 7 | 500 | 25M |
| 0.750 | #6 | 19 | 19 | 8 | 8 | 700 | 30M |
| 0.875 | #7 | 22 | 22 | 9 | 9 | 1000 | 35M |
| 1.000 | #8 | 25 | 25 | 10 | 10 | 1500 | 45M |
| 1.125 | #9 | 29 | 29 | 11 | 11 | 2500 | 55M |
| 1.250 | #10 | 32 | 32 | 12 | 12 | – | – |
| 1.375 | #11 | 35 | 35 | 14 | 14 | – | – |
| 1.500 | #12 | 38 | 38 | 16 | 16 | – | – |
| 1.625 | #13 | 41 | 41 | 18 | 18 | – | – |
Other Materials of Round Bar Products
Other Products
Table of Content