Monel screws is a sharp pointed pin having a raised helical thread having a slotted head. The Screws are the most versatile fasteners that can be easily affixed either permanently or temporarily. The Monel Flat Head Screw can be connected with a screwdriver or wrench. These screws have excellent strength and are available in plain and coarse threaded specifications. Tek Screw can easily fasten with wood, concrete, plastic, steel, etc. These screws have good resistance to corrosive media and oxidative reducers. The Self Drilling Screw are coated with protective material that allows them to be used across harsh environmental conditions. The Monel Concrete Screws have enhanced strength and are available in a range of sizes as per customer requirements.
Monel wood screws and Alloy 400 Screws suppliers in UAE
Monel screws American standard
Buy Monel 400 Screws & bibb screws at low prices from verified suppliers in Middle East countries. Also check Monel alloy drywall screws torque chart, sizes and dimensions
Monel wood screws specification
| Monel screws size |
Standard length of Monel wood screws screws |
Monel alloy drywall screws life |
- Imperial screw: 1/4″ to 4″
- Metric screw: M1.2 – M48
- Length: 12 – 1200mm (1/2″ – 4.0″)
Contact above listed Monel screws suppliers & manufacturers for different lengths |
- Deck screws : 2 – 2½”
- Drywall screws: 1/2, 1-1/4, 1-3/8, 1-5/8 inch
- Set screws: 1/16″ – 6″
- Self tapping screws: 300mm max
|
|
| Points of Monel k500 set screws |
Drill point of Monel self tapping screws |
Meet standard |
- Cup
- Knurled cup
- Flat
- Half dog
- Full dog
- Cone
|
- Type 17 A-milled point
- Type A
- Type AB
- Type AB milled point
- Type B
|
- ASME – USA
- JIS – Japan
- AS3566 – Australia
- DIN – Germany
- ISO – America
|
| Alloy 400 screws thread class |
Head types of Monel alloy K500 hexagon screw |
DIN 2.4375 screw full form |
- Class 1A (Loose fit)
- Class 2A (Medium fit)
- Class 3A (Tight fit)
- 5 CSF
- 5 ONF
- 5 HF
- 2G
- 3G
- 4G
- 6G
- 8G
- custom
Contact above Monel screws suppliers & distributors for high-pressure environments |
- Phillips drive
- Frearson drive
- Combination drive
- Hex / Socket / Allen drive
- Hex head
- Flat
- Oval
- Hex washer head
- Slotted hex washer
- Button head
- Pan
- Truss
- Slotted drive
|
- SEMS – Pre-made screw and washer
- SMS – Sheet metal screw
- WS – Wood screw
- SDS -Self-Drilling screw
- MS – Machine screws
- CSS – Counter sunk screw
|
| Monel alloy drywall screw end |
Surface treatment of Monel countersunk screw |
Monel alloy tek screw DIN standard – Europe |
- Milled end
- Semi-cone point
- Half point
- Sheared end
- Chamfer end
- Gimlet point
- Chisel point
- Cone point
- 45 degree angle cut
|
- Hot dip galvanized
- Black oxide
- Cadmium
- PTFE / Teflon
- Mechanical
- Electroplating
- Oil
- Nickel plated
- Zinc nickel
- Plain
- Yellow zinc plated
- Green finish
- Black finish
- Clear zinc plated
|
- DIN 916
- DIN 931
- DIN 933
- DIN 960
- DIN 912
- DIN 84
- DIN 85
- DIN 961
- DIN 7984
|
| Alloy 400 screws manufacturing method |
Monel alloy K500 grades |
Monel bibb screws melting point |
- Cold forged
- Hot forged
- CNC machined
Check price with genuine Monel screws suppliers in UAE, quick delivery to Mauritius, Saudi Arabia (KSA), Morocco, Egypt & Tunisia |
- 400 (UNS N04400)
- K500 (UNS N05500)
|
|
| Check dimensions of Monel alloy hex head screw |
Monel set screw ISO specification – UK |
Alloy 400 screws ASME standard – USA |
|
|
|
|
Standard types of Monel screws
Monel Alloy Hex Head Screw
Monel Set Screw
Monel Countersunk Screw
Monel Hex Set Screw
Monel Wood Screws
Monel Machine Screws
Monel Bibb Screws
Monel Self Tapping Screws
Monel Alloy Drywall Screw
Monel Concrete Screws
Monel Alloy Tek Screw
Monel Alloy Self Drilling Screw
- Monel machine screws
- Allen cap screws
- Set screws
- Werkstoff no 2.4375 flange 12-point screws
- Hexagon screw
- Nickel alloy K500 hex cap screws
- Monel self tapping screws
- Self drilling screws
- Monel alloy lag screw
- UNS N05500 deck screws
- Countersunk slotted screws
- Monel alloy 400 fully threaded screws
- Sheet metal screws
- Anchor screws
- Werkstoff no 2.4360 coach screws
- Cap screw
- K500 Monel grub screws
- Alloy K500 wood screws
- Monel concrete screws
- Monel alloy self drilling screw
- Alloy 400 panel screws
- Thread cutting machine screws
- Socket screws
- Nickel alloy 400 masonry screws
- Sammys screws
Types of Monel alloy socket set screws
- Cone point set screws
- Oval point set screws
- Low head socket cap
- Monel 400 cup point set screws
- Socket shoulder cap screws
- Flat socket cap
- UNS N04400 button socket cap
- Monel brass tip set screws
- Alloy K500 knurl cup set screws
- Slotted set screws
- K500 Monel dog set screws
- Monel metal pipe plugs
- Monel alloy flat point set screws
- Nylon tip set screws
UNS N04400 screws torque chart
| Nominal Diameter ( inch ) |
Torque ft – lb ( Dry ) |
Threads / inch |
Torque ft – lb ( Lubricated ) |
| 1/4 “ |
4.2 |
20 |
3.1 |
|
4.7 |
28 |
3.5 |
| 5/16 “ |
8.5 |
18 |
6.4 |
|
9.4 |
24 |
7.1 |
| 3/8 “ |
15.1 |
16 |
11.3 |
|
17.1 |
24 |
12.8 |
| 7/16 “ |
24.2 |
14 |
18.1 |
|
27.0 |
20 |
20.3 |
| 1/2 “ |
36.9 |
13 |
27.6 |
| 9/16 “ |
53.2 |
12 |
39.9 |
|
59.3 |
18 |
44.5 |
| 5/8 “ |
73.4 |
11 |
55.1 |
|
83.2 |
18 |
62.4 |
| 3/4 “ |
131 |
10 |
98 |
|
145 |
16 |
109 |
| 7/8 “ |
210 |
9 |
158 |
|
232 |
14 |
174 |
| 1 “ |
315 |
8 |
236 |
|
353 |
14 |
265 |
| 1-1 / 4 “ |
548 |
7 |
411 |
|
607 |
12 |
455 |
| 1-1 / 2 “ |
954 |
6 |
715 |
|
1073 |
12 |
805 |
Monel metal screws chemical composition
| Grade |
S,Sulfur |
Ni,Nickel |
Cu,Copper |
Si,Silicon |
Fe,Iron |
C,Carbon |
Mn,Manganese |
Ti,Titanium |
| Monel 400 |
0.024 maximum |
63.0(min)-70.00(max) |
Remainder |
0.50 maximum |
2.50maximum |
0.3 maximum |
2.00 maximum |
– |
| Monel k500 |
0.010 maximum |
63.0 minimum |
27.0(min)-33.0(max) |
0.5 maximum |
2.00 maximum |
0.25 maximum |
1.5 maximum |
0.35(min)-0.85(max) |
Monel 400 screws mechanical properties & strength
| Grade |
Density |
Elongation |
Tensile Strength |
Melting Point |
Yield Strength |
| Monel 400 |
8.8 gm/cm3(0.318 lb/in3) |
60%-35% |
75ksi-90ksi |
1350 °C(2460 °F) |
25ksi-50ksi |
| Monel k500 |
8.44 g/cm³(0.305 lb/in³) |
20% |
Megapascals-1100,Psi – 160000 |
1350 °C(2460 °F) |
Megapascals-790,Psi – 115000 |
Alloy 400 screws equivalent
| Grade |
EU
EN |
USA
UNS |
Germany
DIN,WNr |
Japan
JIS |
France
AFNOR |
England
BS |
Russia
GOST |
| 400 |
NiCu30Fe |
N04400 |
2.4360 |
NW 4400 |
NU-30M |
NA 13 |
МНЖМц 28-2,5-1,5 |
| K500 |
– |
N05500 |
2.4375 |
– |
– |
– |
– |
Monel k500 screws DIN standard
| DIN 914 |
Monel alloy socket set screws with cone point |
| DIN 933 sz |
K500 Monel hexagon cap screws with slot |
| DIN 961 |
Werkstoff no 2.4375 hex cap screws, metric fine thread – full thread |
| DIN 923 |
Nickel alloy 400 slotted pan head screws with shoulder |
| DIN 912 |
Monel socket head cap screws |
| DIN 933 |
UNS N05500 hexagon cap screws fully threaded |
| DIN 964 a |
DIN 2.4375 slotted oval head machine screws |
| DIN 913 |
Monel metal socket set screws with flat point |
| DIN 966 a |
Monel k500 cross recessed oval head machine screws |
| DIN 915 |
UNS N04400 socket set screws with dog point |
| DIN 920 |
Monel 400 slotted pan head screws, small head |
| DIN 916 |
Alloy 400 socket set screws with cup point |
| DIN 921 |
Werkstoff no 2.4360 slotted pan head screws with large head |
| DIN 927 |
Monel alloy 400 slotted shoulder screws |
| DIN 931 |
Alloy K500 hexagon cap screws partially threaded |
| DIN 960 |
Nickel alloy K500 hex cap screws, metric fine thread – part thread |
| DIN 963 a |
Monel alloy K500 slotted flat head machine screws |
| DIN 965 a |
Monel alloy K500 cross recessed flat head machine screws |
Request pricing directly from Monel Machine Screws & self tapping screws manufacturers for the lowest price and assured high quality of Monel alloy lag screw in Dubai, view its shear capacity
Screws don’t have any shear values like tensile and yield strength. The Monel Bibb Screws shear capacity can be estimated by taking 60% of ultimate tensile strength.
Monel wood screws can be measured by checking the diameter and length of the fastener. Wood Screw diameter is calculated by measuring the distance from the outer thread of one side to the other. This is called the major diameter while measuring the bottom cavity of the threads determines its minor diameter. The length can be calculated from the flat part of the head to the blunt end of the screw.
The torque of a screw is the twisting force measuring the force multiplied by the distance. Monel Machine Screws have a tightening torque between 0.9nm to 285.1nm.
Check the uses of monel concrete screws and tek screws as per ASTM F467
A Monel self tapping screw can easily tap into a hole and affix two materials efficiently. Self Tapping Screws can either be thread-formed or thread-cut in the power transmission industry.
Looking for a the monel flat head screw importers in United Arab Emirates? Also refer to monel alloy self drilling screws weight chart as per ASME SF 467
Monel alloy screw of the M4 screw are 8.8 mm2 per stress area. The Drywall Screw have a minimum proof load of 204 kg.
Table of Content