A105 gate valve manufacturer in India

Manufacturer of

Gate valves are used in the oil and gas sectors to control the flow of fluids by either allowing or obstructing them. An ASTM A105 gate valve uses forged carbon steel material. The basic design uses a wedge in the fluid path. It can be round or rectangular. Notably, these components are not used for flow regulation as much as switching it on and shut.

The chemical composition is manganese, phosphorus, silicon, copper, nickel, chromium, molybdenum, sulfur, vanadium, and carbon. The stellar properties of these fittings include superior mechanical properties and strength. They can also handle abrasive environments.

Avesta Steels can supply ASTM A105 gate valves in sizes ranging from 2″ to 48″. These valves also get used in the petroleum and petrochemical industries. Their ability to handle high temperatures and pressures (150lbs to 2500lbs) lends them widespread industrial utility.

Avesta Steels is a trusted manufacturer of A105 gate valves. It supplies components of different types per client needs, like parallel and wedge-shaped. Typically, gate valves are multiturn-based, i.e., they require multiple turns to shut off the fluid flow. They use a slow operation to avoid water hammering and avoid abrupt pressure changes.

Customers can order these valves for different fluids, like water, seawater, sewage, wastewater, oil, etc. They are suitable for potable water and neutral liquids. These components can also work with pigs for pipe cleaning as the fluid flow path has no obstruction.

ASTM A105n sluice valve and uns k03504 knife gate valve exporter in India

Sluice valves are essentially gate valves and commonly utilized for flow control in many industrial setups. ASTM A105N sluice valves use normalized carbon steel to operate in high temperatures. Avesta Steels exports these components to countries globally.

Knife gate valves are highly advantageous for industries exposed to corrosive agents. They comprise a blade that lets them cut through slurries, viscous liquids, etc. They work better than gate valves in environments filled with suspended solid particles. They originally served the paper industries but now get employed in wastewater treatment, mining, and cement plants. UNS K03504 refers to the UNS number (Unified Numbering System) for ASTM A105 carbon steel forgings.

ASTM A105 carbon steel slide gate valve supplier in Mumbai, maximum temperature limits of a105 valves are -29 to 425 °C

Slide gate valves get coveted for their simple operation and compatibility with dry bulk materials. ASTM A105 carbon steel slide gate valves use a flat plate that slides into the flow and shuts it off. These components often keep the plate on a column and restrict access in the industrial environment.

These valves are appropriate for low- and high-temperature applications. The standard operating range is -29 °C to 425 °C. These superior thermal properties stem from the chemical composition of the material. It can undergo desired heat treatments like quenching, normalizing, etc., if required for the application.

CS astm a105 sluice gate valve and a105n wedge valve are used for on/off and fluids control

Avesta Steels deals in different valves for fluid control and turning the flow on and off. CS ASTM A105 sluice gate valves put an obstruction in the fluid path to manage the flow. It is another name for a gate valve and is the most widely used valve across several industries. It is simple to install and operate, which adds to its popularity.

A105N wedge valves use normalized carbon steel material. This heat treatment makes the component suitable for high temperatures. These valves also get used to control fluid flow, but they can seal tighter than gate valves in high-pressure applications. These components rely on a wedge-shaped fitting to block the fluid flow. They tend to be more expensive and require a higher torque for operation.

A105n carbon steel wedge gate valve are available in threaded & socket weld end as per BS5352/ API 602 standard

Clients can order A105N carbon steel wedge gate valves in two main types: threaded and welded. The choice will depend on the application needs and the budget. Generally, threaded gate valves come in two forms: rising stem and non-rising stem. Rising stem components get fixed to the gate while the latter is threaded. Their most common application is in petrochemicals and gas processing.

Avesta Steel produces these valves adhering to the BS5352 or API 602 standard. This specification covers forged steel gate valves of 4″ or less in size. The pressure rating for these valves is Class 150 to 2500, while the standard dimensions are NPS 1/4 to NPS 3. API 602 also covers parameters for design, materials, etc.

Photo Gallery

export@avestasteels.com