ASTM A106 gr b sch 40 erw pipe supplier in India

Supplier of

EEMUA 158 and NORSOK standards ASTM A106 gr b sch 40 erw pipe supplier in India, offers SA 106 grade b seamless and welded pipe with hydrostatic testing as per MIL-P-24691/ MIL-P-24691/1

Industries like shipbuilding, petrochemicals, and construction require components with good corrosion resistance and load strength. A106 Grade B SC 40 piping is a good choice for these sectors. It is a carbon steel material that also contains manganese and silicon. It is a sturdy material with a tensile strength of 415 MPa and yield strength of 240 MPa.

Manufacturers can produce these pipes via ERW (Electric Resistance Welded) or seamlessly. The standard wall thickness of these pipes is 6.02mm. The outside diameter is 114.3mm. Neelcon Steel supplies these pipes in nominal pipe sizes of ¼” to 32″.

Some industrial applications like construction, agriculture, and scaffolding demand high dimensional accuracy and impact toughness. ERW pipes, manufactured via electric resistance welding, are perfect in these cases. ASTM A106 Grade B SCH 40 ERW pipes comprise carbon steel with other elements like manganese, phosphorus, and 0.05% sulphur. These pipes can tolerate a temperature range of -20 to 400 degrees Fahrenheit. They work excellently in transmitting slurries, water, etc., and require minimal maintenance.

The company ensures the piping undergoes thorough testing via non-destructive techniques like hydrostatic methods. It also confirms the products meet the desired chemical and metallurgical properties via cold rolling.

SA 106 gr b welded pipe and A106 gr b large diameter pipe exporter in Mumbai

What is a106 gr b sch 40?

Industries like shipbuilding, petrochemicals, and construction require components with good corrosion resistance and load strength. A106 Grade B SC 40 piping is a good choice for these sectors. It is a carbon steel material that also contains manganese and silicon. It is a sturdy material with a tensile strength of 415 MPa and yield strength of 240 MPa.

Manufacturers can produce these pipes via ERW (Electric Resistance Welded) or seamlessly. The standard wall thickness of these pipes is 6.02mm. The outside diameter is 114.3mm. Neelcon Steel supplies these pipes in nominal pipe sizes of ¼” to 32″.

A106 carbon steel pipe and SA 106 material stockist in India

ASTM A106 gr b sch 40 erw pipe supplier in India

Some industrial applications like construction, agriculture, and scaffolding demand high dimensional accuracy and impact toughness. ERW pipes, manufactured via electric resistance welding, are perfect in these cases.

ASTM A106 Grade B SCH 40 ERW pipes comprise carbon steel with other elements like manganese, phosphorus, and 0.05% sulphur. These pipes can tolerate a temperature range of -20 to 400 degrees Fahrenheit. They work excellently in transmitting slurries, water, etc., and require minimal maintenance.

The company ensures the piping undergoes thorough testing via non-destructive techniques like hydrostatic methods. It also confirms the products meet the desired chemical and metallurgical properties via cold rolling.

Carbon steel astm a106 galvanized pipe in various diameters & thickness

SA 106 gr b welded pipe and a 106 gr b large diameter pipe exporter in Mumbai: 3 major differences between SA 106 gr b & SA 106 gr c

You can acquire SA 106 material in three grades of A to C. The essential difference lies in the carbon content. SA 106 Grade B has more carbon than Grade A (0.30% as opposed to 0.25%) and is, therefore, more in tensile strength. However, SA 106 Grade C can have up to 0.35% carbon. It also has the highest tensile strength.

The two grades also differ in the minimum yield strength. Grade B rates at 240 MPa, but Grade C has the highest minimum yield strength of 275 MPa.

Finally, the percentage elongation reduces from Grade A to Grade C. This difference also stems from the carbon content since the remaining chemical composition, i.e., amounts of molybdenum, nickel, etc., is almost identical.

A106 seamless pipe are available in schedule 40/ 60/ XXS

A106 carbon steel pipe and SA 106 material stockist in India: What is a106 gr b temperature range? What are its uses and applications?

A106 Grade B refers to the standard specification for carbon steel pipes used for high-temperature applications. This piping is generally seamless. It works in a temperature range of 100 degrees to 750 degrees Fahrenheit. However, this material can work in as low as -20 degrees Fahrenheit. Neelcon Steel is an established stockist of these pipes and caters to an impressive clientele.

The fitment for severe temperatures makes A106 Grade B pipes suitable for pipeline systems that transmit oil, gas, and mineral slurries. They also work in transmission lines for boilers, marine industries, refineries, and construction.

Carbon steel astm a106 galvanized pipe in various diameters & thicknesses: What is a106 equivalent material? What is astm a106 equivalent Indian standard?

A106 is a widely used carbon steel material referring to seamless pipes for high-temperature applications. Many suppliers choose to galvanize these products for a protective zinc coating that grants enhanced corrosion resistance. Neelcon Steel has a vast repository of products adhering to this grade.

If you don’t find products adhering to this specification, you can use ASTM A53 Grade B. It is helpful for regular mechanical applications in normal pressure conditions. Like A106, this material also exhibits strength and ductility. Another equivalent is API 5L B. It is an excellent choice for transporting petroleum and natural gas.

A106 seamless pipe is available in schedule 40/ 60/ XXS: What are the tolerances for A106 pipe?

The criteria for tolerances for A106 pipe get specified in the corresponding specifications. The ASTM standard (ASME B36.10M) requires that the minimum wall thickness mustn’t be over 12.5% less than the wall thickness. The tolerance in mass requires that the length not vary more than the 3.5 to 10% range.

Finally, the metric for the outside diameter gets specified in the manufacturers’ tables for the corresponding product. For instance, the variation can be 0.4mm over and under for a pipe measuring 1/8 to 1 1/2 inches.

Neelcon Steel can supply these pipes in different schedules (40, 60, or XXS) based on the requirement.

Accreditations and Certifications

Photo Gallery

info@neelconsteel.com