Low temperature carbon steel pipes

Low Temperature Carbon Steel Pipes

Low temperature steel pipe are recommended for use case in welded pressure vessel because of comparatively medium magnesium and carbon contents. Adding to this, they comprise a structure which is fine grain; in association with the carbide precipitation that is uniform.

Verified Supplier

Verified stockists and wholesalers

available 10 cars

Trustworthy low-temp carbon steel pipe suppliers in UAE, check grades

Low temperature carbon steel pipes specifications


Low Temperature Carbon Steel Pipes Specification

Contact the dependable low temperature carbon steel pipes suppliers in the UAE listed above for bespoke sizes.
LTCS carbon steel pipe and tube sizes LTCS steel pipe OD LTCS seam welded pipe wall thickness
  • Pipe: 1 / 2” to 36” NB
  • Tube: 1/2” to 6”
13.72 to 914.4 mm
  • SCH5 – SCH160
  • 1.24mm up to 1 inch
Low temperature carbon steel seamless pipe sizes Low temp carbon steel welded pipe size A333 low temp tube indian standards
  • OD: 10.3- 610mm
  • Longest length:12000mm
  • Wall Thickness: 1.0-40mm
  • Wall Thickness: 2.5-20mm
  • OD: 21.3-2540mm
  • Longest length:12000mm

 

  • IS 1239 IS 3589 IS 4923 IS 3601
Carbon steel low temperature tubing length SA333 seamless tube coating ASTM A333 exhaust tubing standards
  • DRL
  • SRL
  • 40FT
  • 20FT
  • From 5 – 18 meters
  • Custom
  • Polyethylene layers
  • 3LPE/3PE coating
  • Soild CRA
  • Varnished
  • Blacking painting
  • 3pp
  • FBE
  • Zinc
  • Clad or Lined alloy steel
  • ASTM A53 B
  • ASTM A106 Gr. B
  • ASTM A333
  • ASME SA 333
  • API 5L Gr B to X70
Low temperature steel annealed pipe density Carbon steel LTCS welded tube melting point LTCS carbon steel exhaust pipe temperature range
7.85 g/cm3 1410°C 560-600°C
LTCS cold drawn pipe BS standards LTCS steel pipe ASTM Standard Low temperature carbon steel CS pipe classification
  • BS 3601
  • BS 1965-1
  • BS 1387
  • ASTM A333
  • ASME SA 333
  • Low carbon steel: 0.05% – 0.25% carbon
  • High carbon steel: 0.5% – less than 2% carbon
  • Medium carbon steel: 0.25% – 0.5% carbon
Low temp carbon steel pipe grades A333 low temp pipes and tubes manufacturing types Carbon steel low temperature round pipe finish
  • DOM
  • Redrawn
  • CEW
  • Fabricated
  • Seamless
  • EFW
  • LSAW
  • ERW
  • Seam-Welded
  • Welded
  • CDW
  • Annealing
  • Pickling
  • Hair line
  • Custom
  • Mill finish
  • Cold finish
  • Bright
  • Polished
  • Mirror
  • Brush
  • Sand blast
SA333 extruded tube expansion coefficient ASTM A333 cold finished pipe yield strength Low temperature steel hot finished pipe joining methods
(10.8 – 12.5) X 10-6 m/ (m °C). 240 MPa
  • Flange connection
  • Live joint connection
  • Special pipe joint connection
Carbon steel LTCS pipes form Most popular LTCS carbon steel pipe and tube types Manufacturing methods of LTCS pipes
  • Coiled
  • Straight
  • Round
  • Rectangular
  • Square
  • Hollow
  • U Shape
  • Pan Cake Coils
  • LTCS carbon steel seamless pipe
  • A333 low temp annealed pipe
  • LTCS round pipe
  • LTCS steel square pipe
  • Low temperature carbon steel rectangular pipe

Compare our response times and prices with those of comparable low temperature carbon steel pipes stockists.

  • Hot formed
  • Cold formed
  • Cold drawn
  • Precision rolled
LTCS steel redrawn tube services Low temperature carbon steel bright annealed pipe length Supply low temp carbon steel round pipe in following brand
  • Threading
  • Welding
  • Cut-to-length services
  • Machining
  • Beveling

Use chat or email to communicate directly with the low temperature carbon steel pipes stockists, stockholder,
and distributors of these services.

  • Single
  • Double Random
  • Cut Length
  • Standard
  • Tenaris
  • Baosteel
  • NSSMC
  • Jindal
  • Valourec & Mannesman
  • United seamless limited
  • MSL
  • ISMT
  • Lontrin
A333 low temp rectangular pipe weight calculator formula Certification of carbon steel low temperature square pipe SA333 annealed tube features
Wt/Ft = 10.69*(OD – Wall Thickness)*Wall Thickness.
  • Moisture testing report
  • Heat treatment charts
  • DFARS compliant
  • Surface roughness measurement
  • HS code commercial invoice
  • MTC EN 10204 3.1, 3.2
  • Fumigation certificates
  • Raw materials certificate
  • Third party inspection report
  • Laboratory test certificate from Govt. approved lab
  • Form a for generalized system of preferences (GSP
  • Moderate strength
  • Toughness
  • Corrosion resistance
  • Superior dimensional accuracy.
ASTM A333 solution annealed pipe marking Low temperature steel square tubing welding method Carbon steel LTCS hot finished seamless pipe applications
  • Specification
  • Material grade
  • Nominal size
  • Schedule or wall thickness
  • Method of manufacturing (Seamless / Welded)
  • Heat number
  • Manufacturer’s name or custom logo – on request
  • Brazing
  • Tack welding
  • Gas-shielded tungsten arc (TIG or GTAW)
  • Gas-shielded metal arc (MIG or GMAW)
  • Manual metal arc (MMA or SMAW)
  • Energy industries
  • Power plants
  • Textile machinery
  • Pulp and paper industry
  • Oil and gas industry

These low temperature carbon steel pipes suppliers have been supplying A333 low temp to Saudi Arabia, Kuwait,
Qatar and Namibia, Mauritius, Swaziland for more than five years. The physical verification of this supply has
been confirmed.

LTCS carbon steel pipe and tube AMS LTCS pipes maximum operating temperature Hardness range of LTCS steel seamless pipe
AMS 6360 -20°F and -50°F HRC22 ~ 34.
Low temperature carbon steel welded pipe packaging Low temp carbon steel pipe inspection plan A333 low temp seamless tube end type
  • Special crates for with each radius separated
  • Bundles (hexagonal)
  • Crates (steel/wooden)
  • Wooden Boxes
  • PE fabric bundles
  • Wrapped in plastic or standard seaworthy export packing
  • Custom
  • Hydrotesting
  • Geometric accuracy
  • Liquid penetrant examination
  • Ultrasonic gaging
  • Radiographic inspection
  • And most important dimensional checking

Keep in touch with the distributors, dealers, and low temperature carbon steel pipes stockists listed above
for above test.

  • Grooved ends
  • BE: bevel end
  • BBE: Bevel both ends
  • BLE: Bevel large end
  • PE: Plain end
  • PBE: Plain both ends
  • POE: Plain one end
  • Plain ends (PE)
  • Threaded ends (TE)
  • Bevelled ends (BW)
  • BOE: Bevel one end
  • BSE: Bevel small end
  • BW: Buttweld end
  • TE: Thread end
  • TBE: Thread both ends
  • TLE: Thread large end
  • TOE: Thread one end
  • TSE: Thread small end
Carbon steel low temperature pipe equipment SA333 clad pipe documentation offered ASTM A333 welded tube delivery time
  • Bending machine
  • Electric bevelling machine
  • Press machine
  • Pushing machine
  • Sand-blasting machine
  • Copy of packing list indicating details of sizes, quantity, weight, thickness etc.
  • Country of origin certificate (Original)
  • Copy of invoice
  • Manufacturer’s mill test certificate certifying, heat no, finish, chemical composition, grade etc.,
  • Bill of lading.
  • Generally it is 7-10 days if its in stock
  • 15-20 days if its not in stock
Low temperature steel cold drawn pipe SWG Get carbon steel LTCS pipe suppliers with below approval Carbon steel LTCS hot finished seamless pipe transport
  • 10 Swg.
  • 12 Swg.
  • 14 Swg.
  • 16 Swg.
  • 18 Swg.
  • 20 Swg.
  • KOC
  • ADNCO
  • SABIC
  • Aramco
  • ALBA
  • QAFCO
  • MAADEN
  • KNPC
  • Qatar Petroleum
  • ORPIC
  • NPDC
  • PETRONAS
  • EGPC
  • By road : Truck / Train
  • By air – Freighter civil passenger and cargo planes
  • By sea – FCL / Break-bulk CV /LCL /
    40,20 and 45 feet container /High cube container /
    Open top containers

No minimum order quantity! Meet prominent stockists of LTCS pipe in the Middle East, offer a huge selection to shop online to save money, check the min. temperature range

LTCS pipe price

Thickness Price USD/UNIT Price AED/UNIT Price OMR/UNIT
2NB X SCH-80,DRL US $ 13.30 AED 48.85 OMR 5.12
8NB X SCH- 40,SRL US $ 61.87 AED 227.22 OMR 23.80
2 NB X SCH-80,SRL US $ 12.55 AED 46.09 OMR 4.83

Various types of carbon steel LTCS pipe

ASTM A333 seamless pipe

ASTM A333 seamless pipe

Carbon steel LTCS welded pipe

Carbon steel LTCS welded pipe

SA333 tube

SA333 tube

LTCS carbon steel tubing

LTCS carbon steel tubing

LTCS seamless tube

LTCS seamless tube

LTCS steel welded tube

LTCS steel welded tube

Low temperature carbon steel exhaust tubing

Low temperature carbon steel exhaust tubing

Low temp carbon steel seam welded pipe

Low temp carbon steel seam welded pipe

A333 low temp annealed pipe

A333 low temp annealed pipe

Carbon steel low temperature clad pipe

Carbon steel low temperature clad pipe

SA333 exhaust pipe

SA333 exhaust pipe

ASTM A333 annealed tube

ASTM A333 annealed tube

Low temperature steel extruded tube

Low temperature steel extruded tube

Carbon steel LTCS cold drawn pipe

Carbon steel LTCS cold drawn pipe

LTCS carbon steel cold finished pipe

LTCS carbon steel cold finished pipe

LTCS redrawn tube

LTCS redrawn tube

LTCS steel square tubing

LTCS steel square tubing

Low temperature carbon steel hot finished pipe

Low temperature carbon steel hot finished pipe

A333 low temp seam welded pipe

A333 low temp seam welded pipe

Low temp carbon steel round pipe

Low temp carbon steel round pipe

Carbon steel low temperature square pipe

Carbon steel low temperature square pipe

SA333 rectangular pipe

SA333 rectangular pipe

ASTM A333 bright annealed pipe

ASTM A333 bright annealed pipe

Low temperature steel solution annealed pipe

Low temperature steel solution annealed pipe

Carbon steel LTCS cold finished seamless pipe

Carbon steel LTCS cold finished seamless pipe

A333 low temp hot finished seamless pipe

A333 low temp hot finished seamless pipe

A333 low temp pipe grade chart

Low temprature carbon steel pipe grades
ASTM A333 Grade1
ASTM A334 Grade 1
ASTM A333 Grade 3
ASTM A333 Grade 6
ASTM A334 Grade 6

CVN impact test of LTCS carbon steel pipe

Grades Test temperature Min impact
Grade 1 -45 (C) -50 (F)
Grade 6 -45 (C) -50 (F)

Low carbon steel vs Carbon steel

 Low carbon steel  Carbon steel
Composition Iron, carbon, and manganese are the ingredients of low-carbon steel. Although it can reach up to 0.3%, the
carbon content is usually less than 0.25%.
Is constructed from silicon, carbon, and iron. The typical range for the carbon content is 0.4% to 2%.
Properties Compared to carbon steel, low-carbon steel is weaker and softer. Moreover, it is more ductile, which
facilitates shaping into desired shapes.
Compared to low-carbon steel, carbon steel is stronger and harder. Additionally, it is less ductile, which
makes shaping it into shapes more challenging.
Uses Low-carbon steel is generally utilized in pipe and wire products, or other applications where strength is not
a need.
Carbon steel is frequently used for robust and long-lasting equipment and machine parts, as well as structural
uses like bridges and buildings.
Cost The cost of low-carbon steel is lower. The cost of carbon steel is higher.
Environmental Impact Low-carbon steel is less harmful to the environment. Carbon steel is more harmful to the environment.

LTCS steel pipe chemical composition

Grade CR MO P S C MN SI NI CU V CO NB AL
1 / / 0.025 max 0.025 max 0.30 max 0.40-1.06 / / / / / / /
3 / / 0.025 max 0.025 max 0.19 max 0.31-0.64 0.18-0.37 3.18-3.82 / / / / /
4 0.44-1.01 / 0.025 max 0.025 max 0.12 max 0.50-1.05 0.08-0.37 0.47-0.98 / 0.40-0.75 / / 0.04-0.30
6 / / 0.025 max 0.025 max 0.30 max 0.29-1.06 0.10 min / / / / / /
7 / / 0.025 max 0.025 max 0.19 max 0.90 max 0.13-0.32 2.03-2.57 / / / / /
8 / / 0.025 max 0.025 max 0.13 max 0.90 max 0.13-0.32 8.40-9.60 / / / / /
9 / / 0.025 max 0.025 max 0.20 max 0.40-1.06 / 1.60-2.24 0.75-1.25 / / / /
10 0.15 max 0.05 max 0.035 max 0.015 max 0.20 max 1.15-1.50 0.10-0.35 0.25 max 0.15 max 0.12 max / 0.05 max 0.06 max
11 0.50 max 0.50 max 0.025 max 0.025 max 0.10 max 0.60 max 0.35 max 35.0-37.0 / / 0.50 max / /

Mechanical properties of pipe LTCS

ASTM A333 PIPE Yield Strength
(Mpa)
Tensile Strength (Mpa) Elongation X Elongation Y
Grade 1 ≥205 ≥380 ≥25 ≥35
Grade 3 ≥240 ≥450 ≥20 ≥30
Grade 4 ≥240 ≥415 ≥16.5 ≥30
Grade 6 ≥240 ≥415 ≥16.5 ≥30
Grade 7 ≥240 ≥450 ≥22 ≥30
Grade 8 ≥515 ≥690 ≥22
Grade 9 ≥315 ≥435 ≥28
Grade 10 ≥450 ≥550 ≥22
Grade 11 ≥240 ≥450 ≥18

SA333 pipe equivalent grade chart

Standards Country ASTM A333 grade 3 pipe ASTM A333 grade 6 pipe
UNS North America
WNR Russia 17178
ASTM America ASTM A333 ASTM A333
ASME Australia ASME SA 333 ASME SA 333
JIS Japan
BS United Kingdom NFA A 36-2051
GOST Russia
AFNOR France
EN Europe EN 10216-4
AMS United States
ANSI America
SAE United States
AS Australia
DIN German DIN 17178

Location of delivery and timing of shipment for carbon steel LTCS seamless
tube

Export to Variations in price and the scheduled delivery
Switzerland 5 % extra | 45 to 60 days
Slovakia 5 % extra | 45 to 60 days
Finland 5 % extra | 45 to 60 days
Ireland 5 % extra | 60 days
Croatia 5 % extra | 60 days
Slovenia 5 % extra | 60 days
Malta 5 % extra | 60 days
Singapore 5 % extra | 8 days
Malaysia 5 % extra | 7 days
Indonesia 5 % extra | 7 days

Negotiate prices for different types of low temperature steel pipe from various traders, see material list/thickness chart

There are industrial standards that face difficulty in the price quotation of low-temperature carbon steel pipe based on dimensional aspects and the types of this material. Different types and dimensional factors, show different and unique properties, associated with differing use case.

Ideally, you would get to see size range of the pipe between 1/2’’-24’. Also, each type of this grade of pipe shows unique characteristics. So, variations are also seen in this case.

Worried browsing tons of suppliers to get best quality standards and cost effective low temp carbon steel pipe, it is highly advised to the customers to approach the suppliers that quote reasonable pricing with quality assured services.

Following the same criteria, the listed suppliers of pipingmaterial.ae also assure you these services. Here:

  • Top notch priority is provided to the customer’s demands and standards.
  • Suppliers provide custom dimensions for their products, with affording prices. In this way, customers can be assured best alternatives that can suffice their demands and standards.
  • Need priority delivery? The contact details of the suppliers are open to customers for free. Hence, customers can now place their demands and standards accordingly.

These are some superior reasons why they are the leading and top notch low temperature carbon steel pipe suppliers in UAE.

Also, you would get to see the below mentioned grades of this product:

  • ASTM A333 grade 1.
  • ASTM A333 grade 3.
  • ASTM A333 grade 6.
  • ASTM A334 grade 1.
  • ASTM A334 grade 6.

Stockists of LTCS pipe aim to provide the products only on the basis of the standards that the customer places. Other than this, if there prevails any hindrance or confusions, they even guide customers with best tips and suggestion.

Following this, it is also important for the industrial standards to also check for the suitability of the material based on temperature conditions. Ideal temperature conditions that are favourable can go down to -45.50-6500C.

Carbon steel LTCS pipe is available to buy with custom specifications in Dubai. Get a quote now !! see low temp CS vs carbon steel

You would easily get price quotations for carbon steel LTCS pipe with custom dimensions specified by the customers.

But be sure from your end that the dimensional aspects that you specify must be in accordance with material standards ASME SA 333. It covers on its utilization in low temperature conditions. For this, accurate dimensions are needed, or non-degraded performance is seen.

Adding to this, carbon steel is manufactured with the aim to exhibit moderate strength characteristics. On the other hand, low temp cs do not require strength, due to the presence of magnesium contents.

Reach out to the Low-temperature carbon steel pipe supplier of Jindal, TISCO, Baosteel, JFE, and NSSMC in GCC Countries, see welding procedure

It is very ideal to also check out for the welding procedures that are associated with this pipe.

One can easily weld it with the help of the conventional methods mentioned below:

  • Arc welding
  • Submerged arc
  • Melting electrode argon arc

Out of these, arc welding is considered to be one of the most common welding techniques. This is because it is flexible to be applicable in various positions of welding. Very important factor to be kept in mind is that avoid using excessive welding heat input. It must be in the range of 18-30KJ/cm.

Low Temperature Carbon Steel Pipes chemical composition and mechanical properties


Low Temperature Carbon Steel Pipes Properties

Other popular grades