Monel plate

monel plate

6 out of 10 buyers in the UAE recommend pipingmaterial.ae and there are a few convincing reasons for the popularity of our site. Firstly, at pipingmaterial.ae, we don’t believe in listing thousand and one supplier and confusing our buyers in their decisions. On the pipingmaterial.ae website, we list only the top 5-10 verified suppliers for each product category to ease the buying process for our customers.

Also, pipingmaterial.ae website was not brought forth with the sole purpose of connecting buyers to suppliers. No doubt, you can get the accurate contact details of suppliers and compare different price quotes from our website. However, apart from that, our pipingmaterial.ae website contains in-depth articles and blogs on different products to guide buyers and inform them.

Verified Supplier

Verified Stockists (Contact directly for instant quote)

available 5 cars

Interested in purchasing from Monel sheet suppliers in UAE in all finishes at affordable costs? Buy here and compare Inconel vs Monel plate

Complete information for Monel sheet grade

Note: Below information is taken from trusted resourse

Grade ASTM AMS WNR Temprature Strength Nickel content Lifespan
Monel 400
  • ASTM B127
  • ASME SB127
AMS 4544 WNR 2.4360
  • 1000°F
  • 538°C
  • Yeild: 172-345 MPa
  • Tensile: 517-620 MPa
66.5% 25 to 35 years
Monel k500
  • ASTM B127
  • ASME SB127
WNR  2.4375
  • 1600°F
  • 870°C
  • Yeild: 690 MPa
  • Tensile: 965 MPa
63% 25 to 35 years

Are you looking for stockists and importers of Monel sheet metal, strips and coils in the Middle East and Africa? You come to the right place, view grades

Monel plate technical specification


Monel Plate Specification

For larger sizes, please contact the Monel plate suppliers listed above in the United Arab Emirates.
Manufacturing size range of Monel alloy plate/ sheet Monel alloy strip sizes ASME SB127 Monel plate Edges
  • Thickness: 0.3 to 20 mm
  • Width: 1000 to 20000 mm
  • Length: 200 to 600 mm
  • Gauge: 28
  • Width: 30″ to 240″
  • Length: 200mm – 6000mm
  • Slit edge
  • Rolled edge
ASTM B127 Monel sheet AMS ASTM Standard of Monel coil Monel alloy foil density
  • 4544
  • ASTM B127
  • 8.8 g/cm3
Operating temperature of Monel annealed plate ASME SB127 Monel shim sheet melting point Temperature range of ASTM B127 Monel clad plate
  • Up to 538°C
  • 1300 – 1350°C
  • Up to 480°C
Monel alloy sheet grades Hardness range of Monel strips ASME SB127 Monel coil elongation
  • 65 Rockwell B
  • 45 % – 30 %
ASTM B127 Monel strip surface finish classes Types of ASME SB127 Monel rolling plate Manufacturing technique of Monel alloy plate
  • Class A : finest finish
  • Class B: slightly less fine finish
  • Class C : most basic finish
  • Monel metal clad plate
  • ASTM B127 Monel Plate
  • Monel steel Rolls
  • ASME SB127 Monel Strips
  • K-Monel coil
  • Monel annealed plate
  • ASTM B127 Monel Foils
  • Monel metal Sheet
  • ASME SB127 Monel Shim sheet

Above ASTM B127 Monel coil stockist produce corresponds with customer drawings, contrast our cost and turnaround time with those of other Monel plate stockists.

  • Roll forming
  • Cold rolling
  • Hot rolling
Monel annealed plate features ASTM B127 Monel sheet welding method Supply Monel alloy clad plate in following brand
  • Corrosion resistance
  • Weldability
  • Outstanding heat resistance
  • Metallurgical stability
  • Strength
  • SAW
  • PLASMA
  • GTAW (TIG)
  • SMAW (MMA)
  • GMAW (MIG/MAG)
  • Nippon Yakin
  • ATI
  • Columbus Stainless
  • Outokumpu
  • Special Metals(SMC)
  • HAYNES International
  • VDM
  • Valbruna Stainless Steel
ASME SB127 Monel foil marking Monel alloy rolling plate finish ASTM B127 Monel sheet applications
  • Manufacturing date
  • Manufacturer logo / name
  • Origin of material
  • ASTM/ ASME standard
  • Sizes
  • Material grade
  • Matte
  • Sandblasted
  • Electroless nickel plating
  • Brushed
  • Mirror
  • Glossy
  • Gas Processing
  • Power Generation
  • Off-Shore Oil Drilling Companies
  • Petrochemicals
  • Specialty Chemicals
  • Pharmaceuticals

The Monel plate suppliers listed above are ex-stock and have supplied to numerous nations in the past, such as Namibia, Qatar, Saudi Arabia, Morocco, and Oman.

Monel sheet modulus of elasticity ASTM B127 Monel clad plate coefficient of thermal expansion Monel alloy coil velocity
  • 179 kN/mm2
  • 11.8 – 12.7 x 10-6 per °C
  • 2720 S-Wave Velocity m/s
ASME SB127 Monel hot-rolled plate documentation offered Monel strips welding electrode Cutting method of Monel alloy foil
  • Copy of Invoice
  • Copy of Packing List indicating details of Sizes, quantity, weight, thickness etc.
  • Manufacturer’s Mill Test Certificate certifying, Heat No, finish, Chemical Composition, Grade etc.,
  • Country of Origin Certificate (Original)
  • Bill of Lading.
  • MONEL welding electrode 190
  • Oxy-propane flame cutting
  • Plasma cutting
  • Laser cutting
  • Waterjet cutting

Direct contact with the above Monel plate distributors, dealers, and stockists specified for the above-mentioned cuts

Monel alloy rolling plate delivery time Certification of ASME SB127 Monel cold-rolled plate Monel sheet value added services
  • 7-10 days if its in stock
  • 15-20 days if its not in stock
  • Oman/ Qatar/ Saudi Arabia – 3-5 days (by Air / Ship)
  • EN 10204/3.1B
  • Certificate of Origin legalized
  • Third Party Inspection Report
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • Polishing
  • Edge preparation
  • Sawing
  • Bending
  • Shearing
  • Welding
  • Cutting to length
  • Slitting
  • Blanking
  • Mechanical processing

Use chat or email to get in direct contact with listed Monel plate stockists, stockholders, and distributors for these services.

ASTM B127 Monel plate packaging Monel alloy clad plate testing requirements ASME SB127 Monel rolling plate hardness type
  • Steel Strips Bundled
  • Customized Pallets
  • Wooden Pallets
  • Bubble wraps
  • Destructive test
  • Mechanical test
  • Nabl approved lab test
  • Third party inspection test
  • Flaring Test
  • Chemical test
  • Non destructive test pmi test
  • Visual inspection test
  • Half Hard
  • Quarter Hard
  • Soft
  • Spring Hard
  • Hard
Monel hot rolled plate processing Monel clad plate characteristics Electrical conductivity of Monel alloy rolling plate
  • Deburring
  • Grinding
  • Trepanning
  • Precision Rerolling
  • Boring
  • Heat Treating
  • Edging
  • Leveling
  • High strength
  • High resistance
  • Excellent high & low-temperature resistance
  • 34% IACS
Difference between plate, sheet & Foil
  • Sheet: 0.5mm upto 600 thick
  • Plate: 600 or thicker
  • Foil: less than 0.2mm thick

Thickness of Monel alloy sheet

3/16″ 4.8mm
1/4″ 6.3
1/2″ 12.7
3/8″ 9.5
1″ 25.4
1 1/2″ 38.1
5/8″ 15.9
3/4″ 19
1 1/4″ 31.8
1 3/4″ 44.5
2 1/2″ 63.5
2″ 50.8
3″ 76.2

Monel Coil equivalent material

Standards Country Monel 400 Monel K-500
UNS North America N04400 N05500
WNR Russia 2.4360 2.4375
ASTM America ASTM B127 ASTM B127
ASME Australia ASME SB127 ASME SB127
JIS Japan NW 4400
BS United Kingdom NA 13
GOST Russia МНЖМц 28-2,5-1,5
AFNOR France NU-30M
EN Europe NiCu30Fe
AMS United States AMS 4544

Mechanical properties of Monel annealed plate

Tensile Strength Yield Strength (0.2%Offset) Elongation
Psi – 80,000 , MPa – 550 Psi – 35,000 , MPa – 240 40 %

Monel sheets chemical composition

C Mn Si S Cu Fe Ni
0.30 max 2.00 max 0.50 max 0.024 max 28.00 – 34.00 2.50 max 63.00 min

Monel Plate Properties

Types of Monel metal sheet

Monel plate

Monel plate

ASTM B127 monel coil

ASTM B127 Monel coil

Monel alloy strip

Monel alloy strip

k-monel foil

k-Monel foil

Monel steel annealed plate

Monel steel annealed plate

ASME SB127 monel rolling plate

ASME SB127 Monel rolling plate

Monel metal hot-rolled plate

Monel metal hot-rolled plate

k-monel cold-rolled plate

k-Monel cold-rolled plate

Monel alloy shim stock

Monel alloy shim stock

Gauge chart of ASTM B127 Monel rolling sheets

Gauge Monel sheets
Gauge Decimal (inches)
26 0.0187
30 0.0125
24 0.0250
20 0.0375
22 0.0312
18 0.0500
14 0.0781
16 0.0625
12 0.1094
9 0.1562
11 0.1250
10 0.1406
8 0.1719

Monel sheet thickness tolerance

Tolerance up to & under nominal thickness t (mm)
Width w (mm) 4.5<t <6.0 8.0<t <10.0 6.0<t <8.0 2.5<t <4.5 10.0<t <12.5 12.5<t <16.0 16.0<t <20.0 20.0<t <25.0 25.0<t <30.0 30<t <40.0
2400< w <2700 0.80 0.80 0.80 0.80 0.90 1.0 1.1 1.3 1.7
1200< w <1500 0.25 0.35 0.30 0.20 0.38 0.80 0.80 0.90 1.0 1.4
2700< w <3000 0.80 1.0 0.90 1.0 1.0 1.1 1.3 1.4 1.8
w < 1200 0.23 0.32 0.30 0.20 0.35 0.80 0.80 0.80 1.0 1.4
2100< w <2400 0.80 0.80 0.80 0.80 0.80 0.90 1.0 1.1 1.5
1500< w <1800 0.28 0.38 0.32 0.20 0.40 0.80 0.80 0.90 1.1 1.5
1800< w <2100 0.30 0.40 0.36 0.20 0.45 0.80 0.80 0.90 1.1 1.5

ASME SB127 Monel cold rolled plate tolerances on width

Tolerance (mm)
Nominal length (mm) 1200 < w  < 1500 w < 1200 w > 1500
Trimmed edge Plus 5 3 5
Minus 0 0 0
Mill edge Plus 20 20 20
Minus 0 0 0

Monel alloy sheet tolerances on length

Nominal length (mm) L < 2,000 2,000 < L < 8,000 L > 8,000
Tolerance(mm) Minus 0 0 0
Plus 10 0.005 times L 40

Size chart of Monel alloy rolling plate

Monel plate stocked sizes
Size (in mm) Size (in inches)
76.2 3
3.18 0.125
3.96 0.156
28.6 1.125
12.7 0.500
6.35 0.250
22.2 0.875
3.40 0.134
19.1 0.750
9.53 0.375
7.92 0.312
15.9 0.600
25.4 1
4.75 0.187
31.8 1.250
44.5 1.750
38.1 1.500
63.5 2.500
50.8 2

Monel plate HS code

Material HS code
Monel plate 75022020

K-Monel plate weight chart

Gauge Weight (lb/ft2)
22 1.26
24 1.008
8 6.93
20 1.512
18 2.016
11 5.04
16 2.52
26 0.756
14 3.15
12 4.41
10 5.67

You can use Monel plate weight calculator or contact above Monel sheet suppliers for other size weight chart

Delivery location and schedule for ASTM B127 Monel clad plate

Note: below table is published based on data collected by genuine suppliers

Export to Price variations and estimated delivery
Saudi Arabia  5 % extra | 3 to 5 days
Cyprus  5 % extra | 45 days
Algeria  5 % extra | 45 days
Angola  5 % extra | 45 days
Sudan  5 % extra | 30 days
Equatorial Guinea  5 % extra | 45 to 60 days
The Republic Of Congo  5 % extra | 45 to 60 days
Oman/ Qatar  5 % extra | 3 to 5 days
Gabon  5 % extra | 45 to 60 days
Canada  5 % extra | 45 days
Mexico  5 % extra | 45 days

Monel strip dimensions

Note: below table is published based on data collected by genuine suppliers

KG P/M2 8.1 27.0 6.3 4.5 10.8 28.0 18.0 14.4
Dimension (mm) 0.9 X 1219 X 3048 3 X 1200 X 3000 0.7 X 1219 X 3048 0.5 X 1000 X 2000 1.2 X 1219 X 3048 3.18 X VARIOUS ANN 2.0 X 1219 X 3048 1.6 X 1200 X 3048

monel plate

Choose the stocking distributor of Monel annealed plate and foil in Dubai, check the application


The price of a Monel alloy rolling plate of Indian and European origin in the UAE depends on the thickness, size, and grade of the material. For instance, a 10mm thick, 1m x 1m plate of 400 grade from India costs around AED 1,500. But a similar plate of the same thickness, grade, and size from Europe costs around AED 2,000.

The prices are subject to change, so it is always best to contact Monel plate suppliers for the latest quotes.
Employ these tricks and hacks to save costs when purchasing a Monel metal annealed plate from suppliers in UAE –

  • Buying plates in larger quantities can often lead to discounts or better pricing per unit.
  • Compare prices from multiple suppliers in UAE to ensure you are getting competitive rates for the products.
  • Discussing your needs with suppliers can help determine the most cost-effective options without compromising performance.
  • Proper handling, storage, and maintenance of plates can help reduce waste, prevent damage, and extend their lifespan.

A Monel plate exhibits several properties that differentiate them from other nickel alloy grades. These plates can efficiently resist corrosion in environments such as seawater, acids, alkalis, and industrial gases.

A Monel sheet possesses excellent mechanical strength and can sturdily withstand extreme conditions. They have higher tensile strength compared to other nickel alloys which makes them perfect for applications that require structural integrity.

These plates expand and contract less with temperature changes, unlike other nickel alloy grades. This property can be advantageous in applications where dimensional stability is critical.

Monel coil is utilized in a wide range of applications due to its unique properties and excellent performance in various environments. These sheets find extensive use in the marine industry due to their exceptional resistance to seawater corrosion. The Monel strip is also employed in various aerospace and defense applications.

Compare the prices of monel hot rolled and cold rolled plates by two or more reputable traders in GCC countries who provide quick delivery and check weight calculation
  • These plates usually have lower thermal conductivity as opposed to some other popular materials such as copper or aluminum plates.
  • Some Monel alloys, such as Monel 400, can become brittle at low temperatures, especially below -100°C (-148°F).
  • The limited availability of these plates can result in longer lead times or higher procurement costs, particularly for custom or non-standard sizes.
  • Lastly, these plates can be time-consuming and challenging to machine compared to some other materials.

Monel alloys are known for their work-hardening characteristics which means they can become harder and tougher during machining operations. This work-hardening drawback leads to increased tool wear, reduced cutting speeds, and the need for specialized machining techniques.

Learn more about the prime monel shim stock and rolling sheet in detail, including its uses, price comparison in India and china
  • The plates exhibit excellent resistance to corrosion and are suitable for use in aggressive environments.
  • They can withstand the effects of erosion and cavitation which prolongs the lifespan of the equipment.
  • These plates show low magnetic permeability and are advantageous in applications where magnetic interference needs to be lowered.

Monel metal alloy shim stock typically shows good performance within the temperature range of -200°C or -328°F to upto 550°C or 1022°F.

Checkout the grades and types of monel plates, don’t forget to compare a price of our verified suppliers of monel alloy sheets