Monel threaded rod

Monel Threaded Rod

A Monel threaded rod is a fastener grade that is fully threaded on its length. The Monel Threaded Rod is a superalloy grade designed with a superior chemical content of nickel, copper, and other alloys. This Monel Hollow Threaded Rod has good resistance to an array of corrosive and oxidative reducers. These rods require nuts to securely affix them for prolonged periods. Monel Alloy Full Threaded Rod has good strength and performance. These rods have outstanding mechanical properties and tolerances. The Monel Double Ended Studs are available in a range of sizes to suit different requirements.

Verified Supplier

Verified manufacturers and stockists

available 9 cars

Monel stud bolts and tie rod suppliers in UAE, check its price list and length

Monel threaded stud specification


Monel Threaded Rod Specifications

Diameter Size chart Length
  • Monel 400 threaded rod diameter: 2-56 to 2″
  • 5 – 60mm
  • UNS N04400 tie bolt all thread: ¼” to 4″
  • Length: up to 61″
  • DIN 2.4360 fully threaded stud: ¼” to 2 ½”
  • 1 meter
  • 2 meter
  • 3 meter
  • 3 feet
  • 6 feet
  • 10 feet
  • 12 feet
Grades DIN 2.4360 acme threaded rod ASTM standard Temperature range
  • Monel 400 (UNS N04400/ 2.4360)
  • Alloy k500 (UNS N05500/ 2.4375)
  • Monel 401 (UNS N04401)
  • Monel 404 (UNS N04404)
  • Monel R-405 (UNS N04405)
  • Monel 502 (UNS N05502)
  • ASTM B164 UNS N04400
  • ASME SB 164 UNS N04400
  •  Up to 800°F ·1000°F
Monel stud bolt thread class Alloy 400 stud bolt types UNS N04400 threaded rod types
  • Class 1A (Loose fit)
  • Class 2A (Medium fit)
  • Class 3A (Tight fit)
  • 5 CSF
  • 5 ONF
  • 5 HF
  • 2G
  • 3G
  • 4G
  • 6G
  • 8G
  • custom

Contact above Monel threaded rod suppliers, manufacturers & distributors for custom thread

  • Hub studs
  • Tap end stud bolts
  • Continuous threaded stud bolts
  • Blade studs
  • Monel welding studs
  • Double end stud bolts
  • Fully threaded studs
  • UNC stud bolt
  • Reduced shank stud bolts
  • Knurled stud bolt
  • Exhaust stud bolt
  • Fully threaded rod
  • Double ended threaded rod
  • Tap end threaded rod
  • Right and left hand threaded rod
  • Extra fine threaded rod
  • All Thread rods

Get best price for South Africa, Oman, Qatar, USA, UAE, Nigeria & Saudi Arabia from genuine Monel threaded rod suppliers

Thread diameter Threads directions Thread start
  • UNC threads #4 to 4″
  • UNF threads #4 to 1-1/2″
  • 8 UN threads 1-1/8 to 4″
  • Acme threads 1/4 to 5″
  • Right Hand
  • Left Hand
  • Single-start
  • Two-start
  • Multiple-start
Testing & certificates Thread types All thread rod end
  • Rockwell / Brinell Hardness test
  • Microstructure Analysis
  • MTC 3.1
  • Tensile test
  • Charpy V-notch test
  • Impact testing
  • UNEF
  • UNJ
  • 12-thread series (12-UN)
  • Coarse thread (UNC)
  • Fine Thread (UNF)
  • 8-Thread Series (8UN)
  • BSF
  • Metric coarse
  • Metric fine
  • ACME
  • Trapezoidal
  • Semi-cone point
  • Sheared end
  • Chamfer end
  • Half point
  • Cone point
  • 45 degree angle cut
  • Milled end
  • Gimlet point
  • Chisel point
Meet standards Applications Surface treatments
  • ASME B1.1
  • DAST 021
  • IS
  • ISO
  • ASME B1.5
  • ASME B18.31.2
  • DIN 976
  • DIN 975
  • DIN 2510
  • DIN 103
  • DIN 13-52
  • ASTM A722
  • BS
  • ASME B16.5
  • Solar plants
  • Ship building
  • Bridge construction
  • Offshore
  • Flange joints
  • Petrochemical plants
  • Rigs
  • Automotive industry
  • Aerospace
  • Wind mills
  • Mechanical
  • Oil
  • Nickel Plated
  • Yellow Zinc Plated
  • Clear Zinc Plated
  • Cadmium
  • Zinc Nickel
  • Plain
  • Hot Dip Galvanized
  • Black Oxide
  • Green Finish
  • Black Finish
  • PTFE / Teflon
Manufacturing method
  • Cold Forged
  • Hot Forged
  • CNC machined

Trusted nace tested monel alloy threaded bar and allthread manufacturers in Dubai in all popular sizes at the best price

Monel alloy stud types

  • Radius End Stud
  • 2.4360 Monel 400 Unthreaded Stud (Blank)
  • Single End Stud
  • Alloy 400 Double End Stud
  • Tap End Stud
  • SB 164 UNS N04400 Full Thread Stud
  • Chisel Point Stud
  • Reducing Stud

Recommended nuts for nickel alloy 400 stud bolts

Flange material Stud bolts Nuts
ASTM B564 ASTM F468/F468M ASTM F467

Monel threaded rod strength

Strength Mpa
Tensile
  • 517-620
Yield
  • 172-345

Nickel alloy 400 tie rod equivalent standard

Monel 400 R405 K500 Origin of Country
UNS N04400 N04405 N05500 USA
DIN, WNr 2.4360 2.4375 Germany

ASTM B164 UNS N04400 double end stud bolts chemical composition

Elements Carbon Manganese, Mn Sulphur Silicon, Si Nickel Copper Iron
Monel 400 (%) 0.30(max) 2.00(max) 0.24(max) 0.50(max) 63.0(max) 28.0(min)-34.0(max) 2.50(max)
Monel R405 (%) 0.30(max) 2.00(max) 0.24(max) 0.50(max) 63.0(max) 28.0(min)-34.0(max) 2.50(max)
Monel K500 (%) 0.30(max) 2.00(max) 0.24(max) 0.50(max) 63.0(max) 28.0(min)-34.0(max) 2.50(max)

Monel alloy 400 acme rod mechanical properties

Property Tensile Strength(megapascals) Yield Strength(megapascals) Elongation in % Brinell, Hardness
Monel 400 517-620 172-345 60-80 110-149
Monel R405 517-620 172-345 60-80 110-149
Monel K500 517-620 172-345 60-80 110-149

Monel Threaded Rod Properties

Monel stud bolt metric thread sizes

Thread Size Thread Pitch (milimeter) Major Diameter Tapping Drill Size
M3 0.5 3 2.5
M4 0.7 4 3.3
M5 0.8 5 4.2
M6 1 6 5
M8 1.25 8 5.8
M10 1.5 10 8.5
M12 1.75 12 10.2
M16 2 16 14
M20 2.5 20 17.5

Get a reasonable cost from verified Monel studs suppliers in the Middle East, view monel double ended studs yield strength

The yield strength of the Monel threaded bar is calculated using the formula Ymin x a = syield. The Monel Alloy Threaded Bar has a minimum yield strength of 240mpa.

A threaded rod is designed in standard lengths of 3, 6, 10, and 12 lengths. The Monel Alloy Acme Threaded Rod has a thread sizes between M3 to M20 as per its thread sizes.

If you want to find Monel stud bolt size, check the diameter and length of the bolts. The Monel Stud Bolts diameter is calculated by measuring its outer thread from all its sides to find the minor diameter. The Monel Alloy Tap-end Studding bottom cavity can be checked to measure its minor diameter. The lengths of the bolts can be calculated from the head to the blunt end of the bolt.

View Monel full threaded rod and tap-end studding stock standard sizes, specification and price in Middle East and Asia

The Monel allthread is a versatile fastener that has threads on all its surface. Monel Allthread is used in building and maintenance applications. These threads help stabilize different objects and allow for efficient fastening in the system.

Monel Acme Threaded Rod according to DIN, ASTM, SAE, AISI international standards

A Monel stud is threaded on all its length except its middle section. The IS standard for a Monel Stud is IS 1367, which covers technical supply conditions of threaded fasteners.