Monel check valve

Monel check valve

A material that is widely used for resisting corrosive environments is Alloy 400 check valve. Adding to this, they are recommended for use case in marine applications mainly because of their utilizations in non-oxidizing chlorine solutions. Also, the suitable temperature conditions suitable for this material is 5500C.

Verified Supplier

Verified Stockists (Contact directly for best price)

available 10 cars

Alloy 400 and K500 spring check valve suppliers in UAE

Get the top notch and best quality assured Monel k500 check valve at cost efficient alternatives from the listed suppliers and manufacturers. Make sure that the product complies with the material standards.

Similar services are provided by the suppliers at pipingmaterial.ae. At this B2B platform, you would reasonably pricing quotations, based on the standards that customers place. For them, the requirements of customer are top notch priority.

Worried on product genuineness? No need to worry as the suppliers are 100% genuine and trusted. Adding to this, customers are guided and welcomed with the best tips and suggestion; if they have any queries or confusions.

These are some of the reasons, why they dominate industrial applications with their effective and efficient services, making them the top notch and best Monel check valve suppliers in UAE.

Specification of monel check valve


Monel Check Valve Specification

Size Range End Connections Pressure Rating
6 milimeter to 50 milimeter
  • Flanged
  • Screwed
  • Tube
  • Butt weld
  • Socket weld
1500 PSI – 20000 PSI
Temperature Equivalents Application
-20°C to 200°C
  • UNS N04400
  • UNS N05500
  • Petrochemical plant
  • Power plant
  • Water treatment plant
  • Refinery
Below listed alloy 400 check valve Suppliers also stock following brands Threads Types
  • Amco
  • Amtech
  • AUDCO
  • BHEL
  • Kirloskar
  • Spirax
  • KSB
  • Hyper
  • L & T
  • NPT
  • BSP
  • BSPT
  • Swing
  • Duel Plate
  • Wafer Type
  • Disc
  • Flap Type
Cautions Media Seal types
  • Ease of manufacture
  • Cost effectiveness
  • Water
  • Oil
  • Gas
  • EPDM
  • FPM
  • NBR
  • PTFE
  • FEP
Mechanical properties List of projects where below listed monel 400 check valve Manufacturers has supplied Standards
  • Density: 8.44 g/cm3
  • Melting Point: 1350 °C
  • Tensile Strength: 550 Mpa
  • Yield Strength: 240 Mpa
  • Revithoussa LNG Terminal – Greece
  • Mina Al-Ahmadi Refinery – Kuwait
  • Dahej LNG Terminal -India
  • Aden Refinery – Yemen
  • Jeddah Refinery – Saudi Arabia
  • ASME B16.34
  • EN 1074 – 3
  • API 6D
Types of monel check valve Operation Parts
  • Monel swing check valves
  • Monel 400 lift check valves
  • Monel spring non-slam check valves
  • Monel k500 tilting disc check valves
  • Alloy 400 low pressure check valve
  • Monel inline check valve
  • ASTM b164 UNS N04400 dual plate check valve
  • DIN 2.4360 double check valve
  • UNS N04400 wafer check valve
  • NS N04400 flanged check valve
  • Electric
  • Manual
  • Pneumatic
  • Washer
  • Body
  • Body Seats
  • Cover Plate
  • Gasket
  • Hinge
  • Nuts

Buy Monel inline check valves at affordable prices from certified ASTM b164 uns n04400 inline check valves manufacturers in the middle east and India

Guidelines are provided by the manufacturers for ASTM B164 UNS N04400 inline check valves. For instance, if customers need installation guidelines for this material, it is provided without a single issue.

In ideal use case, it covers for how Monel inline check valves is installed with the aim to prevent backward flow of water. Hence, they are widely demanded especially by the piping applications. Not only this, the installation guidelines are in compliance with material standards ASTM B164 UNS N04400. So, check out for the benefits one can grab from this data, to cover wide range of industrial applications, and then demand for pricing.

Monel 400 check valve complied with NACE MR 0175/ iso 15156 standards, parker/ Swagelok equivalent din 2.4360 threaded check valve at lowest price in Dubai

Monel 400 check valve complied with NACE MR 0175/ iso 15156 standards, parker/ Swagelok equivalent din 2.4360 threaded check valve at lowest price in Dubai

Before purchasing, it is important for the customers to check for the product genuineness. Ideally, Monel 400 check valve are manufactured as per the NACE MR 0175 or ISO 15156 standards.

These standards help achieve product genuineness, as it covers for material suitability and how hydrogen sulphide environments are a risk factor for stress corrosion cracking.

For the best deal and guaranteed high quality of Monel inline check valves in Sharjah, get a quotation directly from Monel 400 check valve manufacturers.

Aim of most listed manufacturers who provide Monel spring check valve is to cover beneficial aspects. They supply this material to those industries that can deal with resistance to salt solutions.

Hence, DIN 2.4360 threaded check valve are widely demanded by marine applications and piping systems. They also show leak proof performance. There are other many benefits, which industrial standards must first check; while seeing the price quotations. Only then can you get a best quality and long term performance.

Are you looking for uns n04400 spring check valve dealers in GCC countries? Find very few but genuine stockist of Monel poppet check valve who offers various sizes at the cheapest price in Bahrain

UNS N04400 spring check valves are ideally available in 6mm-50mm size range. If the customers demand for the custom dimensions, then it is highly advisable for the customers to approach the listed stockists; who quoted reasonable pricing based on the standards set by the customers. Make sure that it also complies with material standards too.

Monel inline check valves chemical and mechanical properties


Monel Check Valve Properties