IS 2062 e250 steel plate

is 2062 e250 steel plate

A plate which exhibits excellent torsional and strength characteristics is a IS 2062 E250 steel plates.

This characteristic contributes for components that can carry load-bearing situation. Adding to this, they also offer good stability. They also inherit good mechanical characteristic and toughness.

Verified Supplier

Verified Stockists (Contact directly for instant quote)

available 6 cars

Purchase from cut to size ms plate is 2062 e250 suppliers in UAE, view price and application

Good quality and guaranteed services are provided by suppliers at for ms plate is 2062 E250:

Customers are offered and welcomed with the reasonable pricing from the suppliers, so that they are not heavily charged here/

Limited suppliers, so it is very easy for the customers to also compare the pricing.

Worried on genuineness? Suppliers are 100% apt and genuine. They also provide in-hand solutions to the needs and standards of the customers; to avoid any confusions.

There are many other beneficial factors to both the suppliers and customers; and this is the only reason why they are one of the leading and well recognised IS 2062 E250 steel plate suppliers in UAE.

is 2062 e250 plate specification

IS 2062 E250 Steel Plate Specification


Length Thickness Width
3000 to 15000 mm 6 to 300 mm 1500 to 4050 mm
Standards Brand Services
IS 2062
  • JFE
  • Jindal steel power
  • SAIL
  • Nippon steel
  • ArcelorMittal
  • Mechanical processing
  • Slitting
  • Cut-to-length
  • Blanking
  • Sawing and shearing
  • Edge preparation
  • Polishing
  • Bending
Grades Get below from all IS 2062 e250 steel plate suppliers at Application
  • E250 Grade A
  • E250 Grade B
  • E250 Grade C


  • NABL Approved Lab Reports
  • Free quote
  • Testing report
  • EN 10204 3.1
  • Free sample
  • Mill Test Certificate
  • Storage Tanks
  • Low Pressure Vessels
  • Pressure Vessels
  • Heat Exchangers
  • Temperature Controlled Vessels
  • Boilers
Equivalents Testing Edges
  • S275J2G3
  • St 44-3U
  • 43 D
  • E28-4
  • Chemical Analysis
  • Intergranular Corrosion Test
  • Hardness Test
  • Flattening Test
  • Mechanical Testing
  • Flaring Test
  • Trimmed edge
  • Round edge
  • corners
  • Cutting edge
  • Mill edge
  • Slit edge
  • Deburred edge
  • Square edge/ with rounded
Origin Cutting Transport
  • Indian
  • Japanese
  • European
  • US
  • Taiwan
  • Korea
  • Waterjet
  • Plasma
  • Laser
  • Oxy-propane Flame
  • By Sea
  • By Air
Package Min Impact Energy Surface Finish
Carton, wooden pallet, brown paper, wooden cases 27J Mill finish, painted
Tensile Strength Elongation Yield Strength
410Mpa 23% Min 250Mpa
Features Method of machining Hardness
  • Good dimensional accuracy
  • High yield strength
  • possess good toughness
  • High tensile strength
  • High weldability
  • Heat treatable
  • Tapping and Threading
  • Sawing and Cutting Off
  • Turning
  • Milling
  • Drilling
  • Grinding
  • Planning and Shaping
  • Reaming
  • Half Hard
  • Soft
  • Quarter Hard
  • Hard
  • Spring Hard


Get one of the largest e250 steel plate stockists and importers in the Middle East and Asia with a full set of mill test reports, see the chemical composition and e250 vs e350

When comparing both the grades, chemical composition and mechanical properties are the only factors that separates the two.

When comparing the two on the basis of chemical composition, IS 2062 E250 chemical composition comprise higher carbon contents than the E350 grades.

On the other hand, when considering the mechanical properties, steel plates of grade E350 have comparatively higher yield and tensile strength.

Discover the best traders who keep is 2062 e250 plate and sheet in stock in a wide range of sizes and thicknesses in Dubai, see e250 grade steel mechanical properties/melting point

IS 2062 E250 plates comprise max of 1.5% of manganese, max 0.22% carbon, max 0.045-0.050% sulphur and 0.040-0.045% phosphorous contents.

The presence of carbon contents is the only indication for it to show excellent strength characteristics. They show 410 MPa of tensile strength and yield strength of 250 MPa.

On the other hand, it is moderately recommended for use case in applications for dealing with moderate strength and pressure conditions scenarios.

Deal with distributors who provide is 2062 e250c plate along with associated processing services at a discounted price, check is 2062 e250 grade c vs grade b/ properties

When coming to the grades A and C of IS 2062 E250 carbon steel plates, you would get to see one difference.

For grades A, you do not require any testing. But for C grades, there is mandatory test that is conducted at temperature conditions of -200C. Also, semi-killing of deoxidations can take place, whereas it is fully killed in the case of grade C.

Find a wholesaler who keeps a ready stock of is 2062 e250 mild steel plate with the aim that all goods will be dispatched within 1-3 days. See equivalents

MS plates IS 2062 E250 offers excellent strength characteristics. This is one of the reason why it is recommended in:

  • As an ideal use case for the heat exchangers.
  • Low pressure vessels also demand for such plates.
  • For appreciable temperature tolerance, they are also recommended in temperature controlled vessels.
  • Storage tanks also demand for its wide use case.

IS 2062 E250 steel plate equivalent material, mechanical properties and chemical composition

IS 2062 E250 Steel Plate Properties